Tender For High-Mast Light At Balaji Temple, Bagtesh Singh Nagar.
Tender Value
3.50 Lakhs
Estimated cost
Bid Submission
10 Sep 2026
3 days left
EMD
7000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For High-Mast Light At Balaji Temple, Bagtesh Singh Nagar.
BOQ
| Sl. No. | Item Description |
| 1 | Supply installation testing & Commissioning of high mast lighting system (as per PLG 07 of ILP UKtechinical report no 7 of ILE UK /IS:875 Part-1 – 2015//BSEN10025/and IS:2062 )consisting of totally hotdip galvanised by piecewise single dipped method high mast, lantern carriage suitable for up to 12 nosluminaries with welded arm (excluding luminares), mast head frame assembly with full cover, including 1No. LED 15 Watts aviation obstruction lights, double drum type self sustaining winch, integral power toolaccesible from door with padlocking arrangement (winch motor with control circuit) hot dippedgalvanised heavy duty pipe lightening finial, Stainless steel 6 mm dia. wire ropes (AISI 316, 7 / 19costruction 3 no. rope for lantern carrage & 2 no. rope for winch assembly ) foundation bolt, torquelimiter,EPR insulated PCP sheathed 5 core x 2.5 Sq.mm trailing cable, including outdoor type controlpanel for auto on / off, reverse / forward motor operation. The mast is constructed from mild steel plates(as per IS 5986 Gr. 510 ) cut and folded to form a polygonal section, telescopic jointed and welding as perBS 5135.etc. as required on Existing Foundation. ( See table P - 03 for specs.) OEM Must have Type testcertificate for wind tunnel test . All as per pre approved by Engineer in charge. All as per pre approved byEngineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\"attached with this BSR .12.5 Mtr HM (in 2 section) suitable for 6 No. Luminaries 2 no. rope for lantern carrage & 2 no. rope forwinch assembly |
| 2 | Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Armoured Coppercable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with electrolytic gradeCopper made of copper rods confirming to IS 613-1964, of purity >99.7 %, round/ flat strip armouring, Inner / outer sheath confirming to IS:5831 in existing RCC/ Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cabletie) including testing etc. as required of following size. OEM must have it's ownin house NABL accrediated Laboratory for testing procedure as per IS:10810 Foradditional technical parameters of product / work refer Annexure 'A' attachedwith this BSR6.0 Sq. mm 4 core |
| 3 | Providing & Fixing of IK08 IP65 protected Top/Bottom mounted LED Post top Luminarie made of singlepiece construction powder coated die cast alluminium housing with UV stabalized Clear / frostedPolycarbonate diffuser and Aluminium anodised with sand blast reflector. The System level Luminousefficacy ≥ 100 Lumen/W. SMD LEDs is to be used, System CRI>70, CCT: 3000/4000/6500 K. The integralelectronic driver must be potted & has a unique BIS R number must be potted & has a unique BIS Rnumber constant current and Internal/external surge protection device of min. 4KV(L-N) and efficiency >85%, PF>0.9, THD<10% and input Voltage range of 140-270V AC at 50Hz. System life of 50000 Burninghours with 70% of Initial Lumens maintained . Driver current <750mA. Fixture must be in compliancewith BIS Standards and Trade mark Certificate complete in all respect.OEM Must have its own in houseNABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liablewarranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer incharge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with thisBSR . |
| 4 | Add extra amount Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender