Tender For Special Repairs And Maintenance Of Kannur Lighthouse
Tender Value
48.62 Lakhs
Estimated cost
Bid Submission
25 Sep 2026
10 days left
EMD
97253
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kannur → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs And Maintenance Of Kannur Lighthouse
BOQ
| Sl. No. | Item Description |
| 1 | Repair works to cracks in plastering / masonary / R.C.C. works: Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The crystallie mortar shall conform to the EN 1504-3 having compressive strength Class R4 ≥45 MPa and adhesive bond strength Class R3 ≥1.5 MPa. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.For sealing cracks and faulty construction joints, routed out/ making U-shape groove size 25x25 mm and then primed the area with integral crystalline slurry @0.05 kg/running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50 kg/running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05 kg/running metre per coat.including supply of all materials, labours ,scaffolding tools & plants etc. complete. |
| 2 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges,making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts ,supply of all materials, labours ,scaffolding tools & plants etc. all complete as per direction of Engineer-In-Charge . |
| 3 | Providing, mixing and applying epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make on chipped portion of RCC as per specifications. including supply of all materials, labours ,scaffolding tools & plants etc. all complete as per direction of Engineer-In-Charge . |
| 4 | Providing and laying SBR Polymer modified (of approved make @ minimum 2% by wt. of cement used) plain/reinforced concrete jacket for the structural members e.g. columns, pillars, piers, beams etc with concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] with specified average thickness all-round existing core of RCC member. Note: Rates shall be for finished surface area of concrete and shall include the cost of making holes in existing RCC slab, if required, for pouring concrete in shuttering mould of jacket and appropriate approved Super-Plasticiser for rendering concrete as flowable self compacting and SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument) 75 mm thick in Grade M25 with cement content not less than 330 kg per cum |
| 5 | Drilling suitable holes upto and including 12 mm dia. in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100 mm upto 200 mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement,all complete as per direction of Engineer-In-Charge.including cost of all materials, labour, tools & plants etc. complete . |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. ThermoMechanically Treated bars of grade Fe-500D or more. including cost of all materials, labour, tools & plants etc. complete . |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts .including cost of all materials, labour, tools & plants etc. complete . |
| 8 | Providing and fixing scaffolding system to support the canopy beam and slab, upto 5.00 metre height, above ground level, made with 40 mm dia G.I. telescopic adjustable props, placed 0.30 metre centre to centre,braced with M.S. Tubes, M.S. clamps etc.and maintaining it in a serviceable condition for supporting the structure and removing it thereafter as directed. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc.,as per directions and approval of Engineer-in-charge including cost of all materials, labour, tools & plant etc complete as directed. |
| 9 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).Including cost of all materials, labour, tools & plants etc. complete . |
| 10 | Replacing broken fittings of doors, windows with new fittings of approved quality after removing carefully the damaged ones from position, including supply of all materials, labour, tools & plants etc. complete.-Providing and fixing stainless steel butt hinges 100x60x2.5 mm with necessary stainless steel screws etc. as directed including cost of all materials, labour, tools & plants etc. complete . |
| 11 | Providing and fixing stainless steel butt hinges 75x50x2.5 mm with necessary stainless steel screws etc. as directed including cost of all materials, labour, tools & plants etc. complete . |
| 12 | Providing and fixing 100 mm brass Handle with necessary screws including cost of all materials, labour, tools & plants etc complete as directed . |
| 13 | Providing and fixing 125 mm brass Handle with necessary screws including cost of all materials, labour, tools & plants etc complete as directed . |
| 14 | Providing and fixing bright finished 300 mm brass hard drawn Aldrop with necessary screws etc including cost of all materials, labour, tools & plants etc complete as directed . |
| 15 | Providing and fixing bright finished 150x10 mm brass Tower bolt with necessary brass screws etc including cost of all materials, labour, tools & plants etc complete as directed . |
| 16 | Providing and fixing bright finished 100 x10 mm brass Tower bolt with necessary brass screws including cost of all materials, labour, tools & plants etc complete as directed . |
| 17 | Providing and fixing bright finished 200 mm brass hooks and eyes with necessary screws etc including cost of all materials, labour, tools & plants etc complete as directed . |
| 18 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including cost of all materials, labour, tools & plants. |
| 19 | Dismantling W.C. Pan (Inidan/Europian)of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-inCharge,including cost of all labours, tools & plants etc. complete as directed. |
| 20 | Dismantling of unserviceable/damaged Wash Basin of any size including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including supply of all labours, tools and plants, finishing etc. complete as directed by the engineer in charge. |
| 21 | Providing and fixing following fixtures of approved make and as directed including supply of all materials, labour, tools & plants, etc. complete.-Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers etc. including cost of all materials, labour, tools & plants etc complete as directed . |
| 22 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour- 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. including cost of all materials, labour, tools & plants etc complete as directed. |
| 23 | Providing and fixing 100 mm C.P. brass shower rose with 15 or 20 mm inlet including cost of all materials, labour, tools & plants. |
| 24 | Providing and fixing 15mm C.P brass long body bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore including cost of all materials, labour, tools & plants etc complete as directed. |
| 25 | Providing and fixing 15mm health faucet chromium of approved quality including cost of all materials, labour, tools & plants etc complete as directed. |
| 26 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 32mm nominal dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.including cost of all materials, labour, tools & plants etc complete as directed. |
| 27 | Providing and fixing on wall face unplasticised Rigid PVC pipes 110mm dia conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 28 | Providing and fixing wash basin size (550x 400 mm)(Cera / Parryware/ Hindware) with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require,removing the damage washbasin etc complete as directed including cost of all materials, labour, tools & plants. |
| 29 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with white seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required including cost of all materials, labour, tools & plants. |
| 30 | Rewedging and cramping of doors,windows and ventilator for easy opening and closing including plaining the side of the shutters taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames,including replacement of hinges with screws, etc. as required as per the direction of the Engineer-in-charge including cost of all materials, labour, tools & plants,scaffolding etc., complete . |
| 31 | Repairs to furniture of staff quarters including replacing unserviceable members cost of all materials, labour charges and tools & plants etc. complete as directed . -Replacing damaged plywood of cots with 8 mm thick marine plywood of approved brand after cutting, removing the damaged one, cutting to size and fixing new plywood with panel pins all as directed, including supply of all materials, labour, tools & plants etc. complete. |
| 32 | Repairs to wooden Meat safe including minor repair works, replacing damaged nylon net with new and wooden beading etc. including fabricating, fixing in position as directed including supply of all materials, labour, tools & plants etc. complete |
| 33 | Repairs to wooden chair including replacing damaged seat & back of the chair with new one with superior hard wood / plywood etc. including fabricating, fixing in position as directed including supply of all materials, labour, tools & plants etc. complete |
| 34 | Repairs to wooden Dining table including, replacing the damaged plywood top with 12mm thick plywood, fixing mica sheet etc . including fabricating, fixing in position as directed including supply of all materials, labour, tools & plants etc. complete |
| 35 | Repairs to wooden centre table / Teapoy including replacing the damaged plywood top with 12mm thick plywood, fixing mica sheet etc. including fabricating, fixing in position as directed including supply of all materials, labour, tools & plants etc. complete |
| 36 | Polishing with polyurethane (PU) wood finish on previously polished wood and wood based surface to give an even surface including cleaning & preparing the surface of all dirt , dust and sand papered smooth etc including cost of all materials, labour, tools & plants complete as directed.-Wooden Cot |
| 37 | Wooden Dining table |
| 38 | Wooden Dining chair |
| 39 | Wooden Office Table |
| 40 | Wooden Office chair |
| 41 | Providing and fixing 35mm thick Second class teak woodpanelled or panelled and glazed shutters for doors,windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, including cost of all materials, labour, tools & plants,scaffolding etc. complete as per direction of Engineer-in-charge. (Note:Butt hinges and necessary screws shall be paid separately) |
| 42 | Providing and fixing second class teak wood panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. |
| 43 | Providing and fixing glass panes of windows with 4mm thick plain glass after removing the broken glass from wood frame and fixing with wooden reaper and nails including cost of all materials, labour, tools & plants,scaffolding etc complete as directed. |
| 44 | Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm with 2nd class teak wood beading 62x19 mm ,after removing the old net including cost of all materials ,labour ,tools and plants , brass screws etc. complete as directed . |
| 45 | Demolishing nominal concrete 1:4:8 or leaner mix (including equivalent design mix) cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.including cost of all materials, labour, tools & plants,scaffolding etc complete as directed. |
| 46 | Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.including cost of all labour, tools & plants etc complete as directed. |
| 47 | Dismantiling tile work in floors and wall laid in cement mortar including stacking material within 50 meters lead for thickness of tile 10mm to 25mm .including cost of all labour, tools & plants etc complete as directed. including cost of all labour, tools & plants etc complete as directed. |
| 48 | Providing and laying Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. including cost of all materials, labour, tools & plants etc complete as directed. |
| 49 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. including cost of all materials, labour, tools & plants etc complete as directed. |
| 50 | Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. |
| 51 | Demolishing brick work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.including cost of all labour, tools & plants etc complete as directed. |
| 52 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand).including cost of all materials, labours, tools & plants,scaffolding etc. complete as directed. |
| 53 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead including cost of all labour, tools & plants,scaffolding etc complete as directed. |
| 54 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)including cost of all materials, labours, tools & plants,scaffolding etc. complete as directed. |
| 55 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) (b) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry including cost of all materials, labour,scaffolding, tools & plants etc complete as directed. |
| 56 | Providing and fixing Broken glass pieces over coping of compound wall in cement mortar for security purpose including cost of all materials, labour, tools & plants etc complete as directed by Engineer -in- charge, including cost of all materials, labour, tools & plants etc complete. |
| 57 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 58 | Applying priming two coats with cement primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre including cost of all labour,scaffolding, tools & plants etc complete as directed. |
| 59 | Wall painting two coats with acrylic emulsion paint,exterior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.And including the cost of removing the dust by scrapping and sand pappering and prepare the surface clean,all materials, labours, tools & plants,scaffolding etc. complete as directed |
| 60 | Wall painting (two coat) with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour, including cost of all materials, labours, tools & plants,scaffolding etc. complete as directed. |
| 61 | Painting two coats with Synthetic enamel paint (Asian / Berger/or equivalent) of approved brand and manufacture of required colour to the exterior of the Lighthouse Tower to give an even shade after scrapping and cleaning the surface and applying a coat of cement primer etc as directed including cost of all materials, labour, tools & plants ,scaffolding etc complete. |
| 62 | Painting two coats of Synthetic enamel paint (Asian / Berger) of approved quality and color to the wooden doors, windows, Ventilators etc of the building after, cleaning all dirt, dust, sand papering, applying a coat of metal primer to rods wherever directed , including cost of all materials, labour, tools, scaffolding etc. complete. |
| 63 | Finishing with Epoxy paint (two or more coats) on steel work at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, cost of all materials, labour, tools, scaffolding etc. complete. etc. complete. |
| 64 | Supplying Chlorpyriphos/ Lindane emulsifiable concentrate of 20%chemical emulsion in sealed containers including delivery as specified. including cost of all materials labour, tools and plants etc complete as directed. |
| 65 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. |
| 66 | French spirit polishing One or more coats on old work. including cost of all materials, labours, tools & plants,scaffolding etc. complete as directed. |
| 67 | Providing and fixing stainless steel ( Grade 316) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).including cost of all materials, labour, tools & plants etc complete. |
| 68 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification including cost of all materials, labour, tools & plants etc. complete as directed. |
| 69 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing.- 30 mm thick plain PVC door shutters |
| 70 | Repairs to plaster of thickness 12 mm to 20 mm With cement mortar 1:4 (1cement: 4 coarse sand) in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 71 | Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1cement: 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. With granite stone of area less than 0.50 sqm .complete as per direction of Engineer-in-Charge, including cost of all materials, labour, tools & plants etc complete. |
| 72 | Providing edge moulding to 18 mm thick Granite work including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge, including cost of all materials, labour, tools & plants etc complete. |
| 73 | Dismantling aluminium/Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 74 | Providing and fixing tiled false ceiling of GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main\\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, |
| 75 | Cleaning of open well of LH compound including bailing out water, removal of all debrises / mud etc, disposal of the debris with in a lead of 50m, cleaning of the well with fresh water etc complete, including cost of all materials, labour, tools & plants etc complete as directed. |
| 76 | Cleaning of UG sump and Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge,including cost of all materials, labour, tools & plants and scaffolding etc. |
| 77 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including all labours,tools & plants, loading, transporting, unloadinge etc. to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 78 | Surface dressing all kinds of soil of the ground including removing old grass,vegetation and in equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.including cost of all materials, labours, tools & plantsetc. complete as directed. |
| 79 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead. including supply of all materials, labour, tools&plants etc complete as as per direction of Engineer-in-Charge. |
| 80 | Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc.including supply of all materials, labour, tools&plants etc complete as as per direction of Engineer-in-Charge. (Old CC paver blocks shall be supplied by the department free of cost). |
| 81 | Recovery of scrape value for old dismantled / removed fitting / items. -100mm Butt hinges |
| 82 | 75 mm Butt hinges |
| 83 | 75 mm Brass handle |
| 84 | 100 mm Brass handle |
| 85 | 300 mmBrass Aldrop |
| 86 | 150 mmBrass tower bolt |
| 87 | 200mm Brass tower bolt |
| 88 | 200 mm brass hooks & Eyes Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender