Tender For Ichp-Replacement Of Old, Rusted And Damaged Power Junction Boxes And Control Junction Boxes Of Stacker-I & Ii, Reclaimer-I & Ii Machines And 2 Nos. Tail End Control Junction Boxes At Conveyor-49 & 54 With A Newly Fabricated Power Junction
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Sep 2026
3 days left
EMD
3600
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tuticorin → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Ichp-Replacement Of Old, Rusted And Damaged Power Junction Boxes And Control Junction Boxes Of Stacker-I & Ii, Reclaimer-I & Ii Machines And 2 Nos. Tail End Control Junction Boxes At Conveyor-49 & 54 With A Newly Fabricated Power Junction Boxes And Control Junction Boxes Including De-Glanding And De-Termination Of Power And Control Cables And Re-Glanding And Re-Termination Of The Same.
BOQ
| Sl. No. | Item Description |
| 1 | Charges for de glanding, de termination & removal of old junction boxes : H.T Power cables XLPE (3 X 3 1/2 X 90 Sq.mm) |
| 2 | Charges for de glanding, de termination & removal of old junction boxes : Control cables (19C X 2.5 Sq.mm) |
| 3 | Removal of Junction Boxes : Removing the existing Power & Control junction boxes and extension boxes, cable de termination from the boxes, removal of support channel, angle, bolts & nuts in various location of conveyor 49 & 54 walkway and then transporting manually from coal yard to pocket store. (4Nos power junction boxes ,4Nos control junction boxes and 2Nos tail end control junction boxes = total 10 nos) |
| 4 | POWER JUNCTION BOX OF SIZE 1000MM X 1200 MM X 400 MM: Charges for Fabrication of sheet enclosure of size 1000mm X 1200 mm X 400 mm made of 16SWG CRCA sheet , making proper entry for incoming and out going cables, front side opening with single door arrangements with lock and key, rubber beading for door, painting, fabrication and fixing of copper flat bus bars, GI flat earth bar and epoxy insulators, including materials and labour, T&P lead & lifts etc. Cost of sheet enclosure of size 1000mm X 1200 mm X 400 mm 16SWG CRCA sheet required |
| 5 | -do- Charges for fabrication of sheet enclosure of size 1000mm X 1200 mm X 400 mm |
| 6 | -do- Charges for painting of MS sheet enclosure of size 1000mm X 1200 mm X 400 mm with one Coat of Red oxide and two coat of enamel grey paint on both sides including cost of paint, labour consumables. |
| 7 | -do- Charges for Erection of sheet enclosure. |
| 8 | Charges for Fabricating of and fixing of copper flat bus bars of 3nos provided with required 3mm dia hole 3nos in each flat, GI flat earth bar provided with 13mm dia hole 4nos. |
| 9 | CONTROL JUNCTION BOX : Charges for Fabrication of sheet enclosure of size 540 mm X 300mm X 190mm made of 16SWG CRCA sheet, support channel for fixing terminal blocks, making proper entry for incoming and out going cables, front side opening with single door arrangements with lock and key ,rubber beading for door ,painting, including accessories and labours, T&P leads & lifts etc. Cost of Sheet enclosure of size 540 mm X 300mm X 190mm 16SWG CRCA sheet required. |
| 10 | -do- Charges for fabrication of sheet enclosure of size 540 mm X 300mm X 190mm |
| 11 | Charges for painting of CRCA sheet enclosure of size 540mm X 300mm X 190mm with one coat of red oxide and two coat of enamel grey paint on both sides including cost of paint, labour, consumables. |
| 12 | Charges for Erection of sheet enclosure of size 540 mm X 300mm X 190mm 16SWG CRCA sheet required. |
| 13 | Tail End control junction box 500mm X 650mm X 190mm: Charges for fabrication of sheet enclosure of size 500mm X 650mm X 190mm made of 165WG CRCA sheet, support channel for fixing terminal blocks, making proper entry for incoming and out going cables, front side opening with single door arrangements with lock and key rubber beading for door, painting, including accessories and labours, T&P leads & lifts etc., Cost of Sheet enclosure of size : 500mm X 650mm X 190mm. 16 SWG CRCA sheet required: |
| 14 | Charges for fabrication of sheet enclosure of size 500mm X 650mm X 190mm. |
| 15 | Charges for painting of CRCA sheet enclosure size 540mm X 300mm X 190mm with one coat of red oxide and two coat of enamel grey paint on both sides including cost of paint, labour, consumables. |
| 16 | Charges for Erection of sheet size 500mm X 650mm X 190mm. |
| 17 | Removing and relaying of power and control aluminium armoured cables of a length 300mtrs each in Stacker I&II and Reclaimer I&II machines in a proper manner as not getting damage by swaying of belt. Special Type H.T power aluminium armoured cables of size 3 X 3 1/2 X 90Sq.mm. |
| 18 | -do- Charges for Control cables size 19 X 2.5Sq.mm. |
| 19 | Re glanding and Re termination of Power & Control cables:- HT. Power cables XLPE (3 X 3 1/2 X 90 Sq.mm). |
| 20 | Re glanding and re termination of Control cables (19 X 2.5 Sq.mm). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender