Tender For Construction of Main Gate At Bhagsunag Temple Complex
Tender Value
6.33 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
10 days left
EMD
12700
Bank guarantee accepted
Document Fee
413
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction of Main Gate At Bhagsunag Temple Complex
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. as per PWD specification including carriage of material in all leads and lift and direction of Engineer-in-charge. |
| 2 | Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering- All work up to plinth level 1:4:8(1 Cement: 4 coarse sand) : 8 grade stone aggregate 40 mm nominal size) as per PWD specification including carriage of material in all leads and lift and direction of Engineer-in-charge. |
| 3 | Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints in Cement Mortar 1.6 (1 cement : 6 sand) as per PWD specification including carriage of material in all leads and lift and direction of Engineer-in-charge. |
| 4 | Stone work ashlar punched (ordinary work) in superstructure upto floor two level in cement mortar 1:6 (1 cement : 6 sand) including pointing with cement mortar 1:2:1 (1 cement : 2 sand) plain ashlar or ashlar punched in square or rectangular pillars as per PWD specification including carriage of material in all leads and lift and direction of Engineer-in-charge. |
| 5 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but, excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size as per PWD specification including carriage of material in all leads and lift and direction of Engineer-in-charge. |
| 6 | Providing and fixing wooden plank ceiling with planks overlapping each other and jointed with wood screws (frame work to be paid for separately) 1st class deodar wood. 20 mm thick. as per PWD specification including carriage of material in all leads and lift and direction of Engineer-in-charge. |
| 7 | Slate roofing with 7.5 cm Single lap single layer fixed on wooden battens (wood work to be paid for separately) With slates 40x20 cm size etc complete as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royalty, maliana and all type of taxes imposed by the Government |
| 8 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete 0.63 mm thick with zinc coating not less than 275 gm/m². as per PWD specification including carriage of material in all leads and lift and direction of Engineer-in-charge. |
| 9 | Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete 1.60 mm thick with zinc coating not less than 350 gm/m² as per PWD specification including carriage of material in all leads and lift and direction of Engineer-in-charge. |
| 10 | Providing and fixing M.S. B.P Sheet 0.81mm 20mm thick in eaves board/fascia/soffits/ceiling including cutting, fixing and welding to steel of members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (Base members of steel work shall be measured & paid separately) as per PWD specification including carriage of material in all leads and lift and direction of Engineer-in-charge. |
| 11 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in gratings, frames, guard bar, ladder, railings, brackets, tees and similar works as per PWD specification including carriage of material in all leads and lift and direction of Engineer-in-charge. |
| 12 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in gratings, frames, guard bar, ladder, railings, brackets, tees and similar works as per PWD specification including carriage of material in all leads and lift and direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender