Tender For Provn Of Shed Transient At Main Gate, Security Boundary Wall And Interlocking Tiles To Bldg No P-45 (Offrs Mess), Dual Purpose Veh Parking Shed (03 X Vehs) Near Sag Project (Volly Vall And Basket Court) And Veh Parking Shed (03 X Light Veh
Tender Value
27.07 Lakhs
Estimated cost
Bid Submission
03 Oct 2026
0 days left
EMD
54140
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Panchkula → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Shed Transient At Main Gate, Security Boundary Wall And Interlocking Tiles To Bldg No P-45 (Offrs Mess), Dual Purpose Veh Parking Shed (03 X Vehs) Near Sag Project (Volly Vall And Basket Court) And Veh Parking Shed (03 X Light Vehs) To Offrs Residence At Mil Stn Kalka Under Ge (I) Jutogh
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 26-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exc. 1.50m wide and not exc. 1.50m depth for foundation, etc or for manholes/sewage lines etc, n.exc 10 sqm on plan and getting out in hard/dense soil, complete all as specified and directed. |
| 2 | M&L for PCC 1:4:8, Nominal mix, using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. |
| 3 | M&L for brick work with sub class 'B' bricks, straight or curved on plan exc. 6 m mean radius, built in CM 1:4, complete all as specified and directed. |
| 4 | M&L for 15mm thick Cement plaster 1:6 on other than fair faces of brick work or concrete Surafce finished fair and even without using extra cement complete all as specified and directed. |
| 5 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and smooth on walls in CM 1:4, using water proofing compound, complete all as specified and directed.Note: WPC Shall be measured and paid for separately. |
| 6 | M&L for preparation of newly plastered wall surfaces and applying two coats of OBD over 1-2mm (av-1.5mm) thick wall care putty to achieve smooth and even surfaces, complete all as specified and directed. |
| 7 | M&L for preperation of newly plastered wall surfaces and applying two coats of Acrylic smooth exterior weather coat paint of required shade, New work applied @1.67ltr/10 sqm over and including priming coatof exterior primer applied @ 2.2kg/10Sqm), complete all as specified and directed. |
| 8 | S&F pre-painted galvaLume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 9 | S&F angle iron as in posts and struts for fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting etc and similar work conforming to Fe-290, Gde-E-165, complete all as specified and directed. |
| 10 | S&F Fe-290 (Gde E-165) plates (plain or chequered) channels, squarew cut or notched (ordinery and counter sunk) forming holes, without any attachment complete all as specified and directed. |
| 11 | S&F 12mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n.exc 10cm long, complete all as specified and directed. |
| 12 | S&F Mild steel TMT bar 10mm dia & over, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed. |
| 13 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, n. exc. 200mm thick (Horizontal or sloping), complete all as specified and directed. |
| 14 | M&L for reinforced cement concrete 1:2:4, Type B-1, using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed |
| 15 | M&Lfor 25mm thick PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in floor complete all as specified and directed. |
| 16 | M&L for machine cut Kota stone slab flooring 18-20mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 17 | M&L for kota stone slab 16-18mm thick in riser of steps, skirting, dado and pillar laid over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 10mm thick backing coat plater with CM 1:4, complete all as specified and directed. |
| 18 | Surface excavation n. exc. 30cm deep and averaging 15cm deep and getting out in soft/loose soil , complete all as specified and directed. |
| 19 | M&L for Hard core, using broken stone boulders to gauge n. exc. 63 mm, complete all as specified and directed |
| 20 | M&L for 100 mm thick, cement concrete 1:4:8, type D-2, using 40 mm graded crushed stone aggregate as in sub base, complete all as specified and directed. |
| 21 | M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed. |
| 22 | M&L for 75mm thick, cement concrete 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in plinth protection, complete all as specified and directed. |
| 23 | S&F steel window of profile rectangular tube section with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed. |
| 24 | S&F steel windows of profile rectangular tube section with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with out glazing bars, dovetailed or welded, complete all as specified and directed. |
| 25 | S&F steel windows or ventilators, fixed type, with glazing bars, complete all as specified and directed. |
| 26 | S&F for Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balusters; walk ways; railings; and similar work conforming to Fe-290, Gde-E-165, complete all as specified and directed. |
| 27 | S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane, complete all as specified and directed. |
| 28 | S&F pressed steel frames of size 125 x 60 mm for doors with one or more rebates including supply & fixing lugs,125 mm size MS hinges, lock strike plate, etc., complete all as specified and directed. |
| 29 | M&L for PCC 1:3:6, type C-1, using 20mm graded mechanically crushed stone aggregate as in filling pressed steel frame /hold fast blocks etc complete all as specified and directed. |
| 30 | S&F 35mm thick flush shutter, solid core construction with block board core and plywood face panels, both faces are covered with decorative face veneer with lipping/ frame to match, complete all as specified and directed. |
| 31 | S&F 35 mm thick factory made glazed & Skelton shutter of IInd class H/Wood open rebated & prepared to receive glass or gauze etc. without sash bar open rebated with edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass or guage etc size of stiles rails etc as specified in sec 8 clause 8.24 (a) of SSR Part-I (2010), complete all as specified and directed. |
| 32 | M&L for preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coat of syntheatic enammel paint over one coat of pink primer, complete all as specified and directed. |
| 33 | M&L for preparation of new or previously untreated steel surfaces of any descirption not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint incl one coat of red oxide, complete all as specified and directed. |
| 34 | S&F 150mm size aluminum handle fabricated, 'D' type, anodized ISI marked complete all as specified and directed. |
| 35 | S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed. |
| 36 | S&F 200 mm aluminium anodized, barrel tower bolts of extruded section, complete all as specified and directed. |
| 37 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplesor MS beads size 2mm to 3mm, complete all as specified and directed. |
| 38 | S&F 300 mm MS ordinary rat tail rod pattern springs incl roller and roller plate fixed to wooden chowkhats or welded to angle iron door frames, complete all as specified and directed. |
| 39 | S&F GI frame work for ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 & 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section(not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre. size of grid 605mmx605mm incl Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long, complete all as specified and directed. |
| 40 | M&L for 4mm thick non asbestos fibre cement building boards white/off white (E board designer) fixed or laid /inserted to timber/ GI/ Aluminium frame work with screws in ceiling flat or sloping, complete all as specified and directed. |
| 41 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil, complete all as specified and directed. |
| 42 | Removing excavated material n exc.50m and deposited where directed at a level n exc 1.5 m above the starting point in soils, complete all as specified and directed. |
| 43 | S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing Fe-290, (Gde-E-165), complete all as specified and directed. |
| 44 | M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in coping and the like including weathering, slightly rounded or chamferred angles ana throatoing, user of formwork straight or curved, complete all as specified and directed. |
| 45 | M&L for Hard core of gauge n. exc. 63mm, deposited spread level and layers n exc 15 cm thick, watered and rammed true surface, complete all as specified and directed |
| 46 | Excavation in post holes n.exc. 0.5 Cum and getting out in Soft/loose soil, complete all as specified and directed. |
| 47 | Excavating in trenches, n. exc. 1.5m wide and n. exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc., n. exc. 10 sqm on plan and n exc 1.5m in depth and getting out for soft soil, complete all as specified and directed. |
| 48 | M&L for steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I S 1161 -1979 grade St -240, complete all as specified and directed. |
| 49 | Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but exc 10 cm and not exc 15 cm long with Dia of neck 11-15 mm, complete all as specified and directed. |
| 50 | M&L for brickwork with old size sub class `B' bricks, straight or curved on plan exc. 6 mtr mean radius, built in cement mortar 1:4 complete all as specified and directed. |
| 51 | M&L for preparing new plastered surfaces of walls with two coats cement base paint on wallls over a coat of alkali resistant paint complete all as specified and directed. |
| 52 | Supply only Integral water proofing compound, complete all as specified and directed. |
| 53 | M&L for point wiring with 1.5 Sqmm (nominal area), PVC insulated,FRLS multistranded, single core unsheathed, copper conductor cables drawn through and including new PVC rigid conduit with all accessories concealled in wall and fixed to ceiling etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed,multi stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth dolly including sunken boxes of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of brass screws for mounting switches, sockets, regulators etc complete for one light/ fan/ bell point controlled by one, one way switch all as specified and directed. |
| 54 | All as per Srl item No 53.00 above but for one 3 pin socket outlet 5 amps independent board with cable 1.5 Sqmm size, complete all as specified and directed. |
| 55 | All as per Srl item No 53.00 above but for one 3 pin socket outlet 5 amps on the same board with other switches with cable 1.5 Sqmm size, complete all as specified and directed. |
| 56 | All as per Srl item No 53.00 above but for one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 2.5 Sqmm PVC insulated,stranded,unsheated copper conductor on independednt board with continuous earth wire of size 2.5 Sqmm green colours PVC insulated, unsheathed,stranded copper conductor cable, complete all as specified and directed. |
| 57 | S&F Switch piano flush type 5 amps, single pole one way, white in colour, duly ISI marked complete all as specified and directed. |
| 58 | S&F Switch piano flush type 15 amps, single pole one way, white in colour, duly ISI marked complete all as specified and directed. |
| 59 | S&F Socket outlet 2 in 1, 5 pin, 5 Amps, white in colour, duly ISI marked complete all as specified and directed. |
| 60 | S&F Socket outlet, UNI, 2 in one 15 Amps, white in colour, duly ISI marked complete all as specified and directed. |
| 61 | S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed. |
| 62 | S&F rotary Stepped type electronic fan regulator for ceiling fan 1200/1400mm size, 240 volts, 6 Amps, 100W, white in colour, duly ISI marked, complete all as specified and directed. |
| 63 | Supply and fixing LED luminaire 600x600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed. |
| 64 | S&F 20W, 6500 K, 4 feet LED Square tube light fitting, energy efficient fixed to wall/ ceiling etc., complete all as specified and directed. |
| 65 | S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/ 66 protection, complete all as specified and directed. |
| 66 | S&F exhaust fan heavy duty with louvers complete of sweep size 300mm, 900 RPM, single phase, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection, complete all as specified and directed. |
| 67 | S&F ceiling fan 1200mm sweep, AC single phase 230 Volts 50Hz, at Bldgs upto 5 mtrs height, including provision of flexible cable 3 core copper conductor of size 23/0.0076 of suitable length from ceiling rose to ceiling fan upto 1.5 mtr for giving connection and all hanging arrangement i.e. standard down rod, hanging clamp, with rubber real nuts bolts, spring washers and locking of splite pin, plastic canopy with screw compete without fan regulator and marking of MES nos with black synthetic enameled paint, complete all as specified and directed. |
| 68 | S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet,powder coated, SPN DB with 200 Amps rated bus bar, 8 way, IP-42 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCBs duly cocealled in wall, factory made, including making good distrubbed surfaces with matching colour, complete all as specified and directed. |
| 69 | S&F MCB SPN, 40 Amps, 240 volts, \\"B\\" series, 10KA duly ISI marked, complete all as specified and directed. |
| 70 | S&F MCB SP, 6A-32 Amps, 240 volts, \\"B\\" series, 10KA duly ISI marked, complete all as specified and directed. |
| 71 | Supplying, laying, jointing and testing XLPE insulated, armoured, electric cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 10 sqmm 2 core confirming to IS:7098-1985 laid in trenches, in floor, in duct, through pipes or along the pole, complete all as specified and directed. |
| 72 | M&L for dry and clean fine sand for cable cushioning to underground cable protection, , complete all as specified and directed.Note- i) Excavation and earth work measured separately.ii) Punned down thickness shall be measured. |
| 73 | S&F cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable, complete all as specified and directed. Note: Excavation and earth work measured separately. |
| 74 | S&F Mild steel galvanised pipe, light grade, 50 mm nominal bore for passing of cable, fixed to poles/ walls, laid under floor/ road crossings, complete with and including clamps socket & elbow etc., complete all as specified and directed. |
| 75 | M&L for earthing complete with galvanized steel plate elecrode of size 60x60cmx6mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts, nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shallbe provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate. The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete 1:2:4, type B-1, using 20mm graded crushed stone aggregate and MS angle iron 50x50x6mm frame including two coats of painting over a red oxide to exposed steel surfaces. excavation in soft/ loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No - 3 of SSR Part-1 (2009), complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 26, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 03, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayOct 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender