Tender For Provision Of Certain E/M Services At Acy Armoury, Provision Of Iron Staircase In Certain Smqs, Renovation/Upgradation Of Badminton Court At Officers Mess And Addn/Altn To Toilet Of Navkiran Cinema Hall At Afa.
Tender Value
23.72 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
3 days left
EMD
47444
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medchal Malkajgiri → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Certain E/M Services At Acy Armoury, Provision Of Iron Staircase In Certain Smqs, Renovation/Upgradation Of Badminton Court At Officers Mess And Addn/Altn To Toilet Of Navkiran Cinema Hall At Afa.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 12-Sep-2026 | CORRIGENDUM NO 01 | BOQ | 24-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Brickwork or stone / boulder / PCC block masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stone-work and precast concrete articles etc complete all as specified and as directed. |
| 2 | Taking down cement plaster in wall/ceilling surfaces on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 3 | M&L for pre-cast cement concrete block masonry of type C1 1:3:6 (using 20mm graded stone aggregate) with solid blocks exc 10cm in width and setting in cement mortar 1:4 etc complete all as specified and as directed. |
| 4 | M&L for plastering in internal wall surfaces of 10 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed. |
| 5 | M&L for rendering 10 mm thick in CM 1:3 on concrete surfaces as ceilling finished even and smooth (without using extra cement) complete all as specified and directed. |
| 6 | M & L for two coats of oil bound distemper on newly plastered surface of walls applying 3 mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to wall and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed. |
| 7 | M & L for two coats of oil bound distemper on newly plastered surface of ceiling applying 3 mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to ceiling and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed. |
| 8 | M&L for complete removal of existing treatment of any description and applying 3 mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to wall and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed. |
| 9 | M&L for complete removal of existing treatment of any description and applying 3 mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to ceiling and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed. |
| 10 | Demolition of cement concrete (unreinforced) of any description and in ground floors and pavings n exc 15 cm thickness (below or above ground level) any position and disposed off to a distance exc. 50 mtrs and not exc. 250 mtrs all as directed |
| 11 | M&Lfor laying PCC (1:2:4) type B-2 using 40 mm graded aggregate in floors/sub base of 75 mm average thick for etc finished fair and even etc complete all as specified and directed. |
| 12 | Dismantling floor, heath or wall tiling including cement sand mortar bedding and removing rubbish of the premises complete all as specified and directed. |
| 13 | M&L for Screed bed or bedding layer of cement mortar (1:4) 15mm thick for laying floor tiles/floor finishes. |
| 14 | M & L for Joint free non - skid coloured ceramic tiles, 10 mm thick (square or rectangular) area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. |
| 15 | M&L for rendering 10mm thick in cement mortar 1: 3 on brick or concrete surfaces to receive as backing of wall tiling etc complete all as specified and as directed. |
| 16 | M&L Joint free Glazed coloured ceramic tiles of digital quality in vertical surface size of each tile exceeding 0.54 sqm but not exceeding 1.00 Sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 17 | Taking down Chowkhats or frames with shutters (wihout taking off shutters) from the frame exc 1.5 sq. m but n exc 4 sq. m complete all as specified and as directed |
| 18 | Taking down Chowkhats or frames with shutters (wihout taking off shutters) from the frame n.exc 1.5 sq. m complete all as specified and as directed |
| 19 | M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like over 20 mm thick screed bed or bedding layer in cement mortar (1:6), including pointingin white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 20 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. |
| 21 | M&L for pre-cast reinforced cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate), set in cement mortar 1:4 as in kitchen flat form and shelves in kitchen slabs, landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, with plain faces etc complete all as specified and directed. |
| 22 | M&L for MS TMT bars 10 mm dia and over cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed. |
| 23 | Taking up or down 15mm bore of pipe PVC/steel tubing and connections, including for refixing or removal and disconnection of fiittings etc complete all as specified and directed. |
| 24 | Taking up or down 20mm bore of pipe PVC/steel tubing and connections, including for refixing or removal and disconnection of fittings etc complete all as specified and directed. |
| 25 | Supplying and laying of 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. |
| 26 | Supplying and laying of 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. |
| 27 | S & F in repairs Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brassscrews, pointing around urinalback in cement; fixing aetc Make cera Cat. No. S4020112 or equivalent all complete and as directed. |
| 28 | S & F in repairs Urinal spreader of cp for fixing with 15 mm dia pipe etc Make cera Cat. No. F8070201 or equivalent all complete and as directed. |
| 29 | S&F in repairs Curved Urinal partitions 10 mm thick of size 900 x 450 mm of meke Cera Cat. No. S4090105 along with its necessary connected accesories etc all complete and as directed by Engineer-in-Charge. |
| 30 | S&F in repairs of Vitreous China Pedestal type EWC with attached flushing cistern, white including connection to drain and to flushing pipe, and plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device etc complete of Make : Cera (Chevron) Cat. No. S1013225 or equivalent (without Knob) etc all complete and as specified. |
| 31 | S&F in repairs Health faucet ABS body with 1 meter SS braided connection pipe of make : Cera Cat. No. F8030109AB or equivalent all complete and as specified. |
| 32 | S&F in repairs Toilet paper holder with flap guard of make : Cera (Hera range) Cat. No. F5007110 or equivalent all complete and as directed. |
| 33 | S&F in repairs Grating doom of 100 mm dia of Stainless steel hinged or openable type ,fixed with suitable solvent cement complete as specified. |
| 34 | S&F in repairs 2-Way bib cock with side handle, wall flange and aerator of make: Cera (winslet) Cat. No. F1099161 or equivalent complete all as specified and directed. |
| 35 | S&F in repairs table top Wash Hand Basin of size 750 x 380 x 130 mm of snow white colour of make : Cera (Catmega) Cat. No. S2020160 or equivalent complete all as specified and directed. |
| 36 | S&F in repairs 32 mm waste coupling with ceramic pop-up push type (full threaded) of make: Cera Cat. No. F8050351 or equivalent all complete and as specified. |
| 37 | S&F in repairs of PVC connection 15mm size with brass CP nuts of length 600 mm complete all as specified and directed by Engr -in- charge. |
| 38 | S&F in repairs bottle trap of size 300 mm of make : Cera Cat. No. F8060406 or equivalent complete all as specified and directed. |
| 39 | S&F in repairs angle cock with wall flange of Make : Cera (winslet) Cat. No. F1099201 or equivalent all complete and as specified. |
| 40 | S&F in repairs soap dish of make : Cera ( Hera range) Cat. No. F5007106 or equivalent all complete and as specified. |
| 41 | S&F in repairs Liquid soap dispenser of make : Cera (Hera range) Cat. No. F5007111 or equivalent complete all as specified. |
| 42 | S&F in repairs Towel ring of make : Cera (Hera range) Cat. No. F5007105 or equivalent complete all as specified. |
| 43 | S&F in repairs Towel rail 600 mm long of make : Cera (Hera range) Cat. No. F5007103 or equivalent complete all as specified. |
| 44 | M&L for corner glass shelf size 225mm x225m of Make : Cera (Oceana range) Cat. No. F5005102 or equivalent complete all as specified and directed. |
| 45 | S&F in repairs glass shelf of Make : Cera Cat. No. F5001114 or equivalent complete all as specified and directed. |
| 46 | S&F in repairs 5 mm thick glass mirror of size 800 x 600 mm with double coat for protection and longevity, 5 mm clear glass shelf with stainless steel rail and silver plating on the back for better reflection of Make : Cera Cat. No. B3510149 or equivalent complete all as specified and as directed. |
| 47 | S&F in repairs of Pillar taps 15 mm dia, cast copper alloy, Pillar cock with 310 mm (12”) long extended body and aerator, chromium plated fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and capston head, screwed for iron pipe of 15 mm bore of make : Cera Cat. No. F1023102 or equivalent all complete and as specified. |
| 48 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed by Engr -in- charge. |
| 49 | S&F PVC (SWR) pipes 110 mm bore single socketted in any length with rubber ring joints laid in trenches or floors etc complete all as specified and as directed |
| 50 | S&F PVC (SWR) pipes 75 mm bore single socketted in any length with rubber ring joints laid in trenches or floors or in walls, etc complete all as specified and as directed |
| 51 | S&F PVC (SWR) bends any radius suitable for 110mm bore pipecomplete all as specified and directed |
| 52 | S&F PVC (SWR) bends with oval access doors any radius suitable for 110mm bore pipe, etc complete all as specified and as directed |
| 53 | S&F PVC (SWR) branch piece, 110mm,single (single Y or T) equal or unequal etc complete all as specified and as directed. |
| 54 | S&F PVC (SWR) bends any radius suitable for 75mm bore pipe, etc complete all as specified and as directed |
| 55 | S&F PVC (SWR) bends with oval access doors any radius suitable for 75mm bore pipe, etc complete all as specified and as directed |
| 56 | S&F 75mm dia PVC (SWR) floor/nahani trap plain with grating including jointing with solvent cement and jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc complete all as specified and as directed. |
| 57 | Supply and fix Salt glazed stoneware gully trap, type Q 125x100mmmm, complete all as specified and as directed. |
| 58 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P.brass/ stainless steel screws, all complete as per architectural drawings all as specified and directed. |
| 59 | S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for type of shutters(hung/sliding) of doors, windows, ventilators, including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections / appropriate Z sections and other sections of aproved make conforming to IS- 733 and IS- 1285, with dash fasteners of required dia and size, including neccessary filling up the gaps at junctions, i.e. at top, bottom ad sides with required EPDM rubber / neoprene gasket etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, CP brass / stainless steel screws, all complete as per architctural drawigs and the directions of Engineer-in-charge. |
| 60 | S&F Powder coated (Thickness not less than 50micron) Aluminium anodised Grill, aperture n exc 75 mm ,size 6mm x 4mm thick, including 1 mm thick channel fixed with steel screws complete all as specified and directed. |
| 61 | Providing and fixing of 100% Solid WPC ( Wood polymer Composite ) frames single pattam (size (65x100mm) comprising of virgin PVC resin, Calcium Carbonate and natural Fibres (Wood Powders/ rice husk/ wheat husk ) and Non-toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner ). Water/ Moisture Proof, Fire Retardant. As per direction of Engineer -In-Charge. |
| 62 | M & L 30 mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin, Calcium Carbonate and natural Fibres (Wood Powders/ rice husk/ wheat husk ) and Non-toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner ). Water/ Moisture Proof, Fire Retardant. all as specified and directed. |
| 63 | S&F 250 mm long Brass, sliding door bolt withsand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed all as specified. |
| 64 | S&F for Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed 200 mm of extruded section and fixed. |
| 65 | S&F 150 mm size Brass handles, cast type,polished bright all as specified. |
| 66 | S&F of Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 of 100 mm long. |
| 67 | M & L for MS flat for hold fast. Conforming to Fe-290 Gde E-165 |
| 68 | S&F 150 mm long floordoor stopper of brass body and tongue with hard drawn steel spring all as specified |
| 69 | S & F frosted glass of 5.50mm thick selected quality in square and not exceding 0.5 Sqm in each pane. |
| 70 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified. |
| 71 | M & L 18 mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin, Calcium Carbonate and natural Fibres (Wood Powders/ rice husk/ wheat husk ) and Non-toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner ). Water/ Moisture Proof, Fire Retardant. As per direction of Engineer -In-Charge. |
| 72 | S/F of 100mm Brass handles, cast type, polished bright fixed with nut , screw and washer of mild steel , bright finished |
| 73 | S&F of Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 of 75 mm long. |
| 74 | S&F standard quality magnetic catcher for cupboard shutters. |
| 75 | S&F of High density polyethylene pipes (HDPE) 40mm dia of pressure rating 6kg/cm2 fixed complete to walls or laid in floors complete all as specified and directed by Engr -in- charge. |
| 76 | Dismantling existing barbed wire/plain wire/ chain link fencing any type from RCC/Steel/Wdn posts complete etc all as specified and as directed. |
| 77 | M&L for PCC 1:4:8 type D2, using 40mm graded stone aggregate as in foundations, filling and mass concrete all as specified and directed |
| 78 | M&L for laying 40 mm thick PCC (1:2:4) type B 0 (using 12.5mm graded aggregate) as in floors complete all as specified and as directed. |
| 79 | M&L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed by Engineer in charge |
| 80 | S&F mild steel works in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling ,bolting or riveting etc and similar works conforming to Fe-290 (Gde-E-165) all as specified and directed |
| 81 | Supply only chain link mesh of size 50x50x4mm and made of galvanized wire and shall confirm to IS 2712-2003 and having zinc coating of type heavy as laid down in IS 4826 including line wires/binding wire etc fixed to any type of standards posts complete all as specified and as directed |
| 82 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolt, etc including provission of binding wire, complete all as specified and as directed |
| 83 | M&L for mild steel round bars 10 and over dia as required, made to shape for securing chain link fencing etc., and similar works conforming to Fe-290 Gde E-165 and including preparation and applying two coats of synthetic enamel paint over a coat of red oxide primer before fixing etc complete all as specified and as directed |
| 84 | S&F MS framed work as in doors or Gates of angle or other section with gusset plates, rails, braces, etc.,complete, drilled for fixing of steel sheeting or other covering. Doors,etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and fixing complete conforming to Fe-410-W (Gde-E-250) quality-B |
| 85 | Material and labour for preparation and applying two coats of synthetic enamel paint over a coat of red oxide primer on newly treated steel surfaces of any description, etc complete all as specified and as directed. |
| 86 | M&L for plastering in external wall surfaces of 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed by Engr -in- charge. |
| 87 | M&L for preparation of newly plastered surfaces of external walls and applying two coats cement base paint over a coat of cement primer complete all as specified and directed by the Engineer-in-Charge. |
| 88 | Excavation in post holes each n exc 0.5 Cum getting out returning filling in and ramming earth or broken rubble mixed with earth arounf in layers n.exc 50m and making good surface in hard/dense soil |
| 89 | M&L for PCC 1:3:6 type C2, using 40mm graded stone aggregate as in foundations, filling and mass concrete all as specified and directed |
| 90 | S & F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework ofwater tanks and similar work conforming to Fe.290.Gde-E-165 |
| 91 | S&F plates (plain or corrugated) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe-410(Gde-250) |
| 92 | S&F Mild screw bolts ( Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5 but n exc 30 cm long dia of shank 16 to 20mm. |
| 93 | S&F Mild screw bolts/anchor bolts ( Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 but n exc 10 cm long dia of shank 11 to 15mm. |
| 94 | Excavation in trenches in any kind of soil n.exc 1.5m wide and n.exc 1.5m in depth for laying of new LT UG Cables etc. complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 95 | Excavation in trenches in any kind of soil n.exc 1.5m wide and n.exc 1.5m in depth for laying of new LT UG Cables etc. complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 24, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender