Tender For Repairs To Plumbing, Joinery, Flooring, Manhole, Drain, Concertina Coil & Misc Works At Dhq-7, Cgra Complex And New Trade Centre At Paradip Under Ge (I) (Cg) Bhubaneswar
Tender Value
40 Lakhs
Estimated cost
Bid Submission
26 Sep 2026
20 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kendrapara → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Plumbing, Joinery, Flooring, Manhole, Drain, Concertina Coil & Misc Works At Dhq-7, Cgra Complex And New Trade Centre At Paradip Under Ge (I) (Cg) Bhubaneswar
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame not exceeding 1.50 Sq.m each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 2 | Taking down chowkats or frame exceeding 1.50 Sq.m and n exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 3 | Taking down shutters only exe 1 Sqm but n exc 2 sqm each including iron mongery |
| 4 | Supply and fixing Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour sheet reinforced with M.S square tube supplying & fixing in opening as per specification & drawing complete, all as specified and as directed. |
| 5 | Supply and fixing factory made solid panel PVC door shutter 30 mm thick(style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width struck inside with solvent cement for styles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,panelling of plain colour PVC sheet to be fitted in the styles &rails with suitable PVC sheet beading and joined together with solvent cement.fixed in the frame at site complete, all as specified and as directed. |
| 6 | Supply and fixing in repair 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint. |
| 7 | Supply and fixing in repair of 40 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete, all as specified and as directed. |
| 8 | Supply and fixing in repair of 35 mm thick Skeleton 2nd class hardwood,open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and itred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I complete, all as specified and as directed. |
| 9 | Cutting holes exc. half brick but not exc one brick in brick walls built in CM or cement lime mortar & stone walls built in lime mortar for inserting holdfasts & making good dismantled portion in CM(1:3) or PCC(1:2:4) Type B-1 as required |
| 10 | S & F mild steel flat iron as in hold fast clamps articles conforming to Fe-290 gde E-165 all as directed. |
| 11 | Supply and fixing stainless steel Butt hinges 100mm size fixed to PVC framescomplete, all as specified and as directed. |
| 12 | Taking down and Refixing as in same opening,Shutters of any description exc 1 sq. m and n exc 2 Sqm each complete. |
| 13 | Supply and fixing butt hinges 125mm size medium weight, cold rolled mild steel, and fixed to wooden frames complete, all as specified and as directed. |
| 14 | Supply and fixing 100mm size aluminum handles, cast type anodised complete, all as specified and as directed. |
| 15 | Supply and fixing 150mm size aluminum handles, cast type anodised complete, all as specified and as directed. |
| 16 | Supply and fixing Aluminum anodized barrel tower bolt of extruded section 150mm long complete, all as specified and as directed. |
| 17 | Supply and fixing Aluminum anodized barrel tower bolt of extruded section 200mm long complete, all as specified and as directed. |
| 18 | Supply and fixing aluminum alloy, anodized, sliding door bolt of length 200mm with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete, all as specified and as directed. |
| 19 | Supply and fixing aluminum alloy, anodized, sliding door bolt of length 300mm with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy. |
| 20 | Supply and fixing in repair MS double action spring hinge,125mm size with steel wire spring ,stove enamelled black fixed to metal door frame by welding complete, all as specified and as directed. |
| 21 | Taking dowm old US hydraulically regulated door closer complete all as specified |
| 22 | Supply and fixing in repair door closer hydraulically regulated designation No 3 universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg complete, all as specified and as directed. |
| 23 | Supply and fixing in Aluminium power coated fancy type aluminium curtain rod 25mm dia incl PVC rungs @100mm C/C wutg including globe type brackets matching to curtain rod complete, all as specified and as directed. MARVEL brand (legend series) manufactured by M/S Accumax interior products Pvt Ltd mumbai or equivalent as approved.including taking down of old curtain rod . |
| 24 | Supply and fixing powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. (minimum thickness of powder coating 50 micron complete all as specified complete all as specified and directed. (Note- Glass shall be measured and paid separately) |
| 25 | Supply and fixing powder coated anodised aluminium window and ventilator shutters, fixed, openable/ sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete, all as specified and as directed. (Note- Glass shall be measured and paid separately) |
| 26 | Supply and fixing aluminum anodized grill DG 202 powder coated of 10 mm dia rod square , rectangular, circular or similar type of shape, aperture not exc 5 cm in length or width fixed with `H’ or `F’ channel 38 mm x 12 mm x 1.30 mm (Sec No 8778) Make Grill No 20 of DECOREL or equivalent complete, all as specified and as directed. |
| 27 | Supply and fixing 4.8mm thick Sheet glass, ordinary quality and glazing with oil putty/beads in square exc 0.5 sq. m in eachpane fixed to aluminum framing complete all as specified as directed. |
| 28 | Supply and fixing 4.8mm thick Sheet glass, ordinary quality and glazing in square not exc 0.5 sq. m in eachpane fixed to aluminum framing complete all as specified as directed. |
| 29 | Supply and fixing in repair Figured glass 5mm thick, , pin head type and glazing in squares n exc 0.5 sq. m in each pane complete, all as specified and as directed. |
| 30 | Supply and fixing Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete, all as specified and as directed. |
| 31 | Supply and fixing in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete, all as specified and as directed. |
| 32 | Supply and fixing in repair 140mm long Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor complete all as specified. |
| 33 | Supply and fixing standard aluminium door seal of 0.9 to 1.2 mtr length each with nylon brush at lower side to fit at bottom of door with screws complete all as specified. |
| 34 | Taking down and refixing aluminium window shutters and making unworkable shutters workable (which incls replacing roller,rubber beading etc) complete all as specified and directed. |
| 35 | M&L for preparation of old steel surfaces of any description exe 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer. |
| 36 | Material and labour preparation of old plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. . |
| 37 | M&L for preparation of old wooden surfaces of any description exe 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 38 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified. |
| 39 | Demolition of Concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete, all as specified and as directed. |
| 40 | Material and labour 25mm thick plain cement concrete type B-0, 1:2:4 (using 12.5mm graded aggregate) as in floor and finishing cement concrete surface even and smooth without using extra cement complete all as specified |
| 41 | Material and labour Vitrified Ceramic tiles 10 mm thick dark shade (square/ rectangular) polished, area of each tilesnot exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick rendering in cement mortar (1:6) complete. |
| 42 | Material and labour Vitrified Ceramic tiles 10 mm thick dark shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar (1:4) complete, all as specified and as directed. |
| 43 | Material and labour Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over 15mm thick rendering in cement mortar (1:6) complete, all as specified and as directed. |
| 44 | Material and labour glazed ceramic coloured tiles of size 300x450mmx7mm thick on vertical surfcaes such as skirtings,dados and riser to steps ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick rendering in cement mortar(1:4) complete, all as specified and as directed. |
| 45 | Material and labour 20mm thick Granite (of any type) machine cut, in skirting, dado, riser, cooking platform,floor etc laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 10mm thick rendering in cement mortar(1:4) complete. |
| 46 | Material and labour Chamfer, splays or arris in facework of Granite/ marble n. exc 15mm wide complete all as specified and as directed. |
| 47 | Taking up or down steel tubing and connections, including cleaning for re fixing or removal to store complete all as specified. |
| 48 | (a) 15 mm bore |
| 49 | (b) 20 mm bore |
| 50 | (c) 25 to 32 mm bore |
| 51 | Supply and fixing in repair GI tubes, 'midium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors |
| 52 | (a) 15 mm bore |
| 53 | (b) 20 mm bore |
| 54 | (c) 25 mm bore |
| 55 | (d) 32 mm bore |
| 56 | Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n, exc. 10cm girth. |
| 57 | Supply and fixing in repair in 15 mm bore fancy type, chromium plated with long shank and cup (concealed type) stop valve cast copper alloy screwed down, high pressure, screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 58 | Supply and fixing in repair bib taps cast CP 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule. |
| 59 | Supply and fixing in repair 15mm bore piller taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts. |
| 60 | Supply and fixing PVC connection 15mm size PTMT nuts of length 600mm. |
| 61 | Supply and fixing in repair Brass chromium plated shower rose 125mm size complete all as specified. |
| 62 | Supply and fixing in repair shower rose of continental series, Make : Jaquar ( CAT No. OHS – 1709 with sower arm CAT No. SHA-477) or equivalent as approved |
| 63 | Supply and fixing in repair wall mixer and provision for overhead shower with 115mm Long Bend Pipe on upper side, connecting legs & wall flanges complete, all as specified and as directed. .Make : Jaquar (FUS-29273UPR) or equilavent as approved |
| 64 | Supply and fixing in repair Hand shower health faucet with wall 8mm dia, 1.2 mtr long flexible tube & wall hook for EWC including hinges with complete fitting. Make : Jaquar (ALD-573) or equivalent as approved. |
| 65 | Supply and fixing in repair under counter square type wash hand basin complete, all as specified and as directed. Make : Jaquar (ONS-WHT-10901) or equilavent as approved |
| 66 | Supply and fixing in repair rimless, Blind Installation Wall Hung WC with UF soft close slim seat cover, Hinges, Accessories Set, , complete all as specified and directed. Make : Jaquar (ONS-WHT-10953BIUFSM) or equilavent as approved. |
| 67 | Supply and fixing in repair Plastic water closet seat, white, closed pattern with flat bottom, & cover & mild steel CP or aluminised hinging device |
| 68 | Supply and fixing in repair 10 litre capacity PVC valveless, syphonic action type low level flushing cistern in repair with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete (With brackets). Make:- Hindware, Parryware, Commander (Slim Line) or equilavent as approved. |
| 69 | Supply and fixing in repair vitreous China wash basin white, flat back,size 550X400 mm including cutting for pinning in ends of brackets, complete. (Make:-HINDWARE or equilavent as approved) |
| 70 | Supply and fixing in repair in repair 600X450 mm bevelled edge mirror of selected quality glass, mounted of 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup. |
| 71 | Supply and fixing in repair for flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern |
| 72 | Supply and fixing in repair 32 mm bore dia of discharge pipe waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms) |
| 73 | Supply and fixing in repair 40 mm bore dia of discharge pipe waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms) |
| 74 | Supply and fixing in repair 32 mm bore dia of Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm as discharge pipe complete all as specified. |
| 75 | Supply and fixing in repair 40 mm bore dia of Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm as discharge pipe complete all as specified. |
| 76 | Supply and fixing in repair SS Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified. |
| 77 | Supply and fixing in repair Towel Ring of Stainless steel fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified. |
| 78 | Material and labour for cutting and uprooting of tree roots and unwanted vegetation on roof and wall surfaces by digging safely in concrete roof or brick wall and pouring acid or approved chemical to avoid further growth of roots and making good the surfaces by filling cracks and disturbed portion in cement mortar (1:3) or Plain Cement Conrete 1:2:4 type B-0 (using 12.5mm size crushed stone aggregate) without using extra cement, complete up to 4 th floor complete all as specified and directed.. |
| 79 | Dismantling water tanks of exc 500 not exc 1000 lter capacity |
| 80 | Supply and fixing 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) and fixed in position all as specified in SSR Part I complete, all as specified and as directed. |
| 81 | Supply and fixing in repair 20mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete, all as specified and as directed. |
| 82 | Supply and fixing in repair 40mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete, all as specified and as directed. |
| 83 | Dismantling wrought iron and mild steel work of any descreption not other wise provided for complete, all as specified and as directed. |
| 84 | Supply and fixing Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410-W(Gde E- 250) quality A |
| 85 | Material and labour preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide complete, all as specified and as directed. |
| 86 | S&F in repair Side Single Lever Sink Mixer with Swinging Spout (Table Mounted) with 450mm Long Braided Hoses (Make : Jaquar, FLR-5179B or equilavent as approved ) fixed complete all as specified and directed. |
| 87 | Demolition of brick work built in cement mortarof any description |
| 88 | Material and labour for brickwork with modular flyash bricks , straight or curved on plan exc 6m mean radius, built in CM 1:6 complete, all as specified and as directed. |
| 89 | Material and labour brickwork with modular fly ash bricks ,straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete, all as specified and as directed. |
| 90 | Taking down cement plaster/terrzo toping of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc. |
| 91 | Rendering 15 mm thick cement plaster in CM 1:4 on other than fair faces of brick Work including finished even and smooth without using extra cement. |
| 92 | Rendering 10 mm thick cement plaster in CM 1:6 on other than fair faces of brick Work including finished even and smooth without using extra cement. |
| 93 | Supply only integral water proofing compound for plastering / concrete work, complete all as specified. |
| 94 | Material and labour 5 mm rendering in cement mortar (1:3) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement. |
| 95 | Material and labour preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed. . |
| 96 | Material and labour preparation of newly plastered surfaces of wall and applying two coats of oil emulsion distember over a coat of alkali resistant priming paint & smooth surface over a coat of primer paint over a coat of 1mm thick exterior wall putty over new surfaces complete , all as specified and as directed. |
| 97 | Material & Labour for new surfaces of wall applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over a coat of 1mm thick exterior wall putty over new surfaces complete, all as specified and as directed. |
| 98 | S&F in repair for sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm→ |
| 99 | S&F in repair for sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm. |
| 100 | Cleaning water tank exc 500ltr n exc 1000ltr capacity and removing all scale and dirt, etc from tank and from mouths of circulating pipes,and ete. |
| 101 | Material and labour synthetic enamel paint (colour approved by Engr-in-Charge) for Writing letters or figures or stops,commas,short lines, dashes , hypens, brackets (Block.Roman, Italic or Indian) n exc. 15 cm high , complete all as specified and as directed. |
| 102 | Supply and fixing in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including trap set and including concrete. |
| 103 | Supply and fixing in repair 15mm bore piller taps,bib tap ,stope cock CP Spindal cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts. Make Jaquar,Silver shain,shakti or equilavent as approved. |
| 104 | S&F Jaquar WC Area 2 Way Bib Tap Alive ALI-CHR-85041 - Chrome or equilavent as approved, complete all as specified and as directed |
| 105 | S&F Jaquar Essco Brass Chrome Finish 2 Way Angular Stop Cock with Wall Flange, APR-101067 or equilavent as approved, complete all as specified and as directed |
| 106 | Supply and fixing Rimless Single Piece WC with UF soft close slim seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern Fittings, Size: 385x720x715 mm, complete all as specified and directed. Make : Jaquar (ONS-WHT-10853S300UFSM or equilavent as approved. |
| 107 | S & F in repairs vitreous china urinal with sensor of size (485 x 310 x710) mm with spreader and other fittings complete with all acessories complete all as specified and directed. Model No URS-WHT 13255 Make : Jaquar or equivalent in make mentioned in Appendix 'A' to PS. |
| 108 | S&F for JAQUAR Florentine Prime Series Table Mounted Tall Boy HOT and Cold Basin Mixer (Chrome) | TOP Lever, Brass Body Water Tap/Faucet/Cock for Bathroom/Kitchen Wash Basin | FLP-CHR-5005BPM or equilavent as approved. |
| 109 | S&F for stainless steel Connection pipe for Hot and cold water for geyser 15-20 mm dia and 60 cm long , complete all as specified and as dirtected, |
| 110 | S&F for long body bib tap with wall flange (Jaquar COP-CHR-107NPM or equilavent as approved ) complete all as specified and as dirtected, |
| 111 | Material & labour for preparation of old distempered surfaces of wall by washing, rubbing down, stopping including brooming down smoke soot, moulds, moss and efflorescent salts and trading oil greasy spots and applying one coat of oil bound distemper complete incl putty work whever required all as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysSep 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender