Tender For Providing Of Standby Pump At Garuda Mess Existing Sump Under Ge (U) W/S Delhi Cantt-10
Tender Value
2 Lakhs
Estimated cost
Bid Submission
26 Sep 2026
15 days left
EMD
4000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Standby Pump At Garuda Mess Existing Sump Under Ge (U) W/S Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exc. 1.5 m wide and not exceeding 1.5 mtr deep for pipe line in any kind of soil getting out and levelling of bottom surface to required level complete all as specified and directed. |
| 2 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cm thick all as specified and directed by Eng. In Charge. |
| 3 | Removal of excavated material from site to a distance not exceeding 50 meters away and depositing where directed at a level not exceeding 1.5 meters above the starting point as directed by Engr-in-Charge. |
| 4 | S&F 50 mm bore GI water tubing medium grade ISI marked with all fittings and accessories laid in trenches/wall/grounds/floors required for competion of work complete all as specified and directed. |
| 5 | S&F 40 mm bore GI water tubing medium grade ISI marked with all fittings and accessories laid in trenches/wall/grounds/floors required for competion of work complete all as specified and directed. |
| 6 | Supply and fixing Gun metal gate valve/glove valve ISI marked with iron wheel head screwed both end for GI tubing of size 50mm dia. |
| 7 | Supply and fixing Gun metal gate valve/glove valve ISI marked with iron wheel head screwed both end for GI tubing of size 40mm dia. |
| 8 | Supply and fixing Monoblock submersible pump 15 LPM, 8-20 mtr head, 5 hp, 1 phase, 240 voltage 50hz complete all as spcefied and directed. |
| 9 | Supply and fixing, laying & testing of cable XLPE isulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with standared aluminum conductor of size 50sqmm 4core complete all as specified and directed. |
| 10 | Supply and fixing of light grade galvanised mild steel pipe 50 mm bore complete with all fittings, laid under roads, drain, paths, fixed to poles/walls with suitable mild steel clamps, bolts, nuts and washers complete all as spcefied and directed as for cable protection.(Note:- Excavation & earth work shall be measured and paid for separately under appropriate item of this schedule.) |
| 11 | M&L local sand dry, filling in trenches around under ground cable copmplete all as specified and directed. |
| 12 | M&L for providing of new sub class 'B' bricks, old sie, well burnt laid flat dry for protection of under ground cable copmplete all as specified and directed. |
| 13 | M&L cement concrete type B2 (1:2:4) 40mm graded aggregade in foundations, filling and mass concret |
| 14 | M&L for Earthing complete with GI earth plate electrode 60cm x 60cm x6.0 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.6 mtr below normal ground level surrounded from all sides by 15 cm thick and packed layer of charcol dust and salt and common salt fitting in alternator layers and elsc connection by using GI strip 25 x 4 mm by means of bolts, nuts, check nuts & washers of galvanised iron and protected by light grade 40mm dia GI pipe connected to main switch board of main control board and GI pipe light grade 20mm dia for watering and including funnel, wire mesh, PCC pit cover and PCC chamber pit with PCC 1:2:4 (type C-2) including excavation and earth work, disposal of surplus soil to a distance not exc 50mtr all as specified and shown in electrical plate No -3 of SSR part-I. |
| 15 | Supply and fixing, install, test and commissioning of Feeder pillar box indoor type cubical shape, three phase, 4 wire. AI bus bar for phase and neutral made out of CRCA sheet 2.0 mm thick, factory fabricated, CPRI approved, powdered coated, dust and vermin proof, provn for ventilation, angle iron frame and four legs of 40x40x5mm thick angle iron, 1.5 ft long grouted on PCC foundation of height not less than 30cm from ground level, grouting properly and of suitable size to accomodate the itms mentioned below and having separate compartment of following including necessary cable connections to the MCCBs, voltmeter, Ammeter and cable lugs etc.(a) AI bus bar with PVC sleev suitable for 200 Amps for phase & 200 Amp for neutral - 01 set(b) Voltmeter, digital type 0-500 volt with selector switch - 01 set (c) Ammeter Digital type 0-100 Amps with selector switch and CT - 1set (d) Phase indicating lamps LED type (red, yellow, bl;ue) 01 set(e) Incoming MCCB 63 Amp 3 Pole 18 KA with adjustable thermal and fixed magnetic release - 01 No(f) Outgoing MCB 40AMP 2 pole - 03 Nos(g) Pump starter suitable for 5hp, 1 phase, 240 voltage 50hz complete - 02 Nos Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender