Tender For Repairs / Maintenance To Floor Tiles, Aluminium / Wooden Joineries And Cup Boards, Repairs To Kitchen & Toilets Incl Fittings At Varuna And Sagar Residential Complex Of Npol, Kochi.
Tender Value
18 Lakhs
Estimated cost
Bid Submission
25 Sep 2026
17 days left
EMD
36000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs / Maintenance To Floor Tiles, Aluminium / Wooden Joineries And Cup Boards, Repairs To Kitchen & Toilets Incl Fittings At Varuna And Sagar Residential Complex Of Npol, Kochi.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge |
| 2 | M&L Screed bed or bedding layer 15mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and as directed by Engineer-in-Charge |
| 3 | M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm In floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge |
| 4 | S&F Vitrified tiles 10 mm thick, light shade (square/rectangular) polished, area of each tiles n exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed. |
| 5 | M&L Rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces and finishing even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge |
| 6 | S&F glazed ceramic coloured tiles 350x250x7mm / 450x300x7mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed in white/colour cement to match over, Complete all as specified and directed by Engineer-in-Charge. |
| 7 | M&L for 25 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding to edges of stone slabs one edges, such as in steps, platform, and other similar situations complete all as specified and directed by Engr-in-Charge. |
| 8 | Demolition of cement concrete (unreinforced) in ground floors and paving’s not exceeding 15cm thickness (below or above ground level) complete all as specified and directed. |
| 9 | M&L 25mm thick Cement concrete type B-0,1:2:4 (12.5mm graded aggregate) complete all as specified and directed. |
| 10 | M&L coloured chequered cement concrete tiles glossy finished 30cm x 30cm x 25 mm thick, with grey cement & pigments set, jointed and pointed in neat cement slurry in floors including 15 mm thick screed bed in cement mortar (1:4) and laying floor finishes complete all as specified and directed by Engineer-in-Charge. |
| 11 | Supply and laying fine aggregate 50mm thick spreading and levelling in layers n exc 25cm thick incl consolidation complete all as specified and directed. |
| 12 | M&L for Machine pressed precast concrete interlocking paver block (shape as per sample in AGE B/R (P) sample room), with grey cement and pigment and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified as directed by Engr-in- Charge |
| 13 | PCC 1:3:6 type C-1(20 mm graded aggregate) as in copings including necessary form work, complete all as specified and directed. |
| 14 | Taking down shutters of any description exc. 1 Sqm and n. exc. 2 Sqm each resecuring or easing & adjusting including re-fixing in the same opening complete all as specified and directed. |
| 15 | Taking down shutters of any description n exc 1 sq. m each resecuring or easing & adjusting including re-fixing in the same opening complete all as specified and directed. |
| 16 | Taking down chowkats or frames exc 1.5 Sq. m but not exc 4 Sqm each but with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 17 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames), not exceeding 1.5 Sq.m each, complete all as specified and directed. |
| 18 | S&F Plain, solid, straight chowkats and frames using second class hard wood, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as specified and directed by Engr-in-Charge. |
| 19 | S&F Plain framed, factory made panelled shutter (any number of panels) of second class hard wood, 35mm thick, with panels of timer flat or both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and directed by Engr-in-Charge. |
| 20 | S&F Second class hard wood Glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.,sizes of members of shutters as specified in SSR Part - I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and directed by Engr-in-Charge. |
| 21 | S&F Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. but with sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I section 8, clause 8.24 (a); supplied and fitted to chowkats 2nd class hard wood of 30mm thick complete all as specified and direted by Engr-in-Charge. |
| 22 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube , supplying & fixing in opening as per specification and making good and matching the existing surface complete all as specified and directed by Engr-in-Charge. |
| 23 | M&L for factory made solid single extruded panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gape inside for top rail and bottom rail: panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed PVC the style & rails with suitable PVC sheet beading and jointed to gather with solvent cement complete all as specified and directed by Engr-in-Charge. |
| 24 | S&F anodised aluminum frame with two/ three track for sliding doors, windows, ventilators, modular kitchen cupboards, wardrobes with one or more rebates including joining cleat for fixing etc. Powder Coating to anodised aluminum frame (minimum thickness of powder coating 50 micron) and complete all as specified and directed by Engr-in-Charge. |
| 25 | S&F anodised aluminum powder coated window and ventilator shutters, side hung/sliding type without sash, aluminum sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, anodised aluminum fittings such as hinges Type B-21 100mm long ( 2 Nos) suitable handle and rollers for sliding window shutters etc. complete all as specified. Note: After fixing of aluminum window the surface gap should be filled with CM and making good including matching the existing surface. |
| 26 | S&F of anodised aluminum window and ventilator shutters, fixed type without sash bar, aluminum section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. Powder Coating to anodised aluminum frame (minimum thickness of powder coating 50 micron) and complete all as specified and directed by Engr-in-Charge. |
| 27 | S&F of Aluminum Composite Panel of approved colour/ pattern (ACP Sheets) of 4mm thick interior quality to make modular kitchen cupboards and wardrobes with sliding type door panels including necessary handles/ Knobs of good quality (minimum one handles per door) and magnite door catching clips etc. complete all as specified and directed by Engr-in-Charge. |
| 28 | S&F Aluminum anodised deco grill of 50mm x 50mm fitted with 'C' channel fixed with wall, complete all as specified and directed. |
| 29 | M&L Applying one coat of oil bound distemper over a coat of primer including preparation of old decorated or unplastered surfaces of walls including cornices, pilasters by brooming down or steel wire brushing, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spots and complete all as specified and directed by Engineer-in-Charge |
| 30 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 31 | M&L for Applying one coat of oil bound distemper including preparation of old decorated or unplastered surfaces of ceiling including cornices, pilasters by brooming down or steel wire brushing, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spots and complete all as specified and directed by Engineer-in-Charge |
| 32 | S&F in repair prelaminated particle board of 25mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work for wardrobe shutters, cupboard shutters, partition to the cupboards, drawers including necessary fixing arrangements complete all as specified and directed by Engr-in-Charge. |
| 33 | S&F in repair of 40mm dia, cupboard/ drawer knobs brass polished and fixed with nut, screw and washer and complete all as specified and directed by Engr-in-Charge. |
| 34 | S&F auto close stainless steel hinges of '0' crank (minimum weight should be 250 gm) used for cupboard shutters and similar work fixing with screws to the frames/ chowkats, including making easy to open/ close of cupboards and complete all as specified and directed by Engr-in-Charge. |
| 35 | Hacking out old broken glass (any thickness,size,quality or description) from wooden frames complete all as specified and directed by Engr-in-Charge. |
| 36 | Hacking out old broken glass from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones and complete all as specified and directed by Engr-in-Charge. |
| 37 | S&F Sheet glass, 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane, complete all as specified and directed. |
| 38 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 39 | S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 40 | S&F Butt hinges, medium weight cold rolled mild steel 100 mm size. |
| 41 | S&F Butt hinges, medium weight cold rolled mild steel 75 mm size. |
| 42 | S&F Aluminum anodised, barrel tower bolts, 150mm long, of extruded section and fixed, complete all as specified and directed by Engr-in-Charge. |
| 43 | S&F in repairs of Aluminum anodised, barrel tower bolts, 150mm long, of extruded section and fixed, complete all as specified and directed by Engr-in-Charge. |
| 44 | S&F Aluminum anodised, barrel tower bolts, 100mm long, of extruded section and fixed, complete all as specified and directed by Engr-in-Charge. |
| 45 | S&F in repairs of Aluminum anodised, barrel tower bolts, 100mm long, of extruded section and fixed, complete all as specified and directed. |
| 46 | S&F extruded aluminium alloy handles fabricated type anodised 150 mm long. |
| 47 | S&F fixed in repair extruded aluminium alloy handles fabricated type anodised 150 mm long. |
| 48 | S&F of extruded aluminium alloy handles fabricated type anodised 100 mm long. |
| 49 | S&F in repairs of extruded aluminium alloy handles fabricated type anodised 100 mm long. |
| 50 | S&F Aluminium alloy, anodised, sliding door bolt, 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed. |
| 51 | S&F in repairs of Aluminium alloy, anodised, sliding door bolt, 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed by Engr-in-Charge. |
| 52 | S&F of Mild steel, 300mm long, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed by Engr-in-Charge. |
| 53 | S&F in repair Mild steel, 300mm long, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed by Engr-in-Charge. |
| 54 | S&F of Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length 150mm complete all as specified and directed. |
| 55 | S&F in repair of Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length 150mm including taking down existing unserviceable stopper, complete all as specified and directed. |
| 56 | M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 57 | Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, depth of embedded portion of holdfasts or lugs as measured from the face of the jamb in to the wall shall be exceeding half brick but not exceeding one brick thick, including making good by plaster and matching the surface with suitable colour of OBD/ distemper complete all as specified and directed by Engr-in-Charge. |
| 58 | S&F Sheet glass, 4mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane, complete all as specified and directed. |
| 59 | S&F Looking mirror 600mm X 450mm bevelled edge mirror of selected quality galss mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers fixed in repairs complete all as specified and directed by Engr-in-Charge. |
| 60 | S&F in repair of Aluminium Anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges |
| 61 | M&L Applying one coat of oil bound distemper over a coat of primer including preparation of old decorated or unplastered surfaces of ceiling including cornices, pilasters by brooming down or steel wire brushing, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spots and complete all as specified and directed by Engineer-in-Charge |
| 62 | S&F in repairs of Steel Drapery rod 25mm bore colour coated of desired colour with pair of PVC Funnel and Bracket for length n exc 2.0 m Max length complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender