Tender For Execution Of Work Under Mw (Upha) Reconstruction Of Collapsed Boundary Wall And Repairing Of Pathway At Old English Tombs, Surat.
Tender Value
42.24 Lakhs
Estimated cost
Bid Submission
26 Sep 2026
11 days left
EMD
1.05 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Surat → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Execution Of Work Under Mw (Upha) Reconstruction Of Collapsed Boundary Wall And Repairing Of Pathway At Old English Tombs, Surat.
BOQ
| Sl. No. | Item Description |
| 1 | Execution of work under following items |
| 2 | Towards demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge In cement mortar (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 3 | Towards demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in -charge. (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 4 | Towards Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 5 | Towards filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 meters with all lift. (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 6 | Towards supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 7 | Towards providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 8 | Towards the steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 9 | Towards the P/L Design mix concreate derived from natural sources All works upto plinth level. Concrete of M25 grade with minimum cement content of 330 kg /cum. (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 10 | Towards centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts. (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 11 | Towards the brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:4 (1 cement: 4 coarse sand). (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 12 | Towards the steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 13 | Towards painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacturer over grills and gate. (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 14 | Towards disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 15 | Towards supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.150 mm nominal size dia. (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 16 | Towards CEMENT PLASTER (IN COARSE SAND) 12 mm cement plaster : 1:4 (1 cement : 4 coarse sand) \\" over walls etc. (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 17 | Towards finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete. On walls and pillars etc. (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 18 | Towards supplying and fixing adequate size of heavy-duty HDPE pipe outer dia 63mm, having working pressure 4Kg/ Sq.cm. at a depth of 75 Centimetre below the ground including excavation &, refilling the trench etc, of following sizes complete as required. (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 19 | Towards supplying & laying of one number PVC insulated and PVC sheathed 4 Core 16 SQMM Armed power copper cable in existing DWC Pipe etc. as required. (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 20 | Towards supplying & laying of one number PVC insulated and PVC sheathed 3.5 Core 50 SQMM Armand power copper cable in existing DWC Pipe etc. as required. (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 21 | Towards supply, Installation, Testing and Commissioning of both side openable double door(back & front) Outdoor Type Feeder Pillar suitable for 415V, 3 Phase, 4 Wire 50 Hz AC supply system having suitable fabricated with CRCA sheet steel of 1.6 mm thick and 2 mm thick for slanted roof & gland plates with 400 mm long Leg & base frame made of 40X40X06 mm MS Angle i/c Powder Coated Paint in approved shade , Aluminium Alloy bus bars of 160A Capacity, connections, interconnections with adequate size aluminium bars, cables, connectors etc. along with necessary nuts & bolts, clamps, DMC/ SMC bus bar supports, with necessary M.S. channel, MS Flat, door handle, godown lock, padlock, both side louvers, Aluminium Danger Plate on brick mortar foundation, with PCC Base casting i/c excavation, entire feeder pillar shall have a common GI earth bar, cable gland plates , i/c following accessories. (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 22 | Towards providing and fixing 100 Amp, 25kA Four Pole MCCB in factory make enclosure for terminating Electricity Board Service Connection after Energy Meter, i/c making connections, testing commissioning complete etc. as required. (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 23 | Towards supply, installation, testing and commissioning of suitable wattage Flood light fixtures complete with energy efficient LEDs. IP 65 / IP 66 housing, driver, all other accessories etc. duly wired complete for use on 240 V single phase 50 Hz AC i/c fixing on MS Channel of suitable size & Length on existing street light Pole, connection etc. complete as per specifications as required (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 24 | Towards supply & Installation testing & Commissioning of 10 M mini mast suitable for withstanding 35 ms wind speed, with ladder arrangement, in built junction box, head frame, luminaries’ carriage suitable to install 06 Nos. luminaries in symmetrical arrangement, junction box, lightning finial, i/c foundation (RCC) of High Mast should be as per manufacturer's recommendation as reqd. [EACH] (Including all the materials & labour charges etc. complete as direction by site in charge) |
| 25 | Towards supplying and applying bituminous solution primer on roof and / or wall surface at 0.24 litre per sqm. (Including all the materials & labour charges etc. complete as direction by site in charge) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender