Tender For Mc & Ew (Development And Repair Of Buildings) Construction Of Publication Counter And Public Amenities At Archeological Museum Complex At Sri Suryapahar, Goalpara (2026-27) As Specified
Tender Value
2.98 Lakhs
Estimated cost
Bid Submission
19 Sep 2026
6 days left
EMD
7500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Goalpara → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Mc & Ew (Development And Repair Of Buildings) Construction Of Publication Counter And Public Amenities At Archeological Museum Complex At Sri Suryapahar, Goalpara (2026-27) As Specified
BOQ
| Sl. No. | Item Description |
| 1 | Execution of works |
| 2 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of usefulmaterials near the site and disposal of unserviceablematerials within 50 metres lead.. |
| 3 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below. |
| 4 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm |
| 5 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specification: Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm |
| 6 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture |
| 7 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
| 8 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 10 litre (full flush) capacity-white |
| 9 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan ofsize 580x440 mm. |
| 10 | Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet :250x125x25 mm. |
| 11 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 12 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for thereception of pipes and fittings. |
| 13 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore |
| 14 | Supply and installation of 1000 L good quality reputed brand having ISI mark water tank as per instruction ofengineer in charge. |
| 15 | Provision for clearing out the/flushing out the jammed water pipes in plumbing system of the toilet block for maintaing the even distrubution in the pipes as per direction of engineer in charge. |
| 16 | Provision for installation of PVC door with frame of dimension( 1.80 x 0.90 m) and replacing with ready all necessary fittings and fixtures as per direction of engineer in charge. |
| 17 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood |
| 18 | Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- incharge and panelling with panels of : (Note:- Butt hinges and necessary screws shall be paid separately) 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade -1, medium density flat pressed, three layer particle board FPT- I or graded wood particle board FPTI, conforming to IS : 3087, bonded with BWP type synthetic resin adhesive as per IS : 848 and prelaminated conforming to IS : 12823, Grade 1, Type – II marked. |
| 19 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 20 | Provision for supply and installation of following items having ISI mark of reputed brand for electrification of the toilet block. |
| 21 | a) Switches (06 amp) |
| 22 | b) 12 Module Modular Switch Board |
| 23 | c) 12 Module Modular Switch Plate |
| 24 | d) Copper Wire 1 mm (90 metre Coil) |
| 25 | e) Adhesive Tape |
| 26 | f) PVC Gutka (packet) 1\\" |
| 27 | g) Screw 1\\" |
| 28 | h) Holder |
| 29 | i) LED Blub (12 Watt) |
| 30 | j) Casing Pipe 2'' (10 feet) |
| 31 | k) Installation charges |
| 32 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in- Charge. With cement mortar 1:4 (1 cement : 4 coarsesand |
| 33 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. |
| 34 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in- Charge. Door chowkhats |
| 35 | Provision for supply and installation of following items having ISI mark of reputed brand for water supply. |
| 36 | 1'' CPVC pipe (10 ft) |
| 37 | 1'' L bend plain |
| 38 | 1'' Socket plain |
| 39 | 1'' MAPT |
| 40 | CPVC adesive (200gm) |
| 41 | Taflon Tape |
| 42 | Saddle 125x 1/2'' |
| 43 | R Socket 1'' x 3/4'' |
| 44 | MAPT Brass |
| 45 | 1.5 HP monoblock Centrifugal Pump |
| 46 | Installation charges Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender