Tender For Repair/Replacement To Fencing/Compound Wall, Gate And Other Connected Work In Kirby Place Area Under The Aor Of Age B/R-I Under Ge (North) Delhi Cantt-10
Tender Value
98 Lakhs
Estimated cost
Bid Submission
02 Oct 2026
3 days left
EMD
1.72 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement To Fencing/Compound Wall, Gate And Other Connected Work In Kirby Place Area Under The Aor Of Age B/R-I Under Ge (North) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) of any descriptioin and in any position not other wise specifically provided complete. |
| 2 | Demolition of reinforced cement concrete in any descriptioin and in any position not other wise specifically provided complete. |
| 3 | Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM(1:4) incl demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified. |
| 4 | Ditto- item No. 3 above but except brick complete. |
| 5 | M&L for providing plain cement concrete type B1, 1:2:4 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm height, copings, kneelers, apex stones, bed plates, kerbs not provided for in water roughs and the like including weathering, slightly rounded or chamfered angles and throating as directed. |
| 6 | M&L 15 mm thick Ready mix plaster on brickwork or concrete surfaces of wall (external surface ) finished even and smooth including Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots complete all as specified and as directed by engr-in-charge. |
| 7 | M&L 15 mm thick Ready mix plaster on brickwork or concrete surfaces of wall (external surface ) finished even and smooth incl taking down old plaster complete all as specified and as directed by engr-in-charge. |
| 8 | Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground , complete all as specified and directed. |
| 9 | Dismantling of fencing wire mesh, any type, complete all as specified and directed. |
| 10 | Dismantling wrought iron or mild steel work of any description not other wise provided. |
| 11 | Excavation in post holes (or similar holes ) each n. exc 0.5 Cum in soft/loose soil, getting out,removing soil to a distance n. exc 50M , complete all as specified and directed. |
| 12 | Plain cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete, complete all as specified and directed. |
| 13 | Mild steel angle iron posts and struts, MS flat iron fillet securing chain link fencing confirming to FE-290 E-165 as in fencing including cutting tops for required shape, drilling holes,bolting, notching for wire including all necessary drilling of similar work, complete all as specified and directed. |
| 14 | Supply only Chain link MS galvanisd fencing, any size or type, weight not less than 2.50 Kg/Sqm, galvanized with zinc coating of min 250 GMS of as per IS standards fixing with GI wire, icluding cutting, bending, fixing in any postiion and straining bolts etc complete all as specified and directed. |
| 15 | Fixing only chain link fencing including line wire, any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire, complete all as specified and directed. |
| 16 | Mild steel round bars 10 to 12mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 17 | S&F MS screw bolts (machine made) with hexagonal or square heads at one ends and screwed the other, or screwed both ends, each screwed end to be fitting with washer and one hexagonal or square nut n.exc. 5cm long and dia of shank 8 to 10 mm etc. |
| 18 | M&L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete. |
| 19 | Supply & fixing Galvanised Concertina coil punched type 600mm dia, 10 m openable length (total length 90m) having 50 Nos round per 6 m lenght, dia of Core wire 2.5 mm(+/- 1mm) with tensile strength of 160Kg/Sqm, with zinc coating of min 240 GMS, thickness of galvanised rozer blade 0.6 mm (+/- 0.5mm) of 30mm length, fixing/securing or tying in position over existing barbed bire and Y shaped angel iron upto 3.0 m ht of wall incl provn of MS wire stapples or steel pins etc, in dismantling of old concertina coil complete all as specified and directed.(Note : Y shaped angle iron and barbed wire shall be measure and paid seperately) |
| 20 | M&L for preparation of old plastered surfaces of wall and applying two or more coat of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489;2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm using auto-roller and airless paint sprayer incl Complete removing of existing treatment by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\" to 9\\" to make the surface free from dust, loose paint etc. by skilled labour complete all as specifiec and as directed. |
| 21 | M&L for preparation of new plastered surfaces of wall and applying two or more coat of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489;2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm using auto-roller and airless paint sprayer complete all as specifiec and as directed. |
| 22 | S & F rolled mild steel as in doors or gate of angle of other section with gusset plates, rails, braces,frame work of GRC jali, etc complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fitting(exlusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete. |
| 23 | RCC design mix M-25 forFoundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete |
| 24 | M&L for one coats of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed. |
| 25 | M&L for exterior wall tiles 8 to 10mm thick & not exc 0.18 sqm in size , colour & shade of tiles as approved by Engr-in-charge,set and jointed in neat cement slurry and pointed in coloured cement to match the surface over 10 mm thk backing coat in CM 1:4 including taking down old tiles complete all as specified and directed by Engr-in-Charge. |
| 26 | Providing and fixing of GRC Jali (Glass Fibre Reinforced Jali) 30 to 50mm thick of required size, pattern, design, and colour with 50% area covered to be fixed on/between RCC/Block work Column or structural steel work with Dry Fixing method. The Jali shall be securely fixed with stainless steel bolts and anchor fastners (304 grade) of required size at specified locations, the fixing shall be done by the specialized approved agency complete all as specified and directed. |
| 27 | Providing, fabricating, supplying and fixing non-illuminated 3D Stainless Steel (Grade 304) raised letter, numeral, symbol or insignia of approved font, design and size of exeetinh 300mm not exceeding 600 mm height, fabricated from SS sheet having face thickness not less than 1.2 mm and return thickness not less than 0.8 mm, with overall depth 25–50 mm, complete with laser cutting, bending, welding, grinding and polishing to obtain smooth edges and seamless finish. The letter shall be finished in brushed hairline / mirror finish as approved and fixed with SS studs, spacers, screws, anchor fasteners, templates, silicone sealant and all necessary accessories over masonry, ACP cladding, steel gate, signboard or approved backing surface in true alignment, complete all as specified and directed by the Engineer-in-Charge. |
| 28 | Providing and fixing 4 mm thick aluminium composite panel exterior grade (0.5mm PVDF coated Aluminium skin on top & bottom plus 5mm thick polyethylene core) on/all-round RCC/Brick column/wall/Fascia's/M.S. section/Aluminium section structure/dead walls/under side sky light upto all heighs in required colour/pattern & panel size as (Area of panel shall not more than 0.60Sqm per drawing fixed on aluminium extruded standard tubular section of size 38x25x1.6 mm of approved make (Jindal/Hindalco/Indalco) conforming to IS;733 and IS; 1285, fixed at 600 m center to center with rawl plugs and screws or with fixing clips or with expansion hold fasteners Aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angle CP brass/stainless steel screws, with 12mm (wide) x 20mm (deep) groove in joints or lpanels including filling the joints with weather silicon sealant of Dow coming 789 or equivalent of approved colour inacp ACP, weather sealant structural sealant/adhesive tape, masking tap,primer/Gasket/Foam/Scaffolding/ cluding 10mm dia backer rod, The rate shall include cost of ACP Panel, subframe of aluminium section for fixing of ACP, weather sealant structural sealant/adhesive tape, masking tape primer/Gasket/Foam/Scaffolding/ Aluminium cleats with screws complete including making openings as required at site like electical fittings, recess for pipe etc, all anecessary tools and plants, scaffolding and as per manufacture technical specifications, including dismantling complete and as per the direction of the Engr-in-Charge (Surface area of aluminium composite panel shall be measured for payment. |
| 29 | M&L granite 18-20mm thick colour as approved (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms or making oval shape hole for fixing of wash hand basin and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cement mortar 1:6 including moulding and polishing the edges complete all as specified and directed |
| 30 | M&L granite 18-20mm thick colour as approved (of any type) work (table rubbed and polished) in for wall lining (veneering to wall) 12mm thick in cement mortar 1:3 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including moulding and polishing the edges etc complete all as specified and directed |
| 31 | S&F Factory Made 18mm thick 100% Solid WPC Jali (Wood polymer Composite) design of Jali as approved, comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/wheat husk) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/Borer Free. Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing compancy. |
| 32 | S&F Frame work of WPC Size of frame 75 mm x 50 mm all as per directions of Engr-in-Charge. |
| 33 | S&F 2mm thick fibre glass reinforced translucent sheeting fixed with proper side lap fixed with coach screw and washer in iron gate,roof,wall etc including dismantling of old sheet of any type complete all as specified and directed. |
| 34 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) and rubbish off the premises, complete all as specified and as directed. |
| 35 | M & L for 25mm thick PCC 1:2:4 (Type B-1) 12.5 mm aggregate as in sub base floor complete all as specified and as directed. |
| 36 | M & L for chequred cement concrete tile with grey cement and pigment 30 cm X 30cm X 25 mm thick set, jointed and pointed in neat cement slurry in floors over 15 mm thick Screed bed or bedding layer of mortar 1:6 for laying floor finishes,complete all as specified and as directed. |
| 37 | M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate, 75mm thick as in sub base complete all as directed and specified |
| 38 | M&L for precast concrete interlocking paver block any shape and size confirming to IS-15658 - 2006 of 60mm thickness M-35 grade with gray cement and no pigment over 40 mm thck sand cushioning complete all as specified and directed. |
| 39 | M&L for cement concrete type B-0, 1:2:4 using 12.50mm graded aggregate in roof, kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 40 | S&F for factory made kerb stone of M-25 grade precast cement concrete stone laid in position to the required line, level and curvature jonted with cement mortor 1:3 incl making the joint with or without grooves incl making drainage opening where ever required complete as per direction of Engr-in-Charge. |
| 41 | M&L for painting of two coats synthetic enamel paint over kerb stone in white/yellow/black/ shade incl priming coat and cleaning/preparation of the new surface laid as per desigh approved by Engr-in-charge |
| 42 | S&F prepainted galvalume aluminium zinc coating GI based corrugated steel 0.50 mm thk of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw as in roof incl dismantling of old sheets of any description complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender