Tender For Supply ,Errection & Commissioning By Extension Of Ht/Lt Line Using 70 Sqmm Covered Conductor Including Installation Of 1X100 Kva Distribution Transformer For Providing 3-Phase Service Connection To Newly Constructed (Dws-Jjm Scheme) Innova
Tender Value
16.24 Lakhs
Estimated cost
Bid Submission
14 Sep 2026
6 days left
EMD
32530
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sepahijala → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply ,Errection & Commissioning By Extension Of Ht/Lt Line Using 70 Sqmm Covered Conductor Including Installation Of 1X100 Kva Distribution Transformer For Providing 3-Phase Service Connection To Newly Constructed (Dws-Jjm Scheme) Innovative Scheme At Ward No. 06 Of Chowmuhani Gp Under Nalchar Rd Block Within The Jurisdiction Of Esd-Nalchar.(Partial Trunkey Basis)
BOQ
| Sl. No. | Item Description |
| 1 | A) Supply of the following as per Bid document and as per standard practice of TSECL:- |
| 2 | Steel Tubular Pole 8 m long Galvanized |
| 3 | Steel Tubular Pole 9 m long galvanized |
| 4 | PVC CABLES (SINGLE CORE) 4 mm2 |
| 5 | PVC CABLES (SINGLE CORE) 16 mm2 |
| 6 | PVC CABLES (SINGLE CORE) 70 mm2 |
| 7 | LT AERIAL BUNCHED CABLE 3x50+1x16+1x35 sq.mm |
| 8 | ACCESSORIES OF HT AERIAL BUNCHED CABLESuspension Clamp. |
| 9 | ACCESSORIES OF LT AERIAL BUNCHED CABLESuspension Clamp (35-50mm) |
| 10 | ACCESSORIES OF LT AERIAL BUNCHED CABLEDead end Clamp (35-50 mm) |
| 11 | ACCESSORIES OF LT AERIAL BUNCHED CABLEService Anchor Clamp (18-50mm) |
| 12 | ACCESSORIES OF LT AERIAL BUNCHED CABLE3-Ph. Dist. Box (25-50 mm) |
| 13 | ACCESSORIES OF LT AERIAL BUNCHED CABLEIPC Main 16-95 Sq. mm &Tap 4 to 35(50) Sq. mm |
| 14 | ACCESSORIES OF LT AERIAL BUNCHED CABLE -Cable End Cap (25-35 mm) |
| 15 | ACCESSORIES OF LT AERIAL BUNCHED CABLE -Cable Ties |
| 16 | ACCESSORIES OF LT AERIAL BUNCHED CABLE -Eye Hook |
| 17 | ACCESSORIES OF LT AERIAL BUNCHED CABLE -Pole clamp (25/50 mm) |
| 18 | Rewireable Porcelain Cut out 100 Amp |
| 19 | 11KV Polymer composite 45 KN Disc Insulator |
| 20 | 11KV Polymer Pin Insulator |
| 21 | L.T. Stay insulator |
| 22 | 11 KV Stay insulator |
| 23 | 11KV Disc fittings Up to 7/3.8mm, 2-U Bolt type |
| 24 | 11KV Gang Operated Switch (Polymeric type) |
| 25 | LIGHTINING ARRESTOR 9KV, 5KA Polymeric L/A |
| 26 | Stay set complete |
| 27 | GI Stay wire stranded stay wire 7-4mm |
| 28 | NUTS AND BOLTS 16 x 75mm. (3) |
| 29 | NUTS AND BOLTS 12 x 300mm. (12) |
| 30 | 11 KV Drop out Switch DOF Polymeric 3ph |
| 31 | 11 KV Covered Conductor (70 SQMM) |
| 32 | Channel 100x50x6mm (Galvanised) |
| 33 | Channel 75x40x6mm (Galvanised) |
| 34 | Angle 65X65X6mm (Galvanised) |
| 35 | Angle 50x50x6mm (Galvanised) |
| 36 | Aluminium Lugs 70mm sq |
| 37 | Grouting for Steel Pole @0.273 Cum/Pole |
| 38 | Non-metallic helical ties for covered conductor |
| 39 | Insulating Piercing Connector for 11 kV CC to CC 70 sqmm |
| 40 | Insulating Piercing Connector for 11 kV CC 70 sqmm to Bare 75-150 sqmm |
| 41 | 11 KV 70 sqmm covered conductor End seal caps, heat or cold shrink type |
| 42 | Supply of stay clamp(50*6) |
| 43 | 2) Errection of the following as per Bid document and as per standard practice of TSECL:- |
| 44 | Erection of Stay set direct in earth complete with 19mm x 1800 mm long stay rod, anchor plate of size 300 x 300 x 8 mm,thimble, turn buckle, 7/3.15 mm dia G.I Standed stay wire and stain insulator etc. with Supply of M.S.Clamp,Nuts & Bolts etc. as required. and making completein all respect |
| 45 | Erection of O type bracket for more than LT 5-wireof 50 x 50 x6mm / 65 x65 x 6 mm( Excluding thecost of Back Clamp, Nuts & Bolts) |
| 46 | Erection of M.S.Angle Cross-Arm,1.0 to 2.5 Mtr.Long 65 x65 x 6 mm ( Excluding thecost of BackClamp, Nuts &Bolts) |
| 47 | Erection of M.S.Channel Cross-Arm,1.3 to 2.8 Mtr.Long75 x40 x 40 x 6 mm ( Excluding thecost ofBack Clamp, Nuts &Bolts) |
| 48 | Erection of M.S.Channel Cross-Arm,0.6 to 2.8Mtr.Long100 x50 x 50 x 6 mm ( Excluding the cost ofBackClamp, Nuts & Bolts) |
| 49 | Erection of 11KV Pin insulator along with Pin. |
| 50 | Erection of 11KV Single Disc insulator set along with necessary fittings |
| 51 | Earthing with G.I pipe 2.5mtr. Long and 40mm dia, including excavation, refilling with alternate layer of salt & Charcoal as per drawing (excluding supply of G.I.Pipe, Salt & Charcoal, Gi wire, nuts &boIts, etc. as required) |
| 52 | Febrication of Cross-Arms by MS Channel/MS Angle as per specification |
| 53 | Erection of 9KV,5KA single pole metal oxide gapless type LA , including necessary connection complete as per technical specification |
| 54 | Erection of 11KV DOF unit set of three nos. including necessary connection complete as per technical specification.(Excluding the cost of back clamp, Nuts & Bolts) |
| 55 | Erection of 11KV 200 Amp. GOS unit set of three nos. including necessary connection complete as per technical specification. (Excluding the cost of back cIamp,Nuts & Bolts) |
| 56 | Installation/Positioning of 11/0.430KV,3-Phase 100KVA ofDistribution Transformer on Pole with necessary connections & fitting fixing of all allied accessories components as required for making complete inall respect for energizing |
| 57 | Providing Three Phase Service Connection with laying PVC cable from nearby Electrical pole to Premises upto 35mtr. in length supported by G.I.Wire,Reel Insulator i/c fitting fixing of Energy Meter as required |
| 58 | Erection of 8.0mtrs length of Steel Tubular POLE at any kind of soil , including excavation of earth, refilling the pit with soil upto the ground level, ramming and making complete in all respect. |
| 59 | Erection of 9.0mtrs length of Steel Tubular POLE at any kind of soil , including excavation of earth, refilling the pit with soil upto the ground level, ramming and making complete in all respect. |
| 60 | Positioning of cable drum, removing of cable fromdrum and Laying, hoisting & drawing of AB Cable3X35-50+1x16-25+1x35-50sqmm of 101 KV gradeas per direction of EngineeringIn-Charge. |
| 61 | Wooden Plank For Cut Out |
| 62 | Supply of febricated clamps of assorted size of MS flat (50 x 6 mm) with double coat of red oxide primercoating |
| 63 | Supply of M.S.Nuts & Bolt i/c Washer of assortedsize ISI Marked machine made |
| 64 | Supply of 2.5mtr. Long , 40mm dia G.I.Pipe Make: TATA/ JINDAL) |
| 65 | Supply of 60Kg Salt & 55Kg Charcoal ( For 1 Pit). |
| 66 | Erection & Fitting-Fixing of Insulated suspentionClamp including Pole clamp, Eye hook for cable massenger of 1.1 IV grade on PCC/Steel Pole with the help Pole brackets or Steel Straps &buckIes asper direction of Engineering In-Charge. |
| 67 | Erection & Fitting-Fixing of Insulation Piercing Connectors(IPC) all sizes of 1.1 IV grade including connection from main cable to Distribution box, Tee-Off line asper direction of Engineering In- Charge. |
| 68 | Maintaining adequate clearance from overhead live conductors by Trimming of tree branches for Way Leaves |
| 69 | Erection & Fitting-Fixing of Insulated Dead end enchoring Clamp including Pole clamp, Eye hook for cable massenger of 1.1 KV grade on PCC/Steel Pole with the help Pole brackets or Steel Straps &buckIes asper direction of EngineeringIn-Charge. |
| 70 | Supply & Erection of S/S Fencing as per Specification |
| 71 | Providing Single Phase Service Connection with laying PVC cable from nearby Electrical pole to Premises upto 35mtr, in length supported by G.I.Wire,Reel Insulator i/c fitting fixing of Energy Meter as required |
| 72 | Stringing of 11KV Covered Conductor 70 sqmm (all 3 phases) as per specification and approved drawings, stringing of covered conductors at proper tension/ sag, fitting and fixing of all accesories Piercing Connectors , Jointing Sleeves, insulator binding using approved Non-metallic helical ties, jumpering, connections to other lines etc. complete in all respect. |
| 73 | C) Carriage of the following as per Bid document and as per standard practice of TSECL:- |
| 74 | Carriage of . of 7.5mtrs /8.0mtrs/ 9.0mtrs length of Steel Tubular Poles by Mechanical Transport from the Electrical Sub-Divisional Site Store to working siteVis-a-vis, including loading, unloading and stacking as required a) Upto the lead range 25 KM i) For maximum 8 (eight) poles From MMD Store toSub Division Store |
| 75 | Carriage of 11/0.430, 3-Phase 100KVA by Mechanical Transport trom the Site/Store/Worshop to working site Vis-a-vis including loading, unloading and placing on base, as required,a) Upto the lead range 25KM From MMD Storeto Sub Division Store |
| 76 | Carriage of G.O.S, D.O.F,L.A,etc., by Mechanical Transport from the Electrical Sub-Divisional Site Store to working site Vis-a-vis, including loading, unloading and stacking as required a) Upto the lead range 0-25KM From Sub Division Store to work Site |
| 77 | Carriage of materials such as Cable,AAC, AAAC, ACSR,G.I,Wire,Cross-Arm,Stay Set,lnsulators etc., by Mechanical Transport from the Electrical Sub- Divisional Site Store to working site Vis-a-vis, including loading, unloading and stacking as required, upto the lead of 25KM & 50KM.a) Upto the lead range 25KM FromMMD Store to Sub Division Store Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender