Tender for Tender for Construction Of A Fodder Store Within The Gaushala (Cattle Shelter) Premises Located At Manjhalepur, Within The Municipal Limits.
Tender Value
10.35 Lakhs
Estimated cost
Bid Submission
29 Sep 2026
11 days left
EMD
1.03 Lakhs
Bank guarantee accepted
Document Fee
1528
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Barabanki → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of A Fodder Store Within The Gaushala (Cattle Shelter) Premises Located At Manjhalepur, Within The Municipal Limits.
BOQ
| Sl. No. | Item Description |
| 1 | Site clearance and malva Cleaning of side and etc & Complete |
| 2 | Excavation in Foundation in Ordinary Saoil ( Loam clay or sand ) including filling lift upto 1.50 meter and lead upto 30 mt including filling , wareting and ramimng of excated wotk into treanches etc as directed by E-in-Charge upto a distance of 30 m From the foundation trenches in S.I.NO. 251 |
| 3 | Providing and laying Cement Concrete 1:6:12 (1 cement :4 fine sand 8 graded Brick Ballast 40 mm nominal size ) including supply of all materials and labours and T&P etc Required for proper comlete ,also including cost of foemwork in foundation in [S.I.NO.273] |
| 4 | R.C.C. work with cement approved course sand and 2cm (3/4') gauge approved stone ballast in the proportion of 1:2:4 but for slab excluding supply of reinforcement and its bending but includiing necessary centering and uttering etc and also including supply of all meterials laboursnd T&P etc required for proper completion of the work above but in RCC Columns in [DAR NO.5.2.2] |
| 5 | First Class brick work in 1:4 in cement and coase sand of 1.25 F.M. mortar in foundation and plinth inclding supply of all materials and labours and T.&P. etc requiredfor proper completion of the work in S.I. no. 305(b) |
| 6 | R.C.C. work with cement approved course sand and 2cm (3/4') gauge approved stone ballast in the proportion of 1:2:4 but for slab excluding supply of reinforcement and its bending but includiing necessary centering and uttering etc and also including supply of all meterials laboursnd T&P etc required for proper completion of the work S.I. nO-285A |
| 7 | First Class brick work in 1:4 in cement and coase sand of 1.25 F.M. mortar in foundation and plinth inclding supply of all materials and labours and T.&P. etc requiredfor proper completion of the work in Super stracture [SOR.NO. ] |
| 8 | 12 mm cement plaster of mix 1:3 with cement & fine sand in single Coat on flair site in bed and wall including all materials asnd labours |
| 9 | Milt steel or iron in plain work such as reinforced concrete or reinforced brick work wrouhgt to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastages and over lapping and hookes S.I.NO.504 (U-Bar@15cm c/c) |
| 10 | M.S. Steel work in build up tuber 110mm dia m.s. pipe thickness 3 mm @20.10kg/rmt |
| 11 | 50 mm thick Cement concrete flooring 1:1.5:3 (1 cement : 1.5coarse sand : 3 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost base Concrete S.I. No-604 A |
| 12 | Providing and fixing precoated galvanised iron profile sheets {size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.D.S.R No-12.50 738.65X0.735=542.90 |
| 13 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 14 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade |
| 15 | sand filling including all materials and labours etc all complete. |
| 16 | Supply and fixing of colbeible door shutter etc all complete 80x1.25mm M.S. Laths With 1.25 mm Thick Top Cover S.I. No-10.6.1 |
| 17 | Providing and fixing ball bearing for rolling Shutter etc all complete. S.I. No-10.7 |
| 18 | Extra for providing mechanical device chain and crank operation for oprating rolling shutters. S.I. no-10.8 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender