Tender For Addition/ Alteration & Special Repair To Internal Road Within Alkapuri Residential Complex (316 Sqm Beside Block P-324, P-326 & P-327, 504 Sqm Beside Blocks P-364, P-362, P-359 & P-356 And 60 Sqm Of Road Near P-303 Of Cqa (Sv) , Dehu Road.
Tender Value
20.68 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
15 days left
EMD
41400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition/ Alteration & Special Repair To Internal Road Within Alkapuri Residential Complex (316 Sqm Beside Block P-324, P-326 & P-327, 504 Sqm Beside Blocks P-364, P-362, P-359 & P-356 And 60 Sqm Of Road Near P-303 Of Cqa (Sv) , Dehu Road.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation over areas n.exc. 1.5 m deep and getting out in soft/ disintegrated rock complete all as specified and directed. |
| 2 | Rolling and consolidating formation surfaces with power roller exc. 8 tonne but n. exc. 12 tonne including watering, consolidating to the required level, gradient, camber etc. in cutting, filling in hollows and depressions in the process complete all as specified and as directed. |
| 3 | M&L for Moorum/red bajri filling in floor pavings, in road side berms laid in layers not exc 15 cm (150mm) thick, spred, levelled and rammed including rolled and consolidated to required gradient and camber incl watering with power roller complete all as specified and as directed by Engineer-In-Charge. |
| 4 | Removing excavated material (soil) n.exc. 50 m and depositing at a level n.exc. 1.5 m above the starting point complete all as specified and directed. |
| 5 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm and Exc 50 mm and n exc 100 mm deep |
| 6 | M & L for Laying and compacting 150 mm thick (compacted thickness) Granular Sub Base Course (GSB) grading as per Grade I as specified Table 400-1 of MaRTH specifications for Road and Bridge works, 2013, in a single layer over compacted subgrade with nature sand, crushed gravel, crushed stone, crushed slag or combination thereof as per the grading required The materials are mechanically mixed, spread and leveling on the subgrade by using motor grader of adequate capacity, and rolling with vibratory roller of capacity 80-1 00 KN static weight for achieving required compaction density of atleast 98% of the Maximum Dry Density. Consolidating to required gradient and camber complete all as specified and directed with finished surface tolerances as per Table 900-1 of MaRTH specifications for Road and Bridge works, 2013c complete all as specified and as directed by Engineer-In-Charge. |
| 7 | M&L for Laying and compacting 150 mm thick (compacted thickness) Wet Mix Macadam (WMM) grading as pe table 400-13 of MaRTH specifications for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with wate to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-1 OOKN static weight and consolidating to required gradien and camber complete all as specified and directed The finished surface tolerances to be as per Table 900-1 of MaRTH specifications for Road and Bridge works 2013 complete all as specified and as directed by Engineer-In-Charge. |
| 8 | Preparing WMM surface by brushing with wire brushes for removing caked mud etc sweeping with broom and finally fanning the cleaned cleaned surface with gunny bags to remove all loose dirt etc by cleaning the WBM/WMM surface with power compressor and applying evenly priming/tack coat with bituminous primer of VG-10 grade paving bitumen @ 7.5 kg/X Sqm complete all as specified and as directed by Engineer-In-Charge. |
| 9 | M&L for preparing ;unsurfaced Black top surface by brushing with wire brushes for removing cracked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with VG-30 grade bitumen bituminous primer (paving bitumen) at the rate of 5.00 Kg per 10 Sqm. |
| 10 | M&L for premixed bituminous macadam using paving bitumen @ 4% by weight of total mix, spread rolled and compacted to required gradient and camber for up to 75mm consolidated thickness all as specified and directed. |
| 11 | Applying evenly a priming/tack coat of paving bitumen with bituminous primer at 2.5 Kg per 10 Sqm on BM surfaces |
| 12 | M & L for Bituminous premix asphaltic dense concrete 40 mm consolidated thickness with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient complete |
| 13 | M & L for Marking preparation bitumen surface of road and marking 2.5mm thick center line stop lines, dashes, arrows etc and the like n exc 10 cm wide on road payment with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. |
| 14 | M & L for with approved moorum, red bajri in road side berms as light wearing surfaces 100 mm spread thickness spread, rolled and consolidated with power roller all as directed by Engr-in-Charge. |
| 15 | Supply and fixing in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 900 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and irected complete all as specified and directed. |
| 16 | Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. complete all as specified and directed. |
| 17 | Supply and fix in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender