Tender For Providing Of 4 X Jcos Married Accomodation At Solan Mil Station Under Ge Kasauli.
Tender Value
1.38 Crore
Estimated cost
Bid Submission
10 Oct 2026
8 days left
EMD
2.13 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of 4 X Jcos Married Accomodation At Solan Mil Station Under Ge Kasauli.
BOQ
| Sl. No. | Item Description |
| 1 | Lump Sum price worked out by the contractor for \\"BUILDING WORKS\\" as listed in Schedule 'A' Part-I |
| 2 | Lump Sum price worked out by the contractor for \\"INTERNAL ELECTRIC SUPPLY WORKS\\" as listed in Schedule 'A' Part-II |
| 3 | Lump Sum price worked out by the contractor for \\"INTERNAL WATER SUPPLY WORKS\\" as listed in Schedule 'A' Part-III |
| 4 | Lump Sum price worked out by the contractor for \\"SEWAGE DISPOSAL WORKS\\" as listed in Schedule 'A' Part-IV |
| 5 | Lump Sum price worked out by the contractor for \\"AREA DRAINAGE WORKS\\" as listed in Schedule 'A' Part-V |
| 6 | Lump Sum price worked out by the contractor for \\"ROAD/ PATH/ HARD STANDING WORKS\\" as listed in Schedule 'A' Part-VI |
| 7 | Lump Sum price worked out by the contractor for \\"EXTERNAL ELECTRIC SUPPLY WORKS\\" as listed in Schedule 'A' Part-VII |
| 8 | Lump Sum price worked out by the contractor for \\"EXTERNAL WATER SUPPLY WORKS\\" as listed in Schedule 'A' Part-VIII |
| 9 | Lump Sum price worked out by the contractor for \\"PROTECTIVE WORKS\\" as listed in Schedule 'A' Part-IX |
| 10 | Lump Sum price worked out by the contractor for \\"RAILING/ FENCING WORKS\\" as listed in Schedule 'A' Part-X |
| 11 | Lump Sum price worked out by the contractor for \\"SITE CLEARANCE, DEVELOPMENT AND EARTH WORKS (FOR PART-II TO PART-X)\\" as listed in Schedule 'A' Part-XI |
| 12 | Lump Sum price worked out by the contractor for \\"DEMOLITION AND DISMANTLING WORKS\\" as listed in Schedule 'A' Part-XII |
| 13 | Schedule 'A' Part- XIV (Misc Items) Note : This schedule is not pre-priced rate indicated as \\"Rs 0.00\\" under Col. 5 siginifies this fact only. |
| 14 | Misc items for Internal Electric Supply Works |
| 15 | Material and labour for point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable conforming to IS-694 of size 1.5 Sqmm, 1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm, 1100 volts grade for earth continuity conductor to common earth and connected to earth dolly drawn in and including new concealed rigid PVC non metallic conduit terminated on and including new modular GI metal sunken box of thickness not less than 1.2 mm and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface flush with wall including cutting chases (using electric driven cutter) in any type of wall complete, comprising of One light/ bell/ buzzer point controlled by one switch or one fan point controlled by one switch & fan regulator, complete all as specified and as directed by Engineer-in-Charge.Note: Cost of cutting chases and making good shall deemed to be included in the unit rate quoted against the item. |
| 16 | All as per Serial item No. 13.00 here-in-before but for One light point controlled by two, 2-way switches. |
| 17 | All as per Serial item No. 13.00 here-in-before but for one socket outlet 3/ 5 pin, 5 Amps on independent board complete all as specified and as directed by Engineer-in-Charge. |
| 18 | All as per Serial item No. 13.00 here-in-before but for socket outlet 3 pin 5 Amps on same board complete all as specified and as directed by Engineer-in-Charge. |
| 19 | All as per Serial item No. 13.00 here-in-before but for one socket outlet 3/5 pin, 15/ 16 Amps on independent board, size of cable 2.5 sqmm for phase, neutral & 2.5 sqmm as earth wire complete all as specified and as directed by Engineer-in-Charge. |
| 20 | S&F Inverter type LED tube light batten 4 feet, 1 x 18/20 watt, 230 volts inbuilt Lithium ion battery with charging time 8 to 10 Hours and back up time minimum 4 Hours complete including fitting fixed on wall/ ceiling and connecting up complete with flexible cable white of suitable size and making necessary connection complete all as specified and directed by Engineer-in-charge. |
| 21 | S&F LED street light fitting, 35 watt LED, 230 volts, outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/ 66 protection with and including light mounting bracket made out of 25 mm bore GI pipe light grade 1.0 metre long, bent in shape as per requirement for fitting including two pair of MS plate iron clamp of size 32mm x 5 mm thickness with nuts, bolts and washers suitable for fixing in outer wall of building including painting of mild steel flat iron surface, two coats of synthetic enamel paint over a red oxide primer complete all as specified and as directed by Engineer-in-charge. |
| 22 | Supply and fixing Exhaust fan, steel body, AC single Phase, 230V of size 300 mm sweep, 900 RPM, with blades, frame and louvers, shutters etc., mounted on walls with nuts, bolts, washers including cutting hole for air ducting for exhaust fan in Circle/ square shape or as per site requirement into or through brick/ concrete walls built in cement mortar of area suitable for exhaust fan including making good of disturbed area in cement mortar 1:3 or cement concrete 1:2:4, type B-l complete all as specified and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 23 | Supply and fixing Exhaust fan, steel body, AC single Phase, 230V of size 300 mm sweep, 900 RPM, with blades, frame and louvers, shutters etc., mounted on walls with nuts, bolts, washers including cutting hole for air ducting for exhaust fan in Circle/ square shape or as per site requirement into or through brick/ concrete walls built in cement mortar of area suitable for exhaust fan including making good of disturbed area in cement mortar 1:3 or cement concrete 1:2:4, type B-l complete all as specified and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender