Tender For Restoration Of Veer Baba Narsingh Ji Temple 250 Yrs. Sunderbani
Tender Value
1.18 Crore
Estimated cost
Bid Submission
12 Sep 2026
2 days left
EMD
2.36 Lakhs
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rajouri → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Veer Baba Narsingh Ji Temple 250 Yrs. Sunderbani
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metre All kinds of soil 80% and 20% hard rock |
| 2 | Coursed Rubble Masonry with hard stone in foundation and plinth and curing complete with Lime mortar 1:1:1 (1 Lime putty: 1 Surkhi: 1 Fine sand) 2nd sort |
| 3 | Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level including curing complete with Lime mortar 1:1:1 (1 Lime putty: 1 Surkhi: 1 Fine sand) |
| 4 | Providing and laying in position lime concrete with graded stone/brick aggregate 40 mm nominal size and 40% mortar comprising of 1:1:1 (1 lime putty: 1surkhi: 1fine sand) including curing complete but excluding cost of centering andshuttering. All works upto plinth level with: Graded Stone Aggregate |
| 5 | Pointing on stone work with cement mortar 1 : 3 (1 cement/Lime putty : 3 fine sand) Raised and cut pointing |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with1:4:8 (1 cement/lime putty : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 7 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level & above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 9 | Centring and Shuttering including strutting, propping etc and removal of form work for Foundations: footings, bases of columns etc. for mass concrete. |
| 10 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 lime putty : 6 coarse sand) upto plinth level including curing. One face dressed Fine chisel dressed |
| 11 | Extra for fine chisel dressed Devri Stone in square or rectangular Pillars |
| 12 | Providing and fixing Ornamental heritage type stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 13 | Providing and laying machine cut, mirror polished Marble stone flooring with 18 mm thick marble stone, of approved size, pattern & design as per sample of marble approved by Engineer-in-charge, including granite band /border , tikki /square ( if any ) pattern over 20 mm (average) thick base of lime mortar 1:2 (1 lime : 2 surkhi) laid and jointed with lime mortar, including rubbing and polishing complete with :18 mm thick Granite Stone of approved shade |
| 14 | Consolidation of art work/fresco/painting after cleaning, using lime and other traditional materials as per original under the supervisor of an art- conservator. |
| 15 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 16 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 17 | Extra for brick work in superstructure above plinth level upto floor V level. (By manual means) |
| 18 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 19 | Extra for half Brick masonry in superstructure above plinth level upto floor V level.. |
| 20 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 21 | Centring and shuttering including strutting , propping etc. and removal of form work for Suspended floors, roofs, landing, balconies and access plate form |
| 22 | Centring and Shuttering including strutting, propping etc and removal of form work for Edges of Slabs and Break in floors and walls (Under 20 cms wide) |
| 23 | 6mm cement plaster to ceiling of mix 1:3 ( 1 cement: 3 fine sand). |
| 24 | 12 mm cement plaster of mix 1:6 ( 1 cement : 6 coarse sand) |
| 25 | 15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 6 ( 1 cement : 6 fine sand). |
| 26 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 27 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m. |
| 28 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 29 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete In colour such as White, Ivory, Grey, Fume Red Brown . |
| 30 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete . |
| 31 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work. |
| 32 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 33 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 34 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete. |
| 35 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 25mm nominal outer dia pipes. |
| 36 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing 20mm nominal outer dia pipes. |
| 37 | Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS 13592 type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. Single socketed pipes |
| 38 | 75mm dia |
| 39 | 110mm dia |
| 40 | Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS 13592 type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. Single tee without door |
| 41 | 75mmx75mmx75mm dia |
| 42 | 110mmx110mmx110mm |
| 43 | Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS 13592 type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. Bend 87.5 degree |
| 44 | 75mm dia |
| 45 | 110mm dia |
| 46 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 47 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 48 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 49 | Providing and fixing uplasticized PVC connection pipe with brass unions 30 cm length 15 mm nominal bore |
| 50 | Providing & fixing C.P brass bib cock of approved quality conforming to IS:8931.(15mm nominal bore) |
| 51 | Providing & fixing C.P brass angle valve for basin mixer and geyser points of approved make conforming to IS:8931 (15mm nominal bore) |
| 52 | Proving and laying in position flow trap including all fittings , complete job. |
| 53 | Providing and fixing CP grading of 100 mm dia of approved brand. |
| 54 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. |
| 55 | Providing and fixing CPVC ball valve of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore |
| 56 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Flexible pipe 32 mm dia |
| 57 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 58 | Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design |
| 59 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. complete job as per direction of engineer-in-charge |
| 60 | Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive |
| 61 | Providing and laying of Stone Soling hand packed and Compacted with Hand Roller Including Carriage Complete . |
| 62 | Manufacturing Supplying And Fixing stainless steel over head Signage boards made up of 2mm thick Stainless steel sheet as approved by Engineer-in-charge, letters borders etc , as per IRC :67-2001 and fixing the same to the plate of structural frame work of stainless steel by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mmc/c all malong the periphery as well as in two vertical rows along with theft resistant measures. the rate includes the cost of rounding off the corners lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing specification and direction of Engineer-in-charge (Structural frame work including S.S plate to be provided seperately Rectangular area of the sheet only shall be measured for payment). |
| 63 | Engraving letters over Stainless steel plate with laser technology including all geometrical features with logos complete job as per the sample to be provided by the Engineer-in-charge (Engraving to be done in English/Hindi & Urdu) |
| 64 | Carriage of materials by mechanical transport including loading / unloading and stacking complete. Sand lead up to 60 kms avg. |
| 65 | Carriage of materials by mechanical transport including loading / unloading and stacking complete. Lime lead up to 60 kms avg. |
| 66 | Carriage of materials by mechanical transport including loading / unloading and stacking complete. Surkhi lead up to 60 kms avg. |
| 67 | Carriage of materials by mechanical transport including loading / unloading and stacking complete. Stone aggregate lead up to 15 kms avg. |
| 68 | Carriage of materials by mechanical transport including loading / unloading and stacking complete. Stone lead up to 15 kms avg. |
| 69 | Carriage of materials by Manual Labour including loading / unloading and stacking complete. Sand lead up to 0.5 km avg. |
| 70 | Carriage of materials by Manual Labour including loading / unloading and stacking complete. Lime lead up to 0.5 km avg. |
| 71 | Carriage of materials by Manual Labour including loading / unloading and stacking complete. Surkhi lead up to 0.5 km avg. |
| 72 | Carriage of materials by Manual Labour including loading / unloading and stacking complete. Stone aggregate lead up to 0.5 km avg. |
| 73 | Carriage of materials by Manual Labour including loading / unloading and stacking complete. Stone lead up to 0.5 km avg. |
| 74 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. complete job as per direction of engineer-in-charge |
| 75 | Providing electric point with condiduct, wiring angle switch pannel board |
| 76 | Providing Ornamental light LED 10 watt with 2'-0\\" post 2'' dia |
| 77 | Providing Ornamental Spot light LED 25 watt of different colours |
| 78 | Providing & fixing Pannel Board and Supply Line |
| 79 | Providing & fixing of cost iron heritage type decorative pole (dual aram) 6 meter high at required Spot. Including LED ornamental light with wiring (underground Cable and controlling panel). Including earth work and providing M-15 grade concrete pedestral upto 0.9 m deep and 0.45 m above. |
| 80 | Providing & fixing of Traditional outdoor wall /garden light.Cast Aluminium Unbreakable Acrylic Exterior water proofing for lamp |
| 81 | Supplying and fixing stainless stell benches of SS 304 Grade with three seater with Armed grilled in laser cutting logo through CMC cutting machine design logo in front side of bench approved by engineer in Charge. The bench shall be firmly fixed with cement concrete 1:3:6 mix platform incl all carriges complete.Min. weight 30 kg |
| 82 | Supplying and fixxing Hut type double pole hanging dustbins of size 380mm dia,1070mm and 0.60mm th. Having capacity of 70 litres min of grade SS 304 and making sticker of dry and wet waste (Vertical pipe 58 mm dia,1500 mm high SS- 304 min wt. = 40 kg, Sand height 1300 = 5mm SS- 304, Canopy of size 380 x 1070 mm SS-304, Base plate of size 150 mm x 150 mm x 3mm th. Embeded in cement con. 1:3:6 mix, Hut sheet 580 x 1150 mm) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender