Tender For Provision Of Storage Of Ops Equipment & Equipment Working Area At Nrs Thane Under Ge (Nw) Mankhurd.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
26 Sep 2026
12 days left
EMD
87540
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Storage Of Ops Equipment & Equipment Working Area At Nrs Thane Under Ge (Nw) Mankhurd.
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out any type of soil. |
| 2 | Demolition of Reinforced cement Concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition |
| 3 | Removing excavated material/ debries / soil exc. 250 m but n exc. 500m and depositing where directed at a level not exceeding 1.50m above the starting point. |
| 4 | Excavating in trenches, by mechanical means(hydraulic excavator) n exc 1.5 m wide and n exc 1.5 m in depth; for footing, Plinth Beam & Dwarf Wall, etc. n exc 10 sq m on plan and getting out in Hard/dense soil. |
| 5 | M&L Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface |
| 6 | M&L Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) |
| 7 | M & L Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall |
| 8 | M&L Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area |
| 9 | M&L Cement concrete in foundations, filling and mass concrete 1:4:8 using 40 mm graded aggregate |
| 10 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in Hard/dense soil. |
| 11 | Removing excavated material in any type of Soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point |
| 12 | M&L RCC- M-30 (Design Mix) using 20mm graded aggregate for Footing and plinth beams |
| 13 | M & L RCC- M30 (Design Mix) using 20mm graded aggregate for Column complete all as specified and directed |
| 14 | M & L RCC- M30 (Design Mix) using 20mm graded aggregate for beams and lintels Chajja complete all as specified and directed |
| 15 | M & L RCC- M30 (Design Mix) using 20mm graded aggregate for RCC Slab and roof beams |
| 16 | M&L for TMT bars 10mm dia & over of Grade Fe 500 incl cutting, bending, binding & placing in position with binding wirefor footings Slab beams roof slab etc complete al as specified and directed |
| 17 | Ditto but 5 to 10mm dia in stirrups, spacers & binders. |
| 18 | M&L Form work for rough finished surfaces of concrete measured flat for Footing and PB |
| 19 | M & L Form work for rough finished surfaces of concrete measured flat for Coloumn, |
| 20 | M&L use & waste Form work for rough finished surfaces of concrete measured flat for RCC beams sides, soffits and Chajja |
| 21 | M&L use & waste Form work for rough finished surfaces of concrete measured flat for RCC Slab and beams |
| 22 | M&L Pre-cast cement concrete block masonry with solid blocks Type C1 1:3:6, exc. 10 cm in width and setting in Cement mortar (1:6) mortar, complete. |
| 23 | M&L for Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls type-C1 1:3:6 (20mm stone aggragate) and setting in CM 1:4. |
| 24 | S&F second class hard wood , plain ,soild ,straight chowkats and frames, wrought , rebated on soild rounded or chamfered , put together with gule pinned at joints etc complete all as specified .and directed |
| 25 | S&F 30mm Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides |
| 26 | Add to items no 22 above for both face is covered with deco rative face veneer with lipping/frame to match |
| 27 | S&F 35mm thick glazed and skeleton shutters, in 2nd class hardwood, open rebated and prepared to receive glass, gauze etc, (without sash bar )edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a) Complete al as specified and directed |
| 28 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with Square tube, supply and fixing in opening as per specification given under SSR Part II 2020 including making good the disturbed surface all as specified and directed. |
| 29 | M&L for factory made solid PVC panel type PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rails, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent supplying and fixing in the frame at site as per specifications and drawing given under SSR Part II 2010 complete all as specified and directed. |
| 30 | S&F hinges (125 mm) stainless steel medium weight complete all as specified |
| 31 | S&F extruded aluminum alloy handles (150mm ) fabricated type anodised complete all as specified Make :- Shalimar / jyoti/ Classic/ Ashoka |
| 32 | S&F aluminum anodised barrel tower bolts (200mm ) of extruded section complete all as specified |
| 33 | S&F 300 mm Aluminium alloy , anodised , sliding door bolt with hasp, staple (bolt type ) and fixing clips of sheet , cast , exctruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified |
| 34 | S&F floor door stopper aluminium body over length of cover plate 140 mm and tonque anodised with hard drawn steel spring fixed in floor complete all as specified and directed. Please Enable Macros to View BoQ information |
| 35 | S&F floor door stopper aluminium body over length of cover plate 140 mm and tonque anodised with hard drawn steel spring fixed in floor complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender