Tender For Proposed Renovation Of Carxetta Club In Ward Viii In Thejurisdiction Of Village Panchayat Velim
Tender Value
9.11 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
2 days left
EMD
18223
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Proposed Renovation Of Carxetta Club In Ward Viii In Thejurisdiction Of Village Panchayat Velim
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling asbestos sheet roofing including ridges, hips valley and gutters and stacking the material within 50 meters lead. |
| 2 | Demolishing cement concrete 1:3:6 or richer mix including disposal of material within 50 m lead. |
| 3 | Dismantling wood work of area below 40 sq.cm. wrought framed and fixed in frames, other frames and trusses including stacking of material within 50 mts. lead |
| 4 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) |
| 5 | Providing and fixing Colouron Plus galvulium roofing Sheets of 0.5mm thick double ribbed trapezoidal profile coated 1080mm with cover width of 1020mm including all the accessories (JSW or equivalent make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge. |
| 6 | Providing and fixing Prince or equivalent make PVC SWR half round eaves gutter with bolts, nuts and flat iron brackets 40 x 3 mm size complete. 180 mm nominal size |
| 7 | Removing dry or oil bound distemper by scrapping sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 8 | White washing with lime on old work ( two or more coats) to give an even shade. |
| 9 | Distempering two or more coats with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade. |
| 10 | Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete. |
| 11 | Painting one or more coats with superior quality ready mixed paint of steel work of approved brand & manufacture in all shades on old work to give an even shade |
| 12 | Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m |
| 13 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 14 | Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing all work into plinth level. |
| 15 | Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement. |
| 16 | Centering & shuttering including Strutting, Propping & removal of forms for : |
| 17 | xiii. Suspended floors, roofs landings, shelves & their supports |
| 18 | iv. Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams exceeding 1m in depth |
| 19 | Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) |
| 20 | In beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases upto floor five level |
| 21 | Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. |
| 22 | 12mm cement plaster 1:3 (1 cement : 3 fine sand) |
| 23 | 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge. |
| 24 | Providing and Fixing 30mm thick “RAJSHRI” BRAND FACTORY MADE INTERNAL PVC FLUSH DOOR SHUTTER - WOOD FREE consisting of frame made out of M.S. tubes of 19gauge thickness and size of 20mm x 40mm for stiles as well as top, bottom & lock rail . M. S. frame shall have a coat of metal primer of approved make & manufacturer. |
| 25 | Providing Pre-cast cement concrete jali 1:2:4 (1 cement: 2 coarse sand: 4 stone aggreate 6mm nominal size) reinforced with 1.6mm dia mild steel wire including centering and shuttering, roughening, cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine snad) all complete excluding plastering of the jambs, sills and soffits. i) 50mm thick |
| 26 | Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 27 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 28 | Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade. |
| 29 | Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete. |
| 30 | Providing and fixing Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps and dados, jointing with grey cement slurry @3.3 kg per sqm, including pointing/grouting in white cement mixed with pigment of matching shade complete. b) 600 x 600 mm - light Shades |
| 31 | Providing and fixing white vitereous china pedestal type (Europen type) water closet with seat as lid, whth C.I. brass hinges and rubber fitings 15 lts white vitreous china low level flushing cistern with fittings as brackets 40 mm white precelain 3enameled flush bad, 25 mm overflow pipe with specials and mosquito proof coupling of approved municipal design complete, including cutting and making good the walls and floors where required. a) W.C. pan with white plastic seat and lid |
| 32 | Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required. b)Flat back wash basin size 630x 450mm with a single 15 mm C.P. brass pillar taps. |
| 33 | Providing and fixing white vitreous china pedestal for was basin complete recessed at the back for the reception of pipes and fittings. |
| 34 | Providing and fixing 15 litres low level white vitreous china flushing cistern of approved make with fittings such as lead, valveless syphon etc. and C. P. brass handle complete. |
| 35 | Providing and fixing P.V.C. connection pipe with brass unions 15 mm nominal bore: c)45 cm(18\\") length |
| 36 | Providing and placing on terrace roof of floor two (1st flor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996. c)1000 lit. capacity |
| 37 | Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed: a) 110 mm dia |
| 38 | b) 75 mm dia |
| 39 | Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating. a) 110 mm dia |
| 40 | b) 75 mm dia |
| 41 | Providing and fixing single tee of rigid PVC (approved make) for S.W.R. pipes including lubricating etc. complete, without door: |
| 42 | b) 110 mm dia. |
| 43 | a)75mm dia. |
| 44 | Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door : |
| 45 | a) 110 mm dia |
| 46 | b) 75 mm dia |
| 47 | Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door : a) 110 mm dia |
| 48 | Providing and fixing U.P.V.C. pipe clips (approved make ) for S.W.R. pipes : |
| 49 | a) 110 mm dia |
| 50 | b) 75mm dia |
| 51 | Providing and fixing R.P.V.C. vent cowl: |
| 52 | a) 110 mm dia |
| 53 | b) 75 mm dia |
| 54 | Providing and fixing NICKEL chrome plated copper alloy Fancy BIB Cock Short Body Jaquar make or equivalent. Confirming to IS 8931;1993, a) 15mm nominal bore |
| 55 | Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with sheet flance 20mm Jaquar make or equivalent. Confirming to IS 8931;1993, a) 20mm nominal bore |
| 56 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing. b) 20 mm dia nominal outer dia pipes. the pipes with clamps at 1 mt. spacing. b) 20 mm dia nominal outer dia pipes. |
| 57 | Providing & fixing bevelled edge mirror of superior glass (5mm thk) of approved Quality, shape & size complete with CP brass screws and washers, Cleats, CP studs etc Complete. |
| 58 | Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work. I) SCH-40(blue)/(white) |
| 59 | a) 20mm outer dia. |
| 60 | c) 32mm outer dia. |
| 61 | Providing and fixing 150 mm. bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete. |
| 62 | Providing & fixing chromium plated brass tower bolts (barrel type) with necessary screws complete. a) 250 x 10 mm |
| 63 | Providing and fixing chromium plated brass handle with necessary screws etc. complete. a) 125 mm |
| 64 | Providing and fixing chromium plated brass rising hinges with necessary screws etc. complete. (right or left) b) 125 mm |
| 65 | Providing and fixing NICKEL chrome plated copper alloy Fancy waste coupling 32 mm with 190 mm long connection pipe wall flance Jaquar make or equivalent. Confirming to IS 8931;1993 |
| 66 | Provided and fixing chromium plated brass 100-mm. rim latch and lock and a pair of knobs with necessary screws etc. complete (Indian make of approved quality). |
| 67 | Providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embeded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size. b) 40 x 3 mm flat iron hold fast, 15 cm long Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender