Tender For Special Repairs To Toilets In Otm Accn Bldg No P-41/2 To P-41/4(Partly ) At 16 Madras Under Ge Stm Chennai .
Tender Value
48.39 Lakhs
Estimated cost
Bid Submission
02 Oct 2026
0 days left
EMD
96780
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Toilets In Otm Accn Bldg No P-41/2 To P-41/4(Partly ) At 16 Madras Under Ge Stm Chennai .
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 25-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 02-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | B/R PORTIONDemolition of (unreinforced) concrete of any description and in any position not otherwise specifically provided for, complete all as specified and as directed. |
| 2 | Demolition of (unreinforced) concrete in ground floor and paving n.exc 15 cm thickness, complete all as specified and as directed |
| 3 | M & L for 25 mm thick plain cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub-floors, sub bases, floors and pavings all as specified and as directed. |
| 4 | M & L for 10mm thick rendering 10mm thick in CM (1:4) using water proofing compound on fair faces of brick/ concrete surfaces and finished the surfaces even and smooth without using extra cement, complete all as specified and directedNote: Water proofing compound shall be measured and paid separately. |
| 5 | Supply only liqiuid water proofing compound all as specified and as directed. |
| 6 | M & L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces all as specified and as directed. |
| 7 | M & L for APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and as directed. |
| 8 | M & L for plain cement concrete type E-2 cement concrete 1:5: 10 (40mm graded aggregate), as in foundations, filling and mass concrete all as specified and as directed. |
| 9 | Supplying and laying of 40mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. |
| 10 | M & L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 20mm thick screed bedding in CM (1:4), complete all as specified and directed. |
| 11 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed. |
| 12 | M & L for coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450x 350x 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match, laid over and including 10mm thick rendering in cement mortar (1:4), complete all as specified and as directed. |
| 13 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n.exc 1.5 Sqm complete all as specified and as directed. |
| 14 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4.00 Sqm complete all as specified and as directed. |
| 15 | Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m, complete all as specified and directed. |
| 16 | Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work in cement mortar 1:4, complete all as specified and as directed. |
| 17 | Supply and fixing factory made uPVC white colour two track two panels sliding glazed window upto 1.50m height made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc., after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 18 | S & F for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk /wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite /borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast /lugs /SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 19 | S & F for factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge) minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 20 | S & F for 100mm butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11, complete all as specified and directed. |
| 21 | S & F for 150mm aluminium anodised, barrel tower bolts of extruded section , complete all as specified and directed. |
| 22 | S & F for aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed. |
| 23 | Taking up or down 25mm dia bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed. |
| 24 | Supplying and laying of CPVC pipes 25 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls /ceiling or laying in floors complete all as specified and as directed. |
| 25 | Supply, fixing and laying 25mm outer dia Female Brass Threaded Adaptor (FTA/ FBTA), complete all as specified and directed. |
| 26 | Supply, fixing and laying 25mm outer dia brass Tee/Brass reducer Tee 25 x 20mm complete all as specified and directed. |
| 27 | Taking up or down 20mm dia bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed. |
| 28 | Supplying and laying of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 29 | S & F of CPVC brass Tee for 20 mm outer dia pipe, complete all as specified and directed. |
| 30 | S & F of CPVC Brass Elbow for 20 mm outer dia pipe, complete all as specified and directed. |
| 31 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting not exc 10 cm girth, complete all as specified and directed. |
| 32 | S & F in repair counter wash hand basin white (with collar) ovel ceramic glossy finish, size 22\\"x16\\"x8\\", complete all as specified and directed. |
| 33 | S & F in repairs vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete including , P/S traps, complete all as specified and directed. |
| 34 | S & F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), complete all as specified and directed. |
| 35 | S & F plastic water closer seat, white, closed pattern with flat bottom, and cover and chromium plated or aluminised hinging device, complete all as specified and directed. |
| 36 | S & F in repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle, complete all as specified and directed. |
| 37 | S & F in repairs 15mm bore Pillar taps swan neck with flange, cast copper alloy chromium plated, fancy type, screwed down screwed for iron pipe, complete all as specified and directed. |
| 38 | S & F in repairs 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 39 | S & F in repairs tubular towel rail, 20mm dia, D type, 60cm long between flanges including screws for fixing, complete all as specified and directed. |
| 40 | S & F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 41 | S & F in repairs bib taps, cast copper alloy chromium plated fancy type, crewed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 42 | S & F for 15mm dia bore angle stop valve/ stop valves, cast copper alloy chromium plated fency type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and directed. |
| 43 | S & F for 15mm dia bore stop valves with long shank and cup (concealed type), cast copper alloy chromium plated fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and directed. |
| 44 | S & F in repairs brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed. |
| 45 | S & F PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed. |
| 46 | S & F for grating doom 100mm dia of PTMT (Minimum weight 25gms, complete all as specified and directed. |
| 47 | S & F in repairs vitreous china urinal, full stall type, vitreous china urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed. |
| 48 | Cutting holes of superficial area n. exc 150 Sq. cm into or through brick walls built in cement mortar, complete all as specified and directed. |
| 49 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 50 | M & L for RCC (nominal mix) type B1 (1:2:4) (using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 51 | M & L for use and waste of timber as in form work(rough finished surfaces of concrete) to flat surfaces of soffits and sides of suspended shelves and similar work etc; complete all as specified and directed. |
| 52 | M & L for mild steel TMT bars 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips), complete all as specified and directed. |
| 53 | M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed. |
| 54 | M & L for Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 55 | M & L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed. |
| 56 | M & L for brickwork with fly ash bricks (old size bricks) in cement mortar (1:6), straight or curved on plan exc 6 m mean radius, complete all as specified and directed. |
| 57 | S & F for 4 mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and directed. |
| 58 | S & F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 59 | S & F for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed. |
| 60 | Taking down cement plaster in any description and in any position, complete all as specified and directed. |
| 61 | M & L for rendering 10mm thick in CM (1:6) on fair faces of brick/ concrete surfaces and finished the surfaces even and fair, complete all as specified and directed. |
| 62 | M & L for rendering 15mm thick in CM (1:6) as in under layer and 5 mm thick in CM (1:4) water proofing compound as per manufacturers instruction on fair faces of brick/ concrete surfaces and finished the surfaces even and fair, using with , complete all as specified and directed.Note: Water proofing compound shall be measure and paid separately. |
| 63 | M & L for preparation of old decorated surfaces of wall complete removal washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of oil bond distemper, complete all as specified and directed. |
| 64 | M & L for preparation of old decorated surfaces of ceiling surfaces and applying two coats of white wash, complete all as specified and directed. |
| 65 | Taking down eaves gutters and rainwater pipes/ SWR pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 66 | S & F for 110 mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints solvent cement, laid in trenches or in floors, complete all as specified and directed. |
| 67 | S & F for 110 mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints solvent cement, fixed on walls, complete all as specified and directed. |
| 68 | S & F for 75 mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints solvent cement, laid in trenches or in floors, complete all as specified and directed. |
| 69 | S & F for 75 mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, fixed on walls, complete all as specified and directed. |
| 70 | S & F for stack clamp 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts snd nuts and securing ends of stays to wall or roof for pipe 110mm, complete all as specified and as directed. |
| 71 | S & F for stack clamp 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts snd nuts and securing ends of stays to wall or roof for pipe 75mm, complete all as specified and directed. |
| 72 | S & F for PVC (SWR) bends 110mm bore setting and jointing to solvent cement complete all as specified and as directed. |
| 73 | S & F for PVC (SWR) Tee equal or unequal for 110mm bore pipe with access door setting and jointed with solvent cement, complete all as specifed and as directed. |
| 74 | S & F for PVC (SWR) vent cowl 110 mm dia bore setting and jointed with solvent cement, complete all as specifed and as directed. |
| 75 | S & F for PVC(SWR) Tee equal or unequal for 75mm bore pipe with access door setting and jointed with solvent cement, complete all as specifed and as directed. |
| 76 | S & F PVC (SWR) 75mm dia bore floor trap with grating including jointing to solvent, complete all as specified and directed. |
| 77 | S & F for PVC(SWR) bends 75mm bore setting and jointing to solvent cement complete all as specified and directed. |
| 78 | S & F for PVC (SWR) vent cowl 75mm dia bore setting and jointed with solvent cement, complete all as specifed and directed. |
| 79 | M & L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new surfaces all as specified and as directed. |
| 80 | S & F for PVC SWR gully trap 125/110 mm setting in cement mortar and jointed with solvent cement, complete all as specified and as directed. |
| 81 | S & F for 40 mm dia Low Density Poly Ethylene pipes (LDPE) of pressure rating 6 Kgf/cm2 fixed complete to walls, ceilings or in floors etc, complete all as specified and directed. |
| 82 | E/M PORTIONTaking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc all as specified and as directed. |
| 83 | M & L for wiring complete with 1.5 Sqmm single core FRLSH PVC insulated unsheathed cable 1100 volts grade, multistranded with copper conductors conforming to IS specifications, drawn through and including non metallic rigid PVC conduit, PVC conduit fittings and conduit accessories concealed on wall, making good disturbed surfaces of walls and fixed on ceiling etc with suitable clamps, screws, etc for housing the switches, switch sockets outlets, fan regulators, etc, including provn of 1.5 sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly all as specified and as directed :-(a) One light point controlled by one switch |
| 84 | (b) One Exhaust fan point controlled by one switch |
| 85 | Description all as per item No 83.00 herein before but wiith 4 Sqmm single core PVC cable for one 3 pin 15 Amps switch socket outlet on independent board complete all as specified and as directed. |
| 86 | Taking down sub main wiring (or) power wiring complete upto 2 runs of 4 Sqmm in PVC conduit or Concealed removing to stores or taken as credit and making good the disturbed surfaces of wall, etc all as specified and as directed. |
| 87 | M & L for sub main wiring with PVC insulated, 1100 volts grade single core FRLSH multistranded copper conductor cable conforming to IS specifications, 2 runs of 4 Sqmm including one run of 4 Sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories incl accessories fixed on concealed in wall, making good disturbed surfaces on walls and connecting to common earth dolly all as specified and directed. |
| 88 | S & F in repairs ceiling rose surface bakelite 65mm x 50 mm two to three terminals all as specified and as directed. |
| 89 | S & F in repairs modular switch flush DIRECT TO FIT press type 10 Amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed. |
| 90 | S & F in repairs modular switch flush DIRECT TO FIT press type 16/20 Amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed. |
| 91 | S & F in repairs modular socket flush DIRECT TO FIT press type 16/20 Amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed. |
| 92 | S & F in repairs modular white cover with plate with frame 2 module incl flush box matching with white cement wk if necessary all as specified and as directed. |
| 93 | S & F in repairs modular white cover with plate with frame 3 module incl flush box matching with white cement wk if necessary all as specified and as directed. |
| 94 | S & F in repairs modular white cover with plate with frame 8 module incl flsh box matching with white cement wk if necessary all as specified and as directed. |
| 95 | S & F in repairs MCB DB, 240 volts single pole and neutral, double door, sheet steel, enclosure powder coated with 63 Amps rated busbar with neutral link, 8 ways SPN double door, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. |
| 96 | S & F in repairs MCB SPN, 240 Volt, 32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one complete all as specified and directed. |
| 97 | S & F in repairs MCB SP, 240 Volt, 6-32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one all as specified and directed. |
| 98 | S & F in repairs 40W LED aluminium battens high wattage decorative ultra slim polycarbonate LED lighting fixture with high lumen output, environmental friendly, energy efficient complete all as specified and as directed. |
| 99 | S & F in repairs 10W LED battens decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly energy efficient complete all as specified and as directed. |
| 100 | Taking down old exhaust fan and kept in MES store where as complete all as specified and as directed. |
| 101 | S & F in repairs / replacement exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 200mm complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 25, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 02, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedOct 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender