Water Resources and Irrigation Government Departments Closing in 12 days TDR #57370088

Tender For Construction Of Sumps, Intake Channels Including Providing Of Trash Guards And Allied Work For Hakabara Drought, Galibal Drought, Lis Darwazbal, Lis Bonikhan Hajin And Lis Kartargund, Check I Salam Khan, Naninara I &Ii, Shadipora Main, Dus

Issued by Government Departments · Ganderbal, Jammu and Kashmir
Tender Value
33.97 Lakhs
Estimated cost
Bid Submission
25 Sep 2026
12 days left
EMD
67940
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ganderbal → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of Sumps, Intake Channels Including Providing Of Trash Guards And Allied Work For Hakabara Drought, Galibal Drought, Lis Darwazbal, Lis Bonikhan Hajin And Lis Kartargund, Check I Salam Khan, Naninara I &Ii, Shadipora Main, Duslipora, Sonabern, Wangipora New, Panzinara, Zalpora Old, Dumkhan, Check Hakim Sadiq, Zalpora-Iii, Shateng, Sarai Dangerpora Of I&Fcd Sumbal Including Construction Of Washroom.

BOQ

Name of Work:- Construction of Sumps, Intake Channels including providing of Trash Guards and allied work for Hakabara Drought, Galibal Drought, LIS Darwazbal, LIS Bonikhan Hajin and LIS Kartargund, Check I Salam Khan, Naninara I &II, Shadipora Main, Duslipora, Sonabern, Wangipora New, Panzinara, Zalpora old, Dumkhan, Check Hakim Sadiq, Zalpora-III, Shateng, Sarai Dangerpora of I&FCD Sumbal including Construction of washroom.
Sl. No. Item Description
1Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil
2Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 min width) and for shafts, wells, cess pits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto1.5m,including getting out excavated earth and disposal of surplus excavated earth as directed 2.8.1 all kinds of soil
3Providing and laying in position stone soling including cost of stones
4Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
5Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
6Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete
7Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand)
8Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
9Providing and fixing ISI marked oxidized M.S. door latches conforming to IS : 5930 with screws etc. complete : 250x20x6 mm
10Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 100x10 mm
11Providing and fixing ISI: 12817 marked Stainless Steel Butt Hinges (heavy weight) with Stainless Steel screws etc. complete. 75x50x2.50 mm
12Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete : 125 mm
13Supplying, filling, spreading and leveling stone boulders of size range 5 cm to 20 cm, in recharge pit in the requir. thickness for all leads and lifts all complete as per direction of Engineer-in-charge.
14Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns
15Centering and shuttering including strutting, propping etc. and removal of form for: Suspended Floors , roofs, landings, balconies and access platforms
16Providing and laying in position specifi. grade of reinforced cement concrete incl.ing curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 non nominal size)
17Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and bi.ing all complete upto plinth level.
18Cement concrete flooring 1:2:4 (1 cement, 2 coarse sand: 4 grad. stone aggregate) finished with a floating coat of neat cement including cement slurry a. curing complete, but excluding the cost of nosing of steps etc. cornplete.50 mm thick with 20mm nominal size stone aggregate.
19Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
20Providing /Applying 12mm Cement plaster of mix: 1 : 6 (1 cement : 6 fine sand)
21Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.11.50.1 In colour such as White, Ivory, Grey, Fume Red Brown
22CERAMIC GLAZED TILES Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
23Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete
24Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
25Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
26Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class kail wood
27Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).First class kail wood
28Providing and fixing 0.40 mm thick GI sheet in panelled form for soffit, over 1.5\\" × 1\\" wooden framework, including providing and fixing timber framework, cutting,forming and fixing of GI sheet panels with nails and washers, jointing, wastage, labour, T&P and all necessary materials and accessories, complete in all respects as directed by Engineer-in-Charge
29Renewing glass panes, with wooden fillets wherever necessary : Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)
30Labour Mason (for plain stone work ) 2nd class
31Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With Galvanized M.S. Wire gauge with wire of dia 0.63
32Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.
33Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.
34Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution.
35Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.50 mm thick with zinc coating not less than 275 gram/m2
36Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin tap of approved quality and make, including painting of fittings and brackets, cutting and making good the wal Is wherever required:-18.7.4 White Vitreous China Flat backwash basin size 550.400 mm with single 15 mm C.P. brass pillar tap.)Complete job.
37Providing and fixing B Class ( Prince) PVC pipes of standard make for sewerage disposal including cutting of floors, walls, trenching and making good the same com pletewith putty, rubber washer and adhesive etc. 100mm.
3875 mm
3950 mm
40Providing and fixing B Class PVC fittings of standard make for sewerage disposal and making good the same complete with putty, rubber washer and adhesive etc. Bend 100mm.
41UPVC Plain bend 75mm dia
42UPVC Door bend 100mm dia
43UPVC Door bend 75mm dia
44PVC Reducer 100mm x 75mm.
45UPVC single equal Tee (with door)110x110x110 mm
46UPVC single equal Tee (with door) 75x75x75 mm
47UPVC Collar 100mm dia.
48UPVC Collar 75mm dia.
49UPVC Floor Trap 75mm .100mm dia
50UPVC Stays and clampsfor PVC Pipes 100mm dia.
51UPVC Stays and clampsfor PVC Pipes 75mm dia
52UPVC Vent Pipes75mm dia.
53UPVC Manhole cover 18\\"x18\\"
54Providing and fixing PPR pipes completewith PPR.fittingsand clamps, including cutting and makinggood the walls etc.:Internal work- concealed fixing the pipe with clamps at 1.00 meter spacing including cutting charges and making good the wall etc.,25 mm dia PN-16 pipenominal bore Medium
55Providing and placing on terrace (at all floor levels) polyethylene water storage tank.' 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank /Sint, Electroplast, Star, Lotusor equivalent having valid ISI license/. completelob
56Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931
57Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and orapproyed makeconforming to IS:8931
58Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to1S :8931
59Providing and fixing Racold make Vertical Manual 50 Litre capacity electric storage water heater (Gyeser), complete with glass-coated Incoloy heating element, thermostat, multi-function safety valve, ELCB facility, insulation, necessary inlet/outlet connections and all accessories, including installation, testing and commissioning, complete in all respects.
60Lighting Point:Providing and fixing of lighting points. One lighting point shall include wiring for lighting points in 1.5sq mm Pvc insulated copper wire and 2.5 Sq mm pvc insulated multi strand copper wire for lighting sub mains,6 Amp. One way switch 2mm thick Pvc conduit/ channel with bends, junction boxes etc,6 Amp S pole MCB,10 Amp DP MCB,2 way Db for housing MCB and Hylem sheet with wooden box recessed in walls with accessories.
61Heating Point:Providing and fixing of Heating points.One Heating point shall include wiring for heating points in 2.5sq mm Pvc insulated multi stranded copper wire and 4 Sq mm pvc insulated multi strand copper wire for heating sub mains,16 Amp. switch socket combined, 2mm thick Pvc conduit/ channel with bends, junction boxes etc,10 Amp S pole MCB,2 way Db for housing MCB and Hylem sheet with wooden box recessed in walls with accessories.
62Providing and fixing fan point complete with wiring in PVC conduit/channel, modular switch, electronic regulator, earthing, and supply & installation of fan of standard quality including all accessories, testing and commissioning, complete in all respects.
63Providing and installation MCB 32 amp of ISI Mark complete job
64Carriage of materials from sources to site of by Mech. Transport:-a) Stone/stone soling from 12Km av
65b) Stone/stone soling from 13Km av
66c) Stone aggregate from 12Km av i) 40 mm
67ii) 20 mm
68iii) 20 mm (30km)
69d) Stone aggregate from 13Km avi) 40 mm
70ii) 20 mm
71e) Sand from 2km
72f) Sand from 1km
73g) Bricks from Budgam---28km avg Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57370088
AUTHORITY Government Departments
TENDER VALUE 33.97 Lakhs
LAST DATE 25-09-2026
Authority
Authority Name Irrigation And Flood Control Department
Work Description Tender for Construction Of Sumps, Intake Channels Including Providing Of Trash Guards And Allied Work For Hakabara Drought, Galibal Drought, Lis Darwazbal, Lis Bonikhan Hajin And Lis Kartargund, Check I Salam Khan, Naninara I &Ii, Shadipora Main, Duslipora, Sonabern, Wangipora New, Panzinara, Zalpora Old, Dumkhan, Check Hakim Sadiq, Zalpora-Iii, Shateng, Sarai Dangerpora Of I&Fcd Sumbal Including Construction Of Washroom.
Basic Detail
Tender No ENIT04OF2026
Bidding Type Tender
Location
City Ganderbal
State Jammu and Kashmir
Key Dates
Publish Date 05 Sep 2026
Submission Date 25 Sep 2026
Open Date 26 Sep 2026
Finance
Tender Value 33.97 Lakhs
Tender Fee 500
EMD 67940
Exemption Not Available
Document List
6dd4d9db-f7b6-4175-bdf5-80c5ddcfd2c0.html
BOQ_1089612.xls
Tendernotice_1 (16).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 05, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 12 days
Sep 26, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 13 days

Tender Documents

Download All (ZIP) ↓
html

6dd4d9db-f7b6-4175-bdf5-80c5ddcfd2c0.html

xls

BOQ_1089612.xls

pdf

Tendernotice_1 (16).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders