Drinking Water Supply and Sanitation Government Departments Closing in 0 days TDR #57360072

Tender For Renovation Of Damin High School, Rajabhita Under Block - Boarijore, District - Godda

Issued by Government Departments · Godda, Jharkhand
Tender Value
21.44 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
0 days left
EMD
43000
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Godda → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Renovation Of Damin High School, Rajabhita Under Block - Boarijore, District - Godda

BOQ

Name of Work:- Renovation of Damin High School, Rajabhita under Block - Boarijore, District - Godda
Sl. No. Item Description
1Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foudation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l. 5.1.1
2Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume).5.1.10
3Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l. 5.6.3
4providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring shuttering finishing and reinforcement all work up to plinth m20 1:1.5:3 5.3.9
5Providing designation 75 B brick work in C.M.(1 :6) in superstructure with approved quality of clean coarse sand of F.M. 2 to2.5 including providing 10 mm thick mortar joints cost of screening materials , scafolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l. 5.2.14
6Providing Tor steel reinforcement of 10mm. ,12mm & 16mm dia. bars as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. 5.5.5
75.5.5
85.5.5
9Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I. 5.10.7
10Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. 5.7.3
115.7.3
12Providing 6 mm thick cement plaster (1:4) in Celling with clean coarse sand of F.M. 1.5 including screening, curing with all lead and 5.7.6
13Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I. 5.8.9
14Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. 5.10.2
15Covering of treated surface with PCC :- Providing 50 mm thick Cement Concrete M20(1:1.5:3) maintaining slope in alternate 2 mt x 2 mt panels with aaproved quality of stone chips of 20 mm 5.12.3
16reinforced cement concrete work in beam ,suspanded floors roofs having slope up to 15\\" landing ,balcnies shelves ,chajjas, lintels bands plainwindow sills, staircases and spiral stair cases above plinth level upto floor five level excluding the cost of centring shuttering finishing and reinforcement all workup to plinth m200 1:1.5:3 5.3.11
17reinforced cement concrete work in walls any thickness including attachments ,butteress ,plinth and string courses fillers clumns pillers piers aboutments posts and struts etcabove plinth level to floor five levell excluding the cost of centring shuttering finishing and reinforcement all workup to plinth m20 1:1.5:3 5.3.10
18Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. 5.7.14
19Supplying and fixing 10 Gauge weld mesh of size 100mm x 100 mm for floor/roof slab concrete screed over the micro beams as reinforcement. The weld mesh shall be fixed as per drawing.
20Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. 5.10.4
21Providing 25mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layers 19mm. Thick (1:2:4)with 12mm to 6mm. Size graded stone chips and top layer 6mm. Thicks (1:2) with 6mm down stone chips, in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royality with all complete as per building specification and direction of E/I. 5.6.7
22Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I. 5.8.17
23Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per building specification and direction of E/l. 5.8.24
24New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) DSR 13.46.1
25Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. 5.8.45
26Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. 5.8.31D
27Providing two coats of synthetic enamel paint of approved shade and make over steel surface including ... all complete as per building specification and direciton of E/l. 5.8.43
28Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of ……….... all complete as per specification and direction of E/l. 3.2.1
29Providing and fixing 1mm thick MS sheet door with frame of 40x40x6 mm angle iron --do--do-- as per E/I. 10.5.1 DSR Main Gate
30Main Gate
31Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush door shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. bathroom door and door 5.4.38
32Supplying, fitting and fixing 20 guage G.C.I, sheet gate fitted on M.S. Angle frame of size 60x60x6mm. including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work. taxes all complete as per drawing specification and direction of E/I Window Repair 5.5.29
33Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm . PRINCIPLE ROOM & COMPUTER ROOM DADO 5.6.28
34Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. D.S.R 12.41 75 mm dia 12.41.1
35110 mm dia 12.41.2
36Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete FOUNDATION AND MAIN PILLAR 5.3.17
37Columns, Pillars, Piers, Abutments, Posts and Struts MAIN PILLAR AND FOUNDATION 5.3.17.6
38Lintels, beams, plinth beams, girders, bressumers and cantilevers 5.3.17.2
39Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. 5.10.1 OLD WALL
40Wiring for light point / exhaust fan point / call bell point with 1.5 sq .mm FRPVC insulated copper conductor single core cable in surface / recessed PVC Conduct, with piano type switch, phenolic laminated sheet, suitable size PVC/G.l. box etx. As 1.1.3
41Wiring for Circuit / submain wiring along with the following size PVC / insulated copper conductor single core cable in surface/recessed PVC conductor single core cable for loop earthing as required. 2x1.5 sq mm+1x1.5 sq mm earth wire 1.7.1
422x2.5 sq mm+1x2.5 sq mm earth wire 1.7.2
43Supplying and fixing following modular type switch / socket on the existing modular plate and switch box including connections as required. 15/16 amps , one way switch 1.24.3
445/6 amps , 3 pin socket outlet 1.24.4
45Supplying and fixing 2 pin 5ams Ceilling rose on the existing junction box/ wooen including connection etc as required. 1.33
46Supplying and fixing batten /angle holder including connection etc as required. 1.34
47Supply installation, testing and commissioning of following size ceiling fan 3 blades confirming to IS:2019 including wiring the down rods of standard length (upto 30cm) with 1.5sqmm .FR PVC insulated, copper wire suitable for 230v 50Hz, single phase supply etc. complete as required. S/F/F ceiling fan/mountain fan with complete job 9.4.1
48S/F/F Exhuest fan with complete job M-775
49S/F/F LED Bulb 9/10 wat with complete job M-855
50Installation testing and commissioning of of Ceilling fan including wiring the down rods of standard length (upto 30 cm ) with 1.5sq mm FR PVC insulated copper conductor single core cable etc.as required. 1.44
51Installation exhaust fan upto 450 mm sweep in the existing opening including making the hole to suit the size of the above fan making good the damage connection testing commissioning etc.as required. 1.48
52S/F Modular boxes, base & cover plate :-Supplying and fixing following size / modules , GI box along with modular base & cover plate for modular switches in recess etc as required. 1.27.1 1 or 2 module (78mmx 78mmx 45mm)
538/9 module (78mm x 230mm x 60mm) 1.27.4
54S/F Piaoo type switch/ socket : lSupptyrng and fxing of following piano type switch / socket on the existing lswitch box / cover including connections etc. as requted 1.23 5/6 amps, one way switch1.23.1
555/6 amps, two way switch 1.23.2
563 pin 5/6 amps, socket outlet 1.23.3
57Cost of drilling in all kinds of soil and rock for Installation on submersible pump set with DTH Rig machine including supply of all materials ,labour,Tools Drilling Rig ,air compressure and equipment as well as fuel lubrications for doing Boring for the construction of 200mm*150mm dia drilled well etc.doing complete job. PHED page no.56 M1035 (a) From 0 to 50m below G.L
58(b) From 51 to 125m below G.L
59Supplying Assembling lowering and fixing in vertical position in bore well,unplasticized PVC medium well casing (CM) pipe of required dia ,conforming to IS : 12818,including required hire and labour charges ,fitting & accessories etc all complete for all depth as per direction of E/I.(200mm nominal sizeb dia) DSR 23.3.3
60Development of tube well in accordance with IS : 2800 (part 1) and IS : 11189,to establish maximum rate of usable water yield without sand content (beyond permissible limit),with required capacity air compressor ,running the compressor for required time till well is fully developed ,measuring yield of well by \\"V\\" notch method or anyother approved method ,measuring static level &draw down etc. by step draw down method ,collecting water samples & getting testedin approved labaratory,I/C disinfection of tube well ,all complete including hire & labour charges of air compressor ,tools & accesories etc.all as per requirement and direction Of E/I. DSR 23.12
61Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing /casing pipe , removable as per requirement ,all complete for borewell of 200mm dia. DSR 23.13.3
62Providing and fixing M.S clamp of required dia to the top of casing /housing pipe of tubewell as per IS: 2800 (part1),including necessary bolts & nuts of required size complete.(200mm Clamp) DSR 23.14.3
63Supplying fitting and fixing of KSB /Kirloskar/CRI make 2.0 HP submersible pump set having head of 135 mtr .Including all taxes ,royalty etc all complete job as per direction of E/I. Supply PHED page 40 M1055
64Supplying fiting and fixing 3 core 4sqmm Flat copper submersible cable Finolex/havels make including all taxes ,royalty etc all complete job as per direction of E/I. Energy page no.36 M1627
65Providing and fixing Chlorinated Polyvinyl chloride (CPVC) pipes ,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings this includes jointing of pipes & fittings with one steps CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of E/I.(32mm dia) DSR 18.9.4
66Supplying fully automatic star delta starter to operate induction motor working on 415V ,3 phase ,50Hz with no Volt coil,Over load element ,ON -OFF push buttons ,with neccesary materials and connected to supply ,etc complete starter with original sheet steel encloser. PHED M1065
67Providing and fixing Chlorinated Polyvinyl chloride (CPVC) pipes ,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings this includes jointing of pipes & fittings with one steps CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of E/I. 25mm dia (dewatering for plants) DSR 18.9
68Supplying Extra deep well handpump complete set with cylinder assembly and connecting rod (12pcs) as per IS : 15500 Part 2 : 2004 PHED M1047
69Supplying all materials labours and equipments for constructing 185 cm dia circular platform as per UNICEF design etc. all complete job as per E/I. PHED 1045
70Supplying all materials labour and equipments for construction PCC 1:2:4 as per UNICEF design etc. All complete as per E/I. PHED 1046
71Carriage of materials Sand
72Stone Chips
73Bricks
74Cement
75Provision of GST @ 18%
76Add 1% Labour Cess Please Enable Macros to View BoQ information `

AI Tender Summary

OUR REF NO 57360072
AUTHORITY Government Departments
TENDER VALUE 21.44 Lakhs
LAST DATE 15-09-2026
Authority
Authority Name Water Resources Department
Work Description Tender for Renovation Of Damin High School, Rajabhita Under Block - Boarijore, District - Godda
Basic Detail
Tender No UNTIED/MID/GODDA/F2-06/2026-27
Bidding Type Tender
Location
City Godda
State Jharkhand
Key Dates
Publish Date 04 Sep 2026
Submission Date 15 Sep 2026
Open Date 16 Sep 2026
Finance
Tender Value 21.44 Lakhs
Tender Fee 5000
EMD 43000
Exemption Not Available
Document List
93970053-a72d-4788-ae35-b6333e6ba61d.html
BOQ_159891.xls
TenderDocument.pdf
Tendernotice_1 (24).pdf
Tendernotice_2 (4).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 04, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 15, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Today
Sep 16, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 1 day

Tender Documents

Download All (ZIP) ↓
html

93970053-a72d-4788-ae35-b6333e6ba61d.html

xls

BOQ_159891.xls

pdf

TenderDocument.pdf

pdf

Tendernotice_1 (24).pdf

pdf

Tendernotice_2 (4).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders