Tender For maintenance and repair To Centralized Water Supply Scheme At Ahilyanagar... Annual Maintenance Contract Of Vt Pumps & Rewinding, Overhauling Of 3 Phase Lt Motors At Cwss Ahilyanagar.
Tender Value
36.87 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
11 days left
EMD
36900
Bank guarantee accepted
Document Fee
8850
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ahmednagar → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for maintenance and repair To Centralized Water Supply Scheme At Ahilyanagar... Annual Maintenance Contract Of Vt Pumps & Rewinding, Overhauling Of 3 Phase Lt Motors At Cwss Ahilyanagar.
BOQ
| Sl. No. | Item Description |
| 1 | Sub Estimate for Annual maintenance contract of VT pumps & rewinding, overhauling of 3 phase LT motors at CWSS Ahilyanagar. |
| 2 | 1) Dismantling & overhauling of Vertical Turbine pumps from the position having 10 mtrs. suspended length (from Bell Mount to Discharge Head.), cleaning, checking, aligning, assembling i.e., refitting, commissioning with trial run on no load & full load for at least 30 minutes including replacement of spare parts, fastners (which shall be made available by MIDC at free of cost at site of work) etc. complete as per site requirements.1.1) 10 HP to 60 HP. |
| 3 | 1) Dismantling & overhauling of Vertical Turbine pumps from the position having 10 mtrs. suspended length (from Bell Mount to Discharge Head.), cleaning, checking, aligning, assembling i.e., refitting, commissioning with trial run on no load & full load for at least 30 minutes including replacement of spare parts, fastners (which shall be made available by MIDC at free of cost at site of work) etc. complete as per site requirements.1.2) 61 HP to 200 HP. |
| 4 | 1) Dismantling & overhauling of Vertical Turbine pumps from the position having 10 mtrs. suspended length (from Bell Mount to Discharge Head.), cleaning, checking, aligning, assembling i.e., refitting, commissioning with trial run on no load & full load for at least 30 minutes including replacement of spare parts, fastners (which shall be made available by MIDC at free of cost at site of work) etc. complete as per site requirements.1.3) 201 H.P to 300 HP. |
| 5 | 2) Fabrication of spares for the pumping machinery suitable to match with the existing fitments & as per actual site conditions including cost of material, salvage, machining, labour, taxes & duties, incidentals, overheads, packing & forwarding etc. complete as per designation given below. 2.1) Axle or Shaft Stainless Steel -304 or 410. |
| 6 | 2) Fabrication of spares for the pumping machinery suitable to match with the existing fitments & as per actual site conditions including cost of material, salvage, machining, labour, taxes & duties, incidentals, overheads, packing & forwarding etc. complete as per designation given below. 2.2) Threaded Sleeve SS 304 or SS 410. |
| 7 | 2) Fabrication of spares for the pumping machinery suitable to match with the existing fitments & as per actual site conditions including cost of material, salvage, machining, labour, taxes & duties, incidentals, overheads, packing & forwarding etc. complete as per designation given below. 2.3) Plain/ Collared Bush Stainless Steel -316 |
| 8 | 2) Fabrication of spares for the pumping machinery suitable to match with the existing fitments & as per actual site conditions including cost of material, salvage, machining, labour, taxes & duties, incidentals, overheads, packing & forwarding etc. complete as per designation given below. 2.4) Plain collared Bush... Gun Metal. |
| 9 | 2) Fabrication of spares for the pumping machinery suitable to match with the existing fitments & as per actual site conditions including cost of material, salvage, machining, labour, taxes & duties, incidentals, overheads, packing & forwarding etc. complete as per designation given below. 2.5) Plain collared Bush... Neoprene Rubber. |
| 10 | 2) Fabrication of spares for the pumping machinery suitable to match with the existing fitments & as per actual site conditions including cost of material, salvage, machining, labour, taxes & duties, incidentals, overheads, packing & forwarding etc. complete as per designation given below. 2.6) Check Nut / Lock nut, Keys SS 304 or 410. |
| 11 | 2) Fabrication of spares for the pumping machinery suitable to match with the existing fitments & as per actual site conditions including cost of material, salvage, machining, labour, taxes & duties, incidentals, overheads, packing & forwarding etc. complete as per designation given below. 2.7) Threaded Coupling... SS 316. |
| 12 | 3) Supplying of High tensile Nut bolts required for jointing column pipes with washer as per sample complete. |
| 13 | 4) Supplying of Rubber packing 1.50 mm , 3.0 mm & 6.0 mm et complete. |
| 14 | 5) Providing, supplying & erecting mechanical seal motor side suitable for 50 HP submerged submersible pump of Aqua make. |
| 15 | 6) Providing, supplying & erecting mechanical seal pump side suitable for 50 HP submerged submersible pump of Aqua make. |
| 16 | 7) Providing, supplying & erecting 'O' ring set suitable for 50 HP submerged submersible pump of Aqua make. |
| 17 | 8) Servicing and overhauling of motors, including removing from location, dismantling cleaning the winding, drying, applying, varnish, baking, changing the bearing if necessary (bearing will be supplied by MIDC) greasing the bearing, assembling, and giving satisfactory trials on No load and full load etc.8.1) 415 volts, 3 phase upto 5 HP. |
| 18 | 8) Servicing and overhauling of motors, including removing from location, dismantling cleaning the winding, drying, applying, varnish, baking, changing the bearing if necessary (bearing will be supplied by MIDC) greasing the bearing, assembling, and giving satisfactory trials on No load and full load etc.8.2) 415 volts, 3 phase upto 36 HP to100 HP. |
| 19 | 8) Servicing and overhauling of motors, including removing from location, dismantling cleaning the winding, drying, applying, varnish, baking, changing the bearing if necessary (bearing will be supplied by MIDC) greasing the bearing, assembling, and giving satisfactory trials on No load and full load etc.8.3) 415 volts, 3 phase upto 125 HP to 200 HP. |
| 20 | 8) Servicing and overhauling of motors, including removing from location, dismantling cleaning the winding, drying, applying, varnish, baking, changing the bearing if necessary (bearing will be supplied by MIDC) greasing the bearing, assembling, and giving satisfactory trials on No load and full load etc.8.4) 415 volts, 3 phase upto 225 HP to 300 HP. |
| 21 | 9) Rewinding and repairs of Squirrel cage induction motors, 440 V, 3 phase, 50 cycles/sec. 1500 RPM with B class insulation including baking, varnishing, painting etc. (The scrap of winding material shall be retained by rewinder.)9.1) 60 HP. |
| 22 | 9) Rewinding and repairs of Squirrel cage induction motors, 440 V, 3 phase, 50 cycles/sec. 1500 RPM with B class insulation including baking, varnishing, painting etc. (The scrap of winding material shall be retained by rewinder.)9.2) 150 HP. |
| 23 | 9) Rewinding and repairs of Squirrel cage induction motors, 440 V, 3 phase, 50 cycles/sec. 1500 RPM with B class insulation including baking, varnishing, painting etc. (The scrap of winding material shall be retained by rewinder.)9.3) 300 HP |
| 24 | 9) Rewinding and repairs of Squirrel cage induction motors, 440 V, 3 phase, 50 cycles/sec. 1500 RPM with B class insulation including baking, varnishing, painting etc. (The scrap of winding material shall be retained by rewinder.)9.4) 50 HP Submersible VT Pump's Motor |
| 25 | 10) Rewinding of submersible pump motor of all types and makes upto 15 HP with coated copper wires and overhauling with minor repairs, testing for the original speed, HP and no load consumption and guarantee for one year. (The scrap of winding material shall be retained by rewinder.) |
| 26 | 11) Rewinding of electric motor upto 5 H.P. three phase upto 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, replacing ball bearing, bush bearing, screws etc. testing for the original speed and no load consumption with guarantee for one year. |
| 27 | 12) Supply of terminal connection plate for various capacity motor of suitable size as per sample. 12.1) 300 HP. |
| 28 | 12) Supply of terminal connection plate for various capacity motor of suitable size as per sample. 12.2) 150 HP Motors. |
| 29 | 12) Supply of terminal connection plate for various capacity motor of suitable size as per sample. 12.3) 60 HP Motors |
| 30 | 13) Supply of bearing oil of apporved quality. |
| 31 | 14) Supply of approved quality bearing grease. |
| 32 | 15) Supplying and erecting of SKF make bearings required as per requirement of Pumps and motors.15.1) NU322 ECM. |
| 33 | 15) Supplying and erecting of SKF make bearings required as per requirement of Pumps and motors.15.2) 7322 BECBM. |
| 34 | 15) Supplying and erecting of SKF make bearings required as per requirement of Pumps and motors.15.3) 29324E. |
| 35 | 15) Supplying and erecting of SKF make bearings required as per requirement of Pumps and motors.15.4) 6318/C3. |
| 36 | 15) Supplying and erecting of SKF make bearings required as per requirement of Pumps and motors.15.5) 6312C3. |
| 37 | 15) Supplying and erecting of SKF make bearings required as per requirement of Pumps and motors.15.6) 6212/C3. |
| 38 | 15) Supplying and erecting of SKF make bearings required as per requirement of Pumps and motors.15.7) 7316-BEP. |
| 39 | 16) All Polypropylene Capacitors (APP).16.1) Supplying and erecting bank of All Polypropylene capacitors with the standard capacities of 1, 2, 3, 5, 7, 12.5, 15, 20 and 25 KVAR units of power factor correction for operation on 3 phase, 50 Hz, 400 V+/- 10% with externally discharging resistances, earthing terminals and built on angle iron or channel iron frame work and provided with terminal cover box complete erected and tested. |
| 40 | 17) Batteries for Inverter & UPS.17.1) Supplying and erecting 12 V/180Ah Tubular battery with battery terminal wire, duly charged complete with 36 months warranty complete |
| 41 | 18) Fans (FG-FN).18.1) Supplying pedestal type air circulator 600 mm. sweep oscillating type suitable to work on 230 Volts 50 cycles 1440 RPM without speed regulator, metallic blades, overheat protection unit, totally enclosed, flame proof motor with additional 3 core wire, 5 metre length and hand shield type 3 pin6A. plug top complete with moisture proof treatment and ‘E’ class insulation. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender