Tender For Laying Of Ppr Pipe Line From Tugapur No. 8 To Rest C Water Treatment Plant Under Sub Division No. Ii, Nacd, Apwd, Mayabunder In Lieu Of Providing And Supplying Drinking Water Through functional house hold tap connection Under Jal Jeevan Mi
Tender Value
53.44 Lakhs
Estimated cost
Bid Submission
11 Sep 2026
4 days left
EMD
1.06 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
North and Middle Andaman → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Laying Of Ppr Pipe Line From Tugapur No. 8 To Rest C Water Treatment Plant Under Sub Division No. Ii, Nacd, Apwd, Mayabunder In Lieu Of Providing And Supplying Drinking Water Through functional house hold tap connection Under Jal Jeevan Mission At Tugapur No. 2, Lal Tikrey & Pahalgaon Village In Pahalgaon Panchayat Under Sd-Ii, Nacd Apwd, Mayabunder.Sw:- Construction Of Pump House, 10000 Ltr. Capacity Sump & Overhead Tank I/C Laying Of Pipeline Alongwith 01 No. 08 Hp Diesel Engine Driven Water Pump Wherever Required From Jharna Nallah Check Weir To Madhu Tikrey Area Of Tugapur No. 8 Village.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. |
| 2 | All kinds of soil |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 4 | All kinds of soil. |
| 5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lif. |
| 6 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 8 | 1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 9 | 1:3:6 (1 Cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 10 | 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 11 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. |
| 12 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
| 13 | 1:1.5:3(1 cement: 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 14 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 15 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 16 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 18 | Foundations, footings, bases of columns, etc. for mass concrete |
| 19 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 20 | Suspended floors, roofs, landings, balconies and access platform |
| 21 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 22 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement: |
| 23 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 24 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 25 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 26 | Electric resistance or induction butt welded tubes |
| 27 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 28 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 29 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. |
| 30 | Providing and fixing bolts including nuts and washers complete. |
| 31 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: |
| 32 | Two or more coats on new work |
| 33 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 34 | 40 mm thick with 20 mm nominal size stone aggregate |
| 35 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) |
| 36 | 250x16 mm |
| 37 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 38 | 150x10 mm |
| 39 | Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. |
| 40 | 0.80 mm thick with zinc coating not less than 275 gm/m2 |
| 41 | 12 mm cement plaster of mix: |
| 42 | 1:4(1 cement: 4 fine sand) |
| 43 | 12 mm cement plaster finished with a floating coat of neat cement of mix: |
| 44 | 1:4(1 cement: 4 fine sand) |
| 45 | 6 mm cement plaster of mix: |
| 46 | 1:3(1 cement :3 fine sand) |
| 47 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work |
| 48 | 65 mm dia nominal bore |
| 49 | 50 mm dia nominal bore |
| 50 | 40 mm dia nominal bore |
| 51 | 25 mm dia nominal bore |
| 52 | 20 mm dia nominal bore |
| 53 | 15 mm dia nominal bore |
| 54 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : |
| 55 | 65 mm nominal bore |
| 56 | 50 mm nominal bore |
| 57 | 40 mm nominal bore |
| 58 | 25 mm nominal bore |
| 59 | 20 mm nominal bore |
| 60 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : |
| 61 | 25 to 40 mm nominal bore |
| 62 | 50 to 80 mm nominal bore |
| 63 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 64 | 25 mm nominal bore |
| 65 | 20 mm nominal bore |
| 66 | 40 mm nominal bore |
| 67 | 50 mm nominal bore |
| 68 | 65 mm nominal bore |
| 69 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : |
| 70 | 80 mm diameter pipe |
| 71 | 65 mm diameter pipe |
| 72 | 50 mm diameter pipe |
| 73 | 40 mm diameter pipe |
| 74 | 25 mm diameter pipe |
| 75 | 20 mm diameter pipe |
| 76 | 15 mm diameter pipe |
| 77 | Providing and fixing brass bib cock of approved quality : |
| 78 | 15 mm nominal bore |
| 79 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. |
| 80 | G.I. pipes |
| 81 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 82 | Providing and fixing pre-painted galvalume (PPGL) steel profile sheets AZ-150 of brand Tata Bluescope steel, Everest Industries Ltd., JSW Steel Ltd., Jindal India Ltd. or equalavent (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with aluminium zinc coating 150 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling / self tapping aluminium screws (Xylan) of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required |
| 83 | Providing and fixing pre-painted galvalume (PPGL) steel profile sheets accessories 0.50 mm (+0.05 %) total coated thickness, with aluminium Zinc coating 150 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : of brand Tata Bluescope steel, Everest Industries Ltd., JSW Steel Ltd., Jindal India Ltd. |
| 84 | Ridges plain (500 - 600mm) |
| 85 | Providing, supplying and fixing 65mm nominal bore CI foot valve, double door type of approved make suitable for water supply complete with CI body, doors, hinge, spindle, strainer, flange, connection, nuts, bolts, rubber gasket and all accessories testing and commissioning complete as required. |
| 86 | Providing and fixing GI plain sheet 60 cm width all round the junction of water tank and lapping of shuttering to avoid leekage. |
| 87 | 0.63mm thick with zinc coating not less than 275 gm/m2 |
| 88 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 89 | 15 mm nominal bore |
| 90 | Supplying, Installation, Testing and commissioning of Diesel engine driven water pumpset consisting of 08 HP, 1800 RPM, single cylinder vertical water cooled diesel engine coupled with multistage water pump having a capacity to deliver 1.0 LPS at a total head of 100 meters included supplying and installation of base frame with foundation bolts and nuts, coupling assembly, etc. with all accessories as required similar to Kirloskar SV1 08 HP engine coupled with Kirloskar 8SP7 7 stage pump or its equivalent of reputed make. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender