Tender For Special Repair To Bldg No P-22 And T-88 Of Mh At Old Amritsar Cantt
Tender Value
48.31 Lakhs
Estimated cost
Bid Submission
26 Sep 2026
7 days left
EMD
97000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Amritsar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-22 And T-88 Of Mh At Old Amritsar Cantt
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 15-Sep-2026 | BOQ | BOQ | 26-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed. |
| 2 | Material and labour for brick work with sub-class 'B' bricks straight or curved on plan exceeding 6 metres mean radius built in cement mortar 1:4 complete all as specified and directed. |
| 3 | All as per Srl item No 2.00 here-in-before above but except bricksNote :- old dismantled serviceable bricks obtained from Srl item No 1.00 shall be reused after necessary cleaning of mortar |
| 4 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 5 | Material & labour for Virified Ceramic tiles 8mm/9mm thick light shade (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed of cement mortar 1:6 complete all as specified and directed. |
| 6 | Supply & fixing non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in cement mortar 1:6 & complete all as specified and directed. |
| 7 | Supply & fixing glazed ceramic coloured tiles 450x300mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in cement mortar 1:4 on brick surface complete all as specified and directed. |
| 8 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 9 | Material & labour for Steel gate of angle or other section with gusset plate, rails, braces etc complete to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete all as specified and directed. |
| 10 | Supply & fixing in repairs vitreous china wash hand basin white with flat back type size 550x400mm excluding taps chain and plug and porcelain stopper but including brackets CP waste coupling 32mm and PVC waste pipe 32mm dia including cutting for and pinning ends of brackerts complete all as specified and directed. |
| 11 | Supply & fixing in repair 15mm bore angle cock cast copper alloy of CP screwed down high pressure with crutch or butterfly handle complete all as specified and directed. |
| 12 | Supply & fixing 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down old unserviceable pipe complete all as specified and directed. |
| 13 | Supply & fixing 20mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down including taking down old unserviceable pipe complete all as specified and directed. |
| 14 | Material & labour Granite (of any type) work (table rubbed and polished) 20mm thick in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 15 | Supply & fixing for powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. (minimum thickness of powder coating 50 micron) |
| 16 | Supply & fixing Powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. (minimum thickness of powder coating 50 micron). |
| 17 | Supply & fixing powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed (minimum thickness of powder coating 50 micron). |
| 18 | Supply & fixing in Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 19 | Material & labour for Sheet glass, ordinary quality 5.5mm thick in square exc 0.5 sq. m in each pane including rubber packing and aluminium beading complete all as specified and directed. |
| 20 | Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed. |
| 21 | Material & labour for rendering 15 mm thick on fair/unfair faces of brick work or concrete surfaces in cement mortar 1:6 and to be finished even and smooth ( without using extra lime or cement) complete all as specified and directed. |
| 22 | Material & labour for rendering 15 mm thick on fair/unfair faces of brick work or concrete surfaces in cement mortar 1:4 and to be finished even and smooth ( without using extra lime or cement) complete all as specified and directed. |
| 23 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 5489:2004, Alkali & fungal resistance, dirt resistance interior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of interior primer applied @ 0.90 litre/ 10 sqm over new wall/ceiling surfaces complete all as specified and directed. |
| 24 | Material & labour Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including preparation of new surfaces complete all as specified and directed. |
| 25 | Complete removal of existing treatment of any description from wall surfaces and Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 5489:2004, Alkali & fungal resistance, dirt resistance interior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of interior primer applied @ 0.90 litre/ 10 sqm over wall/ceiling surfaces complete all as specified and directed. |
| 26 | Complete removal of existing treatment of any description from wall surfaces and Material & labour for Finishing walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 27 | Complete removal of existing treatment of any description from wall surfaces and Material & labour for Finishing walls with TEXTURE PAINTING with Dune Texture of Asian paints including Material & labour for preparation of surface plain and leveled and damp free complete all as specified and directed. |
| 28 | Supply & fixing in repair for PVC (SWR) pipes single110mm socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 29 | Dismantling Brick tiles/PCC tiles or terracing tiles, single layer on roofs ; Complete all as specified and as directed. |
| 30 | Demolition mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) ; Complete all as specified and as directed. |
| 31 | Material and Labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in padding concrete fair finish, roof kerbs or mud stops, rounded or chamfered on edges and like including weathering slight rounded and throating ; Complete all as specified and as directed. |
| 32 | Material and Labour for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc ; Complete all as specified and as directed. |
| 33 | Supply and Fixing (minimum) 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application over entire roof area with over lapping 100mm to either sides and sealed in after cleaning down the roof by brooms Complete all as specified and as directed. |
| 34 | Material and Labour for 40mm thick brick tiles, laid on and including 15 mm thick cement mortar 1:6 and joints grouted and pointed flush in cement mortar 1:3 mixed with 5% crude oil by weight of cement ; Complete all as specified and as directed. |
| 35 | All as per Srl Item No. 34.00 here-in-before but except brick tiles complete all as specified and as directed.Note :- old dismantled serviceable tiles obtained from Srl item No 29.00 shall be reused after necessary cleaning of mortar |
| 36 | Dismantling wall and ceiling board (fibre, pulp, insulation etc), or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and as directed. |
| 37 | Supply & fixing Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to at 457 mm centre including GI Hanger 6mm dia (Upto 1200mm length) adjusting level fixed to roof slab by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed. |
| 38 | Material & labour Seamless calcium silicate ceiling 12mm thick made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) including material and labour for preparation of ceiling surfaces and applying 02 coats of OBD complete all as specified and as directed. |
| 39 | Supply and fixing 5mm thick hollow PVC wall lining consisting of designer/ plain colour PVC sheet inclusive of solvent cement, PVC frame and all necessary items for fixing at site, complete all as specified and as directed. |
| 40 | Material and labour for repairing of RCC projections, chajjas, roofs, facia etc. by necessary preparations i.e. scrapping, cutting, chiseling, dusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete 1:1.5:3 using 12.5mm graded crushed stone aggregate and reinforced with 10mm TMT bars with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches area n.exc 5 Sqm each and thickness of RCC member exc 50mm including and applying two coat of cement base paint over a coat of alkal resistant primer in upto 9m height complete all as specified and directed by Engineer-in-charge. Note : Cost of formwork and welded mesh, bldg height upto 9m, shall be deemed to be included in unit rate quoted by the Contractor |
| 41 | S&F factory made single extructed WPC but frame size 65x 125 mm (wood polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum,screw withdrawel strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2,modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed. |
| 42 | S&F factory made single extructed WPC (wood polymer Composite) solid Plain flush door shutters of 35 mm thick comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minumum dencity of 650 kg/ cum and screw withdrawa strenth of 1800 N (Face )&900 N (Edge), minimum compressive strength of 50 N/mm2,modules of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/moisture proof and fire retardant and fixed with steelness steel butt hinges of requred size with necessary full body threank SS screw complete all as specified and as directed. (Stainless screw and butt hinges and necessary SS Screw shall be paid separately) |
| 43 | Taking down chowkat or frames with shutters (without taking off shutters from frames) not exc 1.5 Sqm each complete all as specified and as directed. |
| 44 | Taking down chowkat or frame with shutter (without taking off shutter from frames) exc 1.5 Sqm and n.exc 4 Sqm complete all as specified and as directed. |
| 45 | Supply & fixing pressed steel frames 1.25mm thick for door size of frame125 X 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats including PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces complete all as specified and directed. |
| 46 | S&F factory made ISI marked flush door shutters 35mm thick, BWP conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 2nd class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters and complete all as specified and as directed by the Engineer-in-Charge |
| 47 | Supply & fixing 2nd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed. |
| 48 | Supply & fixing 300mm long Aluminium alloy, Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed. |
| 49 | Supply & fixing Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed complete all as specified and directed. |
| 50 | Supply & fixing 150mm long Aluminium handles, cast type anodised complete all as specified and directed. |
| 51 | Supply & fixing stainless steel butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and directed. |
| 52 | M&L for preparation of new wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint, first quality, over a coat of pink primer on wooden surface complete all as specified and as directed. |
| 53 | M&L for preparation of new surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 54 | M&L for preparation of new surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 26, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 daysSep 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender