Tender For B.O.Q For Upgradation Of Tourism Huts And Staff Quarters By Way Of Electrical Works/ Ac At Sonamarg
Tender Value
25.16 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
2 days left
EMD
50325
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for B.O.Q For Upgradation Of Tourism Huts And Staff Quarters By Way Of Electrical Works/ Ac At Sonamarg
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 2X 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor (Polycab Green/Havell Life guard/ Fenolex/ Salzer/RR/Apar make as desired by engineer incharge ) single core cable in surface / recessed medium class PVC conduit, ( excluding the cost of conduit), complete, with modular switch Antibacterial series ( Legrand /ABB / Siemens make.), modular plate,suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 2 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch,modular plate, suitable GI box , connections etc. as required. Modular Switch & Socket:- Antibacterial series ( Legrand /ABB / Siemens make.) |
| 3 | Wiring for light/ power plug with 2X4 sq. mm + 1X 4 sq. mm earth wire , FRLS/HFFR PVC insulated copper conductor (Polycab Green/Havell Life guard/ Fenolex/ Salzer/RR/Apar make as desired by engineer incharge )) single core cable in surface/recessed medium class PVC conduit.(( excluding the cost of conduit), complete |
| 4 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, Antibacterial series ( Legrand /ABB / Siemens make.)connections etc. as required. |
| 5 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Modular Switch & Socket:- Antibacterial series ( Legrand /ABB / Siemens make.) |
| 6 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" curve including connections, painting etc. as required.Antibacterial series ( Legrand /ABB / Siemens make.) |
| 7 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor (Polycab Green/Havell Life guard/ Fenolex/ Salzer/RR/Apar make as desired by engineer incharge ), single core cable in surface/ recessed medium class PVC conduit as required.( excluding the cost of conduit), complete |
| 8 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 9 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 10 | 2 X6 sq. mm + 1 X 6 sq. mm earth wire |
| 11 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 12 | 4 X 16 sq. mm + 2 X 6 sq. mm earth wire |
| 13 | Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required |
| 14 | Supplying and fixing of following sizes of medium class PVC conduit( Anchor/ Ravindra/ Eq. make)along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required, with cement plaster, wall putty , paint, complete |
| 15 | 25 mm |
| 16 | 32 mm |
| 17 | Supply and fixing of 25mm wide Medium Class PVC Casing & Capping (FRLS type) with necessary accessories such as saddles, couplers, tees, bends, and junction boxes, complete as per specifications. |
| 18 | Supply and fixing of wooden channel/ casing made from Kashmiri Budloo wood having2.6\\"- 3\\" width suitable for carrying out wiring for different circuits. |
| 19 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).(legrand / Schinider/ L&T ./ABB/equivalent standard make as directed by engineer incharge.) |
| 20 | 6 way (4 + 18), Double door |
| 21 | Supply installation testing and commissioning of 15 W + LED Surface/recess, Mounted light luminary fitting,square or round shape with minimum system lumen efficacy ≥ 120 lm/Watt with Pressure Die cast Aluminium Housing and Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years ,which includes replacement of fixtures of Philips/ Helonix/Wipro / Regent make / sample to be approved before installation.. |
| 22 | Supply installation testing and commissioning of 18 W + LED Surface/recess, Mounted light luminary fitting,square or round shape with minimum system lumen efficacy ≥ 120 lm/Watt with Pressure Die cast Aluminium Housing and Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years ,which includes replacement of fixtures of Philips/ Helonix/Wipro / Regent make / sample to be approved before installation.. |
| 23 | S/F testing and comm. Of surface mounted LED Batten 20 watt-22 watt +- 1watt commercial series (cool/warm) 4 ft. with minimum system lumen efficacy of ≥ 120 lm/Watt with Pressure Die cast Aluminium Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. Philips/ Helonix /Wipro make. sample to be approved before installation. |
| 24 | S/F testing and comm. Of MCB's 10 kA of the below mentioned capacities in sub main controls legrand C curve/ Schinider Acti 9/ L&T ./ABB make as directed by engineer incharge. |
| 25 | a) 6-32 Amp SP MCB |
| 26 | b) 40-63amp DP MCB |
| 27 | b) 40-63amp TPN MCB |
| 28 | Supply installation testing and comm. Of 200-250mm sweep exhaust fan Shutter type of havell /Bajaj/Crompton make as directed by engineer incharge, including making of space in wall/ window as per site requirement and necessary connections. |
| 29 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, ceiling fan with 3 No. Aluminium blades, 30 cm long down rod, 2nos. canopies, shackle kit, Power Factor not less than 0.9, Service Value including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, and including iron hook complete . USHA /Havells /Crompton/orient make as directed by engineer incharge. |
| 30 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.Antibacterial series ( Legrand /ABB / Siemens make.) |
| 31 | Supply fixing testing and comm. Of backlite holder /batten holder/angle holder/ceiling rose SSK/Anchor make incl. PVC Block. |
| 32 | Providing of Chemical earthing as per IS standards by way of digging 10' deep pit then embedding 3 meter G.I Earthing electrode , 80mm dia. connecting the plate with main control board by 10 SWG copper wire with 1/2\\" dia. Full thread brass nut and bolt and washers. Refilling of pit with chemical compound. |
| 33 | S/I testing and comm. Of single phase 7 KVA 50HZ oil cooled(Transformer oil is to be provided with stabilizer conforming to IS 335,IEC296)) unbalanced type servo voltage stabilizer(A.E / Cosco/Chinar/ Electricfield make) having an input voltage ranging from 90V to 240 V ( phase to Neutral) and balanced output voltage of 220V, +/- 1%. ( Test certificate to be provided by the manufacturer) |
| 34 | Supply installation testing and commissioning of energy efficient 1.5 Ton inverter type split Air Conditioning system ( Hot and cold) suitable for operation in sub-zero temperature ( minus 15 degree Cel. to 40 Deg Cel.) ,operating on AC supply single phase 220 V . The indoor unit fitted on wall by employing suitable clamps and the outdoor unit fitted on the wall by using suitable angle iron stand fitted with nuts/bolts outside the room to avoid noise, including standard length of suitable size copper tubing covered with nitrilic foam, topping up with refrigerant for additional length of piping if required, PVC flexible drain pipe, suitable capacity 3 core sheathed/ pvc insulated coper cable and a battery operated wireless remote unit. the job also includes repairs to walls wherever the same are cut and the AMC of AC for a period of one and a half year from date of successful commissioning.(O-general/Mitsubishi/ Eq. standard make as directed by the engineer incharge. ) |
| 35 | Supply installation testing and commissioning of energy efficient 1.8-2 Ton inverter type split Air Conditioning system ( Hot and cold) suitable for operation in sub-zero temperature ( minus 15 degree Cel. to 40 Deg Cel.) ,operating on AC supply single phase 220 V . The indoor unit fitted on wall by employing suitable clamps and the outdoor unit fitted on the wall by using suitable angle iron stand fitted with nuts/bolts outside the room to avoid noise, including standard length of suitable size copper tubing covered with nitrilic foam, topping up with refrigerant for additional length of piping if required, PVC flexible drain pipe, suitable capacity 3 core sheathed/ pvc insulated coper cable and a battery operated wireless remote unit. the job also includes repairs to walls wherever the same are cut and the AMC of AC for a period of one and a half year from date of successful commissioning.(O-general/Mitsubishi/ Eq. standard make as directed by the engineer incharge. ) |
| 36 | Supply, Installation, testing and commissioning of relay type voltage stabilizer suitable for 1.5-2 Ton AC operating from input voltage 90-260 Volts thereby producing output voltage of 230 volts +/- 3 % ( Vguard/ Livgaurd/LG make) |
| 37 | Supply installation testing and comm. of flood light 100 W ( warm, white ), Epoxy powder coated die-cast aluminium housing (LM24) with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant. PG9 gland is used for cable entry and provision for loopin-loopout class 1, IP66, IK 07, , with high power LED's as light source with Built-In Potted IP67 electronic LED driver with APFC,lower THD, toughned glass and secondary lens,Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection upto 10kV With Built In SPD & other safety test as per IS 15885 Part-2/Sec 13, IEC60598-1. Preferred make: Philips/ Havell /Wipro/Crompton make. the job also includes the angle iron stand of suitable size to be grouted in cement concrete with hold fasteners complete job. |
| 38 | Supply installation testing and comm. of flood light 50 W ( warm, white ), Epoxy powder coated die-cast aluminium housing (LM24) with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant. PG9 gland is used for cable entry and provision for loopin-loopout class 1, IP66, IK 07, , with high power LED's as light source with Built-In Potted IP67 electronic LED driver with APFC,lower THD, toughned glass and secondary lens,Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection upto 10kV With Built In SPD & other safety test as per IS 15885 Part-2/Sec 13, IEC60598-1. Preferred make: Philips/ Havell /Wipro/Crompton make. the job also includes the angle iron stand of suitable size to be grouted in cement concrete with hold fasteners complete job. |
| 39 | Supplying, installation, testing and commissioning of Up-Down Decorative Wall Light fitting of Philips / Wipro / Jaquar or equivalent approved make, designed for aesthetic architectural illumination, providing both upward and downward light distribution for highlighting wall surfaces, columns, or façade features, complete with all required accessories for proper installation and operation.Technical Specifications:Type: LED Decorative Wall Light – Up-Down typeMounting: Wall-mounted (indoor/outdoor as specified)Light Source: Integrated LED module or LED lampWattage: 10W to 25W (2 x 5W / 2 x 10W typical)Input Voltage: 220–240V AC, 50 HzCCT (Colour Temperature): 3000K (Warm White) / 4000K (Neutral White) as approvedCRI (Colour Rendering Index): ≥80Body Material: Die-cast aluminium with powder-coated / anodized finishDiffuser: Tempered clear / frosted glass lensProtection Class: IP20 for indoor / IP65 for outdoor (as required)Accessories: Mounting bracket, junction box connector, screws, and complete wiring connections.Finish: Black / Grey / Silver / Designer finish as approved by Engineer-in-ChargeMake: Philips / Wipro / Jaquar / Equivalent approved make. |
| 40 | Supplying, installation, testing and commissioning of Decorative Wall Light fitting of Philips / Wipro / Jaquar or equivalent approved make, suitable for aesthetic indoor illumination in galleries, lobbies, corridors, or display areas, complete with LED light source and all required accessories for proper installation and operation.Technical Specifications:Type: Decorative Wall Mounted Luminaire (indoor type)Light Source: Integrated LED or LED lamp with holder (as per design)Wattage: 10W to 25W (as required)Input Voltage: 220–240V AC, 50 HzColour Temperature (CCT): 3000K / 4000K (Warm / Neutral White as specified)CRI (Colour Rendering Index): ≥80Housing: Die-cast aluminium / glass / polycarbonate with high-quality decorative finishFinish / Colour: Chrome / Matt / White / Designer finish (as approved)Mounting: Wall-mounted type with concealed wiring connection boxProtection Class: IP20 or higher, suitable for indoor useAccessories: Mounting brackets, fasteners, connector block, and other hardware complete in all respects.Make: Philips / Wipro / Jaquar / equivalent approved by Engineer-in-Charge. |
| 41 | Supplying, installation, testing and commissioning of Profile Lighting system , designed for precision illumination of artifacts, displays, and architectural elements in museum or gallery spaces.The system shall comprise high-efficiency LED profile luminaires mounted on aluminium track rails (surface / recessed / suspended type as required), complete with connectors, end caps, suspension kits, and all necessary accessories for proper installation and operation.Type: LED Profile Light (Track-mounted / Linear)Power Rating: 20W to 45W per fitting (as per design)Input Voltage: 220–240V AC, 50 HzColour Temperature (CCT): 3000K / 4000KColour Rendering Index (CRI): ≥90 (museum-grade colour accuracy)Beam Angle: Adjustable / fixed (as required, typically 24°–60°)Body Material: Extruded aluminium with powder-coated finish (Black / White)Track Type: 1-circuit or 3-circuit compatibleControl: Dimmable (DALI / 0–10V / phase cut as required)Accessories: Track rail, connectors, power feed unit, end caps, suspension brackets, junction box and wiring connections complete in all respects.Ingress Protection: IP20 or higherMake: Philips / Wipro / Havells / equivalent approved make. |
| 42 | Engaging of skilled labour for Dismentling of old damaged materials like wires in scraps, fixtures switches-sockets complete as directed by the engineer at site and stacking and handing over to concerned department including carrying out some repairing works etc. |
| 43 | Providing of Chemical earthing as per IS standards by way of digging 10' deep pit then embedding 3 meter G.I Earthing electrode , 80mm dia. connecting the plate with main control board by8- 10 SWG G.I wire with 1/2\\" dia. Full thread brass nut and bolt and washers. Refilling of pit with chemical compound. |
| 44 | S/L , testing and commissioning of PVC XLPE insulated alluminium armoured cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments.Havell/Eq. standard make as directed by engineer incharge and making end termination with brass compression gland and aluminium lugs of required size. |
| 45 | c)16 sq.mm 2 core |
| 46 | Supplying,Installation,Testing and Commissioning of CO2 Type Fire Extinguisher 4.5 Kg. Capacity ISI Mark(IS:15683)suitable for 'B' and 'C' class fires - inflammable liquids, gaseous fires like L.P.G. and acetylene, and electrical |
| 47 | Supply installation testing and comm.of invertor battery 150 AH/12 V Exide invatubular/ equivalent make. |
| 48 | Supply installation testing and commissioning of Sine Wave Inverter Capacity 1400-1600 VA, Supports two battery,24 Month Warranty Safe for sensitive appliances with Sine wave out-put, Inverter should run heavy loads like AC, Geyser, Photocopiers, Auto over-load handling capacity Installation and maintenance friendly Offers high quality and reliable power back-up solution for office and homes ,MCB for protection from Input mains,Bypass switch for supplying output directly from grid in case of Home UPS fault.Noiseless Operations with the help of low harmonic distortion, Intuitive Display to easily understand status of mains availability, battery status, etc.Comprehensive protection against short-circuit, reverse polarity, battery over-charge, deep-discharge etc.Adaptive Battery charging control system technology (ABCC) ensures faster battery charging and enhances battery life by around 70%.Supports a wide battery range, i.e. Flat Plate, Tubular & VRLA (SMF).praffered make Luminous/ Microtek/Exide. The job includes PVC Trolley for Housing 2 No Battries and Inveter. |
| 49 | Supply and fabrication of angle iron stand of Structural steel work in built up sections, and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 50 | S/L , testing and commissioning of PVC XLPE insulated alluminium armoured cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments.Havell/Eq. standard make as directed by engineer incharge and making end termination with brass compression gland and aluminium lugs of required size. |
| 51 | c)25 sq.mm 2 core |
| 52 | Earth work excavation for cable trench, 2 ft deep with an average breadth of 1.5ft and refilling of trench with excavated earth after laying of cable and ramming it properly excluding cost of cable. |
| 53 | Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panels,( 3 No.) duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.S. sheet steel , floor/wall mounted, vermin and dust proof, indoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of following switch gears, , Aluminium Bus Bar of various ratings after taking Derating factor into account, and other allied accessories etc. as required.( As per approved design,size may vary as per site requirement) |
| 54 | Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required. |
| 55 | Normal INCOMING: |
| 56 | a)125A 2P MCCB 25 KA including spreader links including spreader links, icu=ics=100% ( Adjustable thermal and Adjustable magnetic release ) Legrand/ Shinider/Semiens/ABB make. |
| 57 | b) 2 No. of Aluminium Bus Bar of 200 Amp. |
| 58 | c)Digital meters and phase indicators -1 set. |
| 59 | d) onload Change over switch 63 Amp for generator.Front operated. |
| 60 | e) 2 No. of Aluminium Bus Bar of 100 Amp. |
| 61 | c)Digital meters and phase indicators -1 set. |
| 62 | OUTGOING: |
| 63 | c) 40-63amp DP MCB |
| 64 | c) space for 6 way MCB's Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender