Tender For Provn Of Aluminium Partition System With Doors And Protective Chajja Over Openings In Bldg No P-252 Under Ge (West) Mathura
Tender Value
24.22 Lakhs
Estimated cost
Bid Submission
26 Sep 2026
17 days left
EMD
48454
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mathura → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Aluminium Partition System With Doors And Protective Chajja Over Openings In Bldg No P-252 Under Ge (West) Mathura
BOQ
| Sl. No. | Item Description |
| 1 | Cutting holes in brick walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required in depth of embedded portion exceeding half brick but not exceeding one brick complete all as specified and directed. |
| 2 | M&L for cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5 metre clear span, cills, steps, siesmic and other similar bands, plinth courses, string courses, lacing courses, coping, parapets and railing upto 60cm height, copings bed block,roof kerbs or mud stops, kerb stone, kneelers, apex stones, bed plates, surface channels and drains, benching, water troughs and the like including weathering, slightly rounded or chamfered angles and throatings etc.including necessary form work complete all as specified and directed by Engineer-in-Charge. |
| 3 | S&F steel work in tubular trusses including columns, special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS.1161-1998 grade St-240 complete all as specified and directed. |
| 4 | S&F Plates (plain or chequered) channels, square cut or notched(ordinary and counter sunk) forming holes, without any attachment Fe-290 (Gde E-165) all as specified and as directed. |
| 5 | S&F MS fastners (machine made) with hexagonal or square head at one end and screwed the other or serewed both ends, each screwed end fitted with washer and one hexagonal or square nut exc 10 cm long but not exceeding 15 cm long complete all as specified and directed by Engineer-in-Charge. |
| 6 | M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge. |
| 7 | S&F 1mm thick pre painted plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete al as specified and directed. |
| 8 | Providing and fixing factory made uPVC white colour casement / sliding window / door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware, EPDM gasket, 1.2+ 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, all complete and as directed, (Glazing, hardware hinges and fitting, EPDM rubber gasket etc. to be paid separately.) Frame (60mm x 58mm) with wall thickness 2.3mm (+/- 2mm) complete all as specified and directed.Note:-Each member of window to be measured separately wrth clear length. |
| 9 | S&F 4mm thick sheet glass, ordianary quality glazing with beads and fixed with metal panels pins in square exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge. |
| 10 | S&F 4mm thick froasted glass, ordianary quality glazing with beads and fixed with metal panels pins in square exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge. |
| 11 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Cont/- |
| 12 | Cont/-Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick frosted glazing with selected quality glass. (Note: The unit rate quoted by contractor includes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 13 | Providing and fixing factory made UPVC white colour sliding window three track made of extruded profile with wall thickness of 2.3mm(+/- 0.2mm). Window profile with hollow section with multi chamber, frame (88mm x 52mm), sliding sash (42mm x 67mm), sliding mesh sash (42mm x 57mm) sliding interlock (one vertical leength in each shutters)(45.5mm x 28mm), Glazing bead (24.5mm x 16mm) wil be mitered cut and fusion welded at all corners, inluding drilling of holes for fixing hardware and drainage of water etc, making arrangement for fiixing hardware. EPDM gasket, 1.2 +/- 0.2mm thick galvanised steel frame (30mm x 18mm) 2Nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100 long fasteners.Cont/- |
| 14 | Cont/-Hardware: (Touch lock of zinc alloyed (white powder coated), steel roller system, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and required acecessories.)(Note: The unit rate quaoted by contractor includes cost of 5.00 mm thick sheet glass, ordinary quality and all other connected accessories. Net openeing will be measured for payment purpose.) (A) Area exc 2.00 Sqm each |
| 15 | S&F bevelled edge mirror 5.5mm to 6mm thick selected quality glass, firmly mounted on 6mm thick commercial ply wood backing and fixed to wooden plug with chromium plated brass screw and cup washer complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender