Tender For Construction Of Rwss Sub Division Office Bhadrak Under Rwss Division Bharak
Tender Value
82.71 Lakhs
Estimated cost
Bid Submission
23 Sep 2026
10 days left
EMD
82711
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhadrak → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Rwss Sub Division Office Bhadrak Under Rwss Division Bharak
BOQ
| Sl. No. | Item Description |
| 1 | PART-I) Civil Work:-Dismantling brick or stone masonary in lime or cement mortar including stacking the useful materials for re-use and removing the debris within 50 m. lead from work site etc. complete. |
| 2 | Dismantling and removing Doors,Windows and ventilators and removing the debris within 50 m. lead from work site etc. complete. |
| 3 | Dismantling and removing R.C.C column, beams, slab,staircase , landing , lintels including stacking the useful materials for re-use and removing the debris within 50 m. lead from work site etc. complete. |
| 4 | Foundation excavation in Earth work in hard soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layer not exceeding 0.3m in depth and as per specification approved by the department etc. complete.etc. complete as per direction of Engg-in-Charge . |
| 5 | Filling foundation and plinth with sand and well watered and rammed including cost, conveyance and royalty etc complete as per direction of Engg.-in-Charge. |
| 6 | Cement concrete (1:3:6)with 40mm size CBHG metal including cost, conveyance and royalty etc. complete as per direction of Engg.-in-Charge. |
| 7 | Fly Ash Brick masonry in c.m. 1:6 in F & P including cost,conveyance and royalty of materials curing etc. complete. as per the direction of the Engineer-in-charge. |
| 8 | 1” thick D.P.C with C.C(1:2:4) using 12mm. Chips etc. cpmplete as per direction of Engg-in-Charge . |
| 9 | 1st class Fly Ash brick masonry work in superstructure thoroughly soaked in water, with cement mortar (1:6) including scaffoldings ,racking out joints, curing etc complete as per specification/drawing and as per the direction of the Engineer-in-charge.(a) Ground Floor |
| 10 | Head Room |
| 11 | Providing and Laying reinforcement Cement concrete (M-20) with 20 mm and down graded chips including cost all materials,labours,T & P,curing etc complete (excluding the cost of reinforcement & Centering, shuttering) as per direction of Engineer-in-charge.(a)Pile Cap |
| 12 | Plinth Beam/Tie Beam |
| 13 | Column & Beam |
| 14 | Lintel |
| 15 | Chajjah |
| 16 | Roof Slab |
| 17 | Stair Case |
| 18 | Head Room |
| 19 | Single under reamed pile foundation with RCC M20 using 25mm and down graded size black hard granite (Crusher broken) stone chips including cost of boring but excluding cost of M.S./Tor steel and labour charges for cutting, bending and binding of steel. etc. complete300mm pile - 6.0 mtrs long |
| 20 | Supplying, fitting and placing uncoated HYSD bar reinforcement (SAIL/TATA TISCON/JINDAL PANTHER/SHYAM STEEL) complete in proper position including cost of binding wire 18 to 20 gauge as per direction of Engg.-in-Charge. (a)Ground Floor |
| 21 | Head Room |
| 22 | 12mm cement plaster out side in cement mortar (1:6)including necessary scaffolding curing etc. as per direction of Engg.-in-Charge.(a)round Fllor |
| 23 | Head Room |
| 24 | 20 mm. thick grading plaster in c.m. 1:6 including cost conveyance and royality of materials curing etc. complete as per direction of Engg-in-Charge .(a)Ground Fllor |
| 25 | Head Room |
| 26 | 16mm thick cement plaster inner side in cement mortar (1:6) including necessary scaffolding curing etc. as per direction of Engg.-in-Charge. (a)Ground Floor |
| 27 | Head Room |
| 28 | 6mm.thick cement plaster with C.M(1:4) to RCC surface including closed deep chipping and slury treatment etc. complete as per direction of Engg.-in-Charge. |
| 29 | Wall Priming one coats on new work with wall water bound primer of approved shade as per direction of Engg-in-Charge .(a)Ground Floor |
| 30 | Head Room |
| 31 | Wall painting two coats on new work with Plastic emulsion paint of approved shade etc. complete as per direction of Engg-in-Charge(a) Ground Floor |
| 32 | Head Room |
| 33 | Finishing wall surface of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc. complete as per direction of Engg-in-Charge . |
| 34 | Wall painting two coats on new work with Weather coat paint of approved shade as per direction of Engg.-in-Charge.(Ground Floor) |
| 35 | Head Room |
| 36 | Supplying and fixing of steel M.S. grill with all fitting and fixtures including cost of cutting holes in the brick masonry and R.C.C. columns and making good to damage etc, as per direction of Engineer -in -charge. |
| 37 | Eamel Painting two coats with enamel paint over one coat of primer of approved quality etc. complete as per direction of Engg-in-Charge . |
| 38 | Fixing Floor tiles in floors,treads or steps and landings on 25 mm thick CM (1:1) jointed with neat cement slurry mixed with pigments to match the shades includind cost for rubbing, polishing & cost of marbel tiles etc. complete as per direction of Engg-in-Charge . |
| 39 | Fixing Ceramic Glazed wall tiles in dados skirting and risers of stepson 12 mm thick cement plaster(1:3) jointed with neat cement slurry mixed with pigments to matche shade of the tiles including rubbing and polishing complete as per direction of Engineer-in-charge. |
| 40 | Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100 mm x 37 mm with wall thickness 2 mm (± 0.2 mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos of plastic brackets of size 75 mm x 220 mm at each corner and stainless steel screws, reinforcing the hinge side of style by inserting PVC profile of size 28 mm x 30 mm, with wall thickness 2 mm ( ± 0.2 mm). Lockrail of size 100 mm x 37 mm, wall thickness 2 mm (+ 0.2 mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100 mm x 20 mm, and inserting 2 nos tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturer's specification and direction of Engineer-in-charge. |
| 41 | Supplying,fitting & fixing of stainless steel of 304 grade in Hand Railing using 50mm. Dia of 2mm. thick circular pipe with Balustrade of size 32mm.x32mm.x2mm. @ 0.90m. C/C and stainless square pipe bracing of size 32mm.x32mm.x2mm. In 3 rows in stair case as per approved design and specification,buffing,polishing etc. with cost, conveyance, taxes of all materials labour T & P etc. required for the completion in all respect etc. complete as per direction of Engg-in-Charge . |
| 42 | Fixing colour Vitrified tiles in floors (Printed Series) of size 600mm x600 mm of approved make conforming IS:13755 laid on 20 mm thick cement mortar (1:4)and filling joints with white cement of approved quality including cost of all materials, labour T&P etc rrequired for the work all completeas per direction of Engineer-in-charge. |
| 43 | Fixing Vitrified tiles in dados (Printed Series) skirting and risers of stepson 12 mm thick cement plaster(1:3) jointed with neat cement slurry mixed with pigments to matche shade of the tiles including rubbing and polishing complete as per direction of Engineer-in-charge. |
| 44 | PART-II ) WATER SUPPLY & SANITATION ( PH WORK FOR GROUND FLOOR & 1ST FLOOR ) -Supplying of all materials , labour , T&P for fitting & fixing of ISI marked star labelled single phase submersible 1.00 HP pump & motor set ( KSB/Kirloskar / Crompton/ Texmo/CRI make ) having duty of discharge of 1.00 lps and 40 mtr Head including all accessories etc all complete as per the direction of Engineer-in-charge. |
| 45 | Supplying of all materials , labour , T&P for Providing and fixing Rotational Moulded Polyethylene Cylindrical Vertical water storage tanksconforming to IS:12701-1998 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts , fixing ball valves etc. including hoisting upto a height of 5.00 mtrs above ground level and placing the tank in the required position etc. all complete as per the direction of Engineer-in-charge.1000 Ltrs Rotational Three Layer Cylindrical vertical water storage tank |
| 46 | Supplying of all materials , labour , T&P for construction of parapet wall around the PVC vertical water storage tank on the roof etc all complete as per the direction of Engineer-in charge. |
| 47 | Supplying of all materials , labour , T&P for Providing and fixing to wall or ceiling and floor Chlorinated Polyvinyle Chloride (CPVC) pipes conforming to IS:15778 having thermal stability for hot & cold water supply including all CPVC plain and brass threaded threaded fittings including fixing the pipe with clamps at 1.00 mtr spacing and joining of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.50 mm nominal diameter |
| 48 | 25 mm nominal diameter |
| 49 | 20 mm nominal diameter |
| 50 | Supplying of all materials , labour , T&P for fixing of Brass screw-down Bib cocks (Taps) polished bright conforming to IS:781-1995 of the following nominal sizes as per specification etc all complete as per the direction of Engineer-in-charge.15 mm dia CP long body Bib cock |
| 51 | 15 mm dia CP Swan Neck pillar cock with spout |
| 52 | 15 mm dia CP angular stop cock |
| 53 | Supplying of all materials , labour , T&P for fixing of Brass screw-down stop cocks conforming to IS:781-1995 of the following nominal sizes as per specification etc all complete as per the direction of Engineer-in-charge.20 mm dia CP consealed stop cock |
| 54 | 20 mm dia CP revolving shower with arm(over head) |
| 55 | CP Telephonic shower with CP/PVC Flexible Tube with hook |
| 56 | Supplying of all materials , labour , T&P for fixing of Brass or Gun metal Full way valves conforming to IS:781-1995 of the following nominal sizes as per specification etc all complete as per the direction of Engineer-in-charge.20 mm dia Brass or Gun metal Full way valves |
| 57 | 25 mm dia Brass or Gun metal Full way valves |
| 58 | 50 mm dia Brass or Gun metal Full way valves |
| 59 | Supplying of all materials , labour , T&P for fixing of standard sized chromium plated brass Towel rail complete with chromium plated brass brakets fixed to wooden plugs with chromium plated brass screws etc. as per specification all complete as per the direction of Engineer-in-charge.20 mm dia x 600 mm Chromium plated Brass Towel rail. |
| 60 | Supplying of all materials , labour , T&P for fixing of Liquid soap container - Glass container or plastic container with chromium plated brass lid and brakets fixed to wooden plugs with chromium plated brass screws or Chromium plated brass soap dish complete with chromium plated brass brakets fixed to wooden plugs etc. as per specification all complete as per the direction of Engineer-in-charge.Liquid soap container |
| 61 | CP Soap holder |
| 62 | Supplying of all materials , labour , T&P for fixing of standard sized Glass-Shelf with chromium plated brass brakets and guard rails complete fixed to wooden plugs with chromium plated brass screws etc. as per specification all complete as per the direction of Engineer-in-charge.Fixing of Glass-Shelf |
| 63 | Supplying of all materials , labour , T&P for fixing of Rectangular shaped 1500 x 450 mm mirror of superior glass mounted on 6 mm thick AC sheet or Ply wood sheet and fixed to wooden plugs with chromium plated brass brass screws and washers as per specification all complete as per the direction of Engineer-in-charge.Fixing of 1500 x 450 mm Rectangular mirrror |
| 64 | Supplying of all materials , labour , T&P for fixing on wall face unplasticised Rigid pvc soil, waste and rain water pipes conforming to IS: 13592 Type B , including jointing with seal ring conforming to IS: 5382 , having 10 mm gap for thermal expansion, single socketed pipes etc all complete as per specification etc all complete as per the direction of Engineer-in-charge.(i) 90 mm OD PVC SWR S/S Pipe ( ISI Type - B ) |
| 65 | (ii)110 mm OD PVC SWR S/S Pipe ( ISI Type - B ) |
| 66 | Supplying of all materials , labour , T&P for fixing Wash Hand Basins with hole for pillar taps conforming to IS; 2556: part 4-2004 with cast Iron or MS brakets painted white including cutting holes in walls and making good the damages etc. all complete as per specification and direction of Engineer-in-charge.Porcelain 20\\" x 16\\" ( 550 x 400 mm )Flat back hand wash Basin |
| 67 | Supplying of all materials , labour , T&P for fixing Porcelain standard Padestal Wash Hand Basins complete recessed at the backfor the reception of pipes and fittings etc. all complete as per specification and direction of Engineer-in-charge. Porcelain standard Padestal for Wash Hand Basins |
| 68 | Supplying of all materials , labour , T&P for fixing of Wash down water Closet( European type W C pan ) with integral 'S' or 'P' trap conforming to IS: 2556 : part 8-2004 , to the floor with wooden plugs and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification and direction of Engineer-in-charge.( Seat and cover to be measured and paid separately) Porcelain EWC with 'P' or 'S' Trap |
| 69 | Supplying of all materials , labour , T&P for fixing of Plastic Seat and cover for Wash down water Closet( European type W C pan ) with chromium plated brass hinges and rubber buffers all complete as per specification and direction of Engineer-in-charge.White plastic seat and cover with jet spray |
| 70 | Supplying of all materials , labour , T&P for fixing of PVC low level flushing cistern with manually controlled device ( Handle lever) conforming to IS: 7231, with all fittings and fixtures all complete as per specification and direction of Engineer-in-charge.10 Litres capacity white |
| 71 | Supplying of all materials , labour , T&P for fixing of Porcelain sink ( Cera/Nycer) of 24\\" x 18\\" x 10\\" ( 600 x 450 x 250 mm ) size conforming to IS:2556: Part 5-1994 with cast Iron or MS brakets painted white including cutting holes in walls and making good the damages etc. all complete as per specification and direction of Engineer-in-charge.Porcelain sink ( Cera/Nycer) of 24\\" x 18\\" x 10\\" ( 600 x 450 x 250 mm ) size |
| 72 | Supplying of all materials , labour , T&P for fixing of Porcelain Flat back stall type magnum urinal conforming to IS:2556: Part 6-1996 including connecting the urinal with waste pipe by means of white lead mixed with chopped hempo etc. all complete as per specification and direction of Engineer-in-charge.Porcelain Flat back stall type Magnum Urinal |
| 73 | Supplying of all materials , labour , T&P for cutting holes through brick work including making good the damages in cement mortar (1:6) for taking GI/PVC pipes and fittings etc all complete as per the specification and direction of Engineer-in-charge. 375mm / 250 mm thick wall |
| 74 | CONSTRUCTION OF 1 NOS 20 USERS RCC SEPTIC TANK -Supplying all materials, labour and T&P for construction of inspection chamber as per P.H. specification and design all complete. (size-0.75x0.75x1.20m size) (Annexure-A ) |
| 75 | PART-III :-ELECTRIFICATION:- (GROUND FLOOR) - Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5Amp, 250V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size, MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/HPL) Group-A - Light point |
| 76 | Group-B Light point |
| 77 | Group-B - Fan point |
| 78 | Group-C - Calling Bell point |
| 79 | Supply and fixing of 5 Amp plug with switch on existing board (Piano type/cover including connection etc. as required ) |
| 80 | Supply and fixing of 15/16Amp plug with switch on 75X75X60 mm deep MS board (Piano type/cover including connection etc. as required ) |
| 81 | S/F of computer board consisting 3 nos 5amp switch and 3 nos. of 5 amp socket |
| 82 | S/F of A.C Point consisting of 15 Amp Industrial switch socket and 32 Amp DP Starter with 02 way MCB and Top for connection. (Make:-Cona, Anchor, Havells) |
| 83 | Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required.(Make of wire-Finolex/L&T/Anchor/Havells/V-Guard//HPL) 2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia |
| 84 | 2 X 2.5 sq.mm +1 X 1.5 sq.mm -do- |
| 85 | 2 X 4 sq.mm +1 X 1.5 sq.mm -do- |
| 86 | 2 X 10 sq.mm +1 X 4 sq.mm -do- |
| 87 | Supply and fixing of following way single pole steel MCB distribution board 415V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-(HPL/ Havells/ Legrand /L&T/C&S.) 8 Way Double Door |
| 88 | Supply and fixing of 5Amp to 32A rating 240 V/415 V \\"B\\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make-HPL/ Havells/ Legrand /L&T/C&S) Single pole (SP) |
| 89 | 20 watt LED Tube Light(HAVELLS/Crompton/Bajaj |
| 90 | Supply and fixing of 25/30 W LED street light made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics,IP66 protection,impact resistance of IK07 and 10K external SPD(Make- Havells/Philips/HPL/CG) |
| 91 | S/F of 10 Watt LED Lamp as per direction of Engineer Incharge (Make-Philips, Havells) |
| 92 | Supply and fixing of superior type Ding Dong call bell / buzzer of ISI marked, on 6\\" X 4\\" conforming to IS-2268/1994 and bell push of ISI marked , conforming to IS-1293/ 1988 (make-Cona/ Anchor) |
| 93 | A.C Ceiling fan 48\\" size. (Make-Usha-Striker/Orient PSPO Summer cool Breeze) |
| 94 | Exhaust fan 10\\"/12\\" size. (Make-Havells/Usha/Almonard) |
| 95 | Supply and fixing of Electronic Type fan regulator (Make-Cona/ Anchor/ Usha/Bajaj) |
| 96 | 63 Amp TPN Main Switch( Havels/Anchor) |
| 97 | 63 Amp Bus Bar( L&T/Havels/Anchor) |
| 98 | Supply and Laying of 25 sq. mm. 3.5 cor Al lm Armoured cable (Havels/Poly Cab/Finolex/Nicco) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender