Tender For Special Repairs Of Sailors Washroom Of Dormitory 1 And Dormitory 2 Block At installation Baaz, C Bell Bay
Tender Value
38 Lakhs
Estimated cost
Bid Submission
26 Sep 2026
10 days left
EMD
76000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nicobars → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs Of Sailors Washroom Of Dormitory 1 And Dormitory 2 Block At installation Baaz, C Bell Bay
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver4.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GARRISON ENGINEER CAMPBELL BAY Name of Work: SPECIAL REPAIRS OF SAILOR'S WASHROOM OF DORMITORY 1 AND DORMITORY 2 BLOCK AT INS BAAZ, CAMPBELL BAY Contract No: GE CAMPBELL BAY/ / OF 2026-27 Name of the Bidder/ Bidding Firm / Company : SCHEDULE 'A'(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 for layying floor finished including Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 3 | M&L for glazed ceramic coloured tiles of size 350 x 250 x 7mm/450 x 350 x 7mm thick s in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4 as for backing coat to receive wall tiles etc including dismantling of floor, hearth or wall tiling, cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 4 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 for layying floor finished including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 5 | M&L for rubber moulded Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement & pigment over and including 15mm thick screed bed or bedding layer in CM 1:4 for laying floor finished including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 6 | S&F for aluminium anodised snap grid frame (with minimum 15 micron uniform anodic coating) size of 600 X 600 mm consisting of Tee/ Angle section of size 40x40x2 mm thick as approved make confirming to IS-733 in frames of false ceiling including aluminium cleats with necessary CP brass / stainless steel shunk screws, aluminium perimeter angles fixed to wall wooden frame at centre to centre and fixing frame to level adjusting anchors 6mm dia GI wire hook in Tee members at 1.5 m centre to centre fixed to steel truss of roof including dismantling of Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including hangers & cover fillets/frame work etc complete all as specified and directed. |
| 7 | M&L for fixing in position 4 mm thick Non asbestos designer ceiling board of size 595 X 595 mm as per manufacturer's specification complete all as specified and directed. |
| 8 | Taking down chowkat or frames with shutters exc 1.50 sqm and n.exc 4 sqm each but with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed. |
| 9 | S&F for Solid PVC door frame of size 50X47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying & fixing in opening complete all as specified and directed. |
| 10 | S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joining together with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified and directed. |
| 11 | S&F for butt hinges medium weight cold rolled mild steel 100mm complete all as specified and directed. |
| 12 | S&F for 150mm long anodised extruded aluminium alloy handles, fabricated type complete all as specified and directed. |
| 13 | S&F 75mm dia of outer cast iron nahani trap, with grating including jointing to waste pipe fixed in plain cement concrete (1:2:4) type B-0 (using crushed stone aggregates) complete all as specified and directed. |
| 14 | S & F 75mm dia of outer cast iron floor trap, with grating including jointing to waste pipe fixed in plain cement concrete (1:2:4) type B-0 (using crushed stone aggregates) complete all as specified and directed. |
| 15 | S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing corrugated steel sheeting and plain sheet mentioned in item No 18.00 here- in after of any gauage thickness including Nainital and similar pattern complete all as specified and directed. |
| 16 | S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. Note:- Dismantling of existing plain steel sheeting shall be done during dismantling of item No 17.00 here-in- before. |
| 17 | S&F \\"as in repair\\" swan neck Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15mm bore of pipe etc complete all as specified and directed. |
| 18 | S&F \\"as in repair\\" Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets etccomplete all as specified and directed. |
| 19 | S&F \\"as in repair\\" Vitreous China wash down water closet pan (pedestal pattern), white complete all as specified and directed. |
| 20 | S&F \\"as in repair\\" PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with intel, ball valve, float & handle including brackets etc complete all as specified and directed. |
| 21 | S&F \\"as in repair\\" Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe & waste pipe) etc complete all as specified and directed. |
| 22 | S&F \\"as in repair\\" vitreous china urinal partition white of size 310 x 700 mm terminating above floor line incl removing of existing partition complete all as specified and directed. |
| 23 | S&F \\"as in repair\\" Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (min. weight 60gms) etc complete all as specified and directed. |
| 24 | S&F \\"as in repair\\" PTMT waste coupling of 40 mm dia ( half or full threaded ) including taking down old coupling of any description complete all as specified and directed. (Note:- Minimum weight for 40 mm –60 gms). |
| 25 | M&L for CPVC pipes 20 mm dia SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing unserviceable steel tubing wiht fittings and connections complete all as specified and directed. |
| 26 | M&L for CPVC pipes 25 mm dia SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing unserviceable steel tubing wiht fittings and connections complete all as specified and directed. |
| 27 | S&F 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking up or down existing unserviceable steel tubing wiht fittings and connections complete all as specified and directed. |
| 28 | Description all as per item No. 26 above but 110 mm dia bore complete all as specified and directed. |
| 29 | S&F \\"as in repair\\" PVC (SWR) bends any radius 75 mm dia of bore, complete all as specified and directed. |
| 30 | S&F \\"as in repair\\" PVC (SWR) bends any radius 110 mm dia of bore, complete all as specified and directed. |
| 31 | M&L for pre-cast cement concrete block masonary 1:3:6 type C-1 (Using 20 mm graded crushed stone aggregates) with solid block exc 10 cm in width and setting in CM 1:6 etc including demolition of cement concrete block walling, RR masonary set in cement mortar including all quoins archas pillars etc and pre-cast block walling etc complete all as specified and directed. |
| 32 | M&L for rendering 10mm thick cement plaster in CM 1:6 on fair faces of brick work or concrete surfaces finished the surface even and smooth (without using extra cement) etc, complete all as specified and directed. |
| 33 | M&L for rendering 15mm thick cement plaster in CM 1:4 on other then fair faces of brick work or concrete surfaces and finish the surface even and smooth (without using extra cement) etc, mixing and including of WPC as per manufacturer's instructions etc,complete all as specified and directed. |
| 34 | M&L for rendering 10mm thick cement plaster in CM 1:6 on fair faces of brick work or concrete surfaces finished the surface even and smooth (without using extra cement) etc, including taking down existing cement plaster of any description including racking out joints, hacking for key and disposing of debris to a distance exc 1 Km out side MD land complete all as specified and directed. |
| 35 | M&L for rendering 15mm thick cement plaster in CM 1:4 on other then fair faces of brick work or concrete surfaces and finish the surface even and smooth (without using extra cement) etc, mixing and including of WPC as per manufacturer's instructions etc, including taking down existing cement plaster of any description including racking out joints, hacking for key and disposing of debris to a distance exc 1 Km out side MD land complete all as specified and directed. |
| 36 | M&L for preparation of newly plastered or unplastered surfaces of brick, stone, concrete, asbestos cement of any description and applying two coats of Antifungal exterior emulsion paint complete all as specified and directed. |
| 37 | Dismantling of aluminium partition / windows of any size and any description complete all as specified and directed. |
| 38 | S&F powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 39 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and complete all as specified and directed. |
| 40 | M&L for 9 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination, fixed with screws to timber frame work in cup board shutters / aluminium partions etc complete all as specified and directed. |
| 41 | S&F for 5 mm thick figured glass, pin head type and glazing with oil putty / aluminium beading in square exc 0.50 Sqm each in each panel complete all as specified and directed. |
| 42 | M&L for 25mm thick PCC 1:2:4 type B-1 (Using 20 mm graded stone aggregates),finished surfaces even and fair (without using extra cement) including demolition of (Unreinforced) plain cement concrete in ground floors & pavings n exc 15 cm thickness (below or above ground level) and removing debris to outside MD land complete all as specified and directed. |
| 43 | S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 etc including dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 44 | M&L for preparation of steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed. |
| 45 | M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 46 | S&F \\"as in repair\\" 600mm X 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washer etc complete all as specified and directed. |
| 47 | M&L for preparation of old plastered or unplastered surfaces of brick, stone, concrete, asbestos cement of any descriptionand applying one coat oil bound distemper on walls complete all as specified and directed. |
| 48 | S&F \\"as in repair\\" 20mm dia Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms/ 20mm- 92gms) complete all as specified and directed. |
| 49 | S&F \\"as in repair\\" 20mm dia Plug type bib taps, cast iron, screwed for iron pipe and fixed complete all as specified and directed. |
| 50 | S&F \\"as in repair\\" Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 51 | E/M PORTION Taking down carefully any type point wiring (light, fans, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket, etc. and making good disturbed surface of wall/floor etc. complete all as specified and directed. |
| 52 | M & L for point wiring (concealed) on walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit heavy grade accessories, ISI marked, 20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable modular boxes, switch plates of suitable make and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed. |
| 53 | One Light/Fan point controlled by one switch |
| 54 | One switch socket outlet modular type 3 pin 6 amp on same board. |
| 55 | One switch socket outlet modular type 3 pin 6 amp on independent board. |
| 56 | Description all as per item No 51.00 above but 2.5 sq mm cable size and 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 amps on Independent board.complete all as specified and directed. |
| 57 | S&F Switch modular type, single pole one way 6 Amps, 240 volts AC suitable for existing modular switch boxes without indicator, complete all as specified and directed. |
| 58 | S&F socket modular type single pole one way 6 Amps 240 volts suitable for existing modular switch boxesall complete all as specified and directed. |
| 59 | S&F socket modular type 16 Amps, 3 pin combine multistandard, 2 module, 240 volts suitable for existing modular switch boxes complete all as specified and directed. |
| 60 | S&F switch modular type 16 Amps,one way with indicator, 1 module, 240 volts suitable for existing modular switch boxes complete all as specified and directed. |
| 61 | S&F for ceiling rose, surface bakelite, 65 x 50 mm, three terminals, ISI marked complete all as specified and directed. |
| 62 | S&F wall mounted LED 18/20 watts 6500 K with out put of 1800 lumens , box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with integral LED tube 4' x 18 watts complete all as specified and directed. |
| 63 | S&F LED building security lights 25 W IP 66 including 1.5mtr long GI bend pipe of suitable dia and all necessary accessories complete all as specified and directed. |
| 64 | S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with blades, frame and louver including making of holes if require for exhaust fan alongwith removal of old exhaust fan and deposit to E/M sub division storeyard complete all as specified and directed. |
| 65 | S&F sheet metal enclosures for SPN DB's with metal double door for incorporating MCBs, IP-43, 8 way with 200 amps rated busbar, 240 volts, as per IS-8623 including taking down of existing DBs complete all as specified and directed. |
| 66 | S&F MCB SPN, 32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc.complete all as specified and directed. |
| 67 | S&F MCB SP 6-32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. complete all as specified and directed. |
| 68 | M & L for Earthing complete with galvanised steel plate electrode, 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtrs deep below nominal ground level) with top edge of the plate not less than not less than 1.5 metres below nominal ground level connected to earthing lead of 4 mm dia galvanised iron or steel wire all as shown in plate No. 3 of SSR PART 1 of 2009 to the earthing test point inc testing on completion all as specified and as directed. Note :- the cost of excavation and earth work PCC pit and RCC cover funnel & watering pipe, wiremesh, charcoal dust and common salt earth lead protection pipe upto 7.5 Rmt shall be deemed included in the unit rate for earthing complete all as specified and directed. |
| 69 | Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 2.0 core complete all as specified and directed. |
| 70 | S&L of DWC (Double Wall Corrugated) HDPE pipe ISI marked of outer dia 50 mm and inner dia 38 mm with smooth internal and profiled external surface for non pressure under ground cable including all connected accessories like socket, coupler, bends, tees etc for protection of LT cable complete all as specified and directed. |
| 71 | Excavation in trenches in hard/dense soil not exceeding 1.5 meter wide and not exceeding 1.5M in depth for laying of cables and getting out of excavated material complete all as specified and directed. |
| 72 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each, excavated soil in trenches after the pipes have been laid and tested complete all as specified and directed. |
| 73 | Removing excavated soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.50 meter above the starting point complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender