Tender For Special Repairs To Outlet Shutter At Ls 4023M And Flood Protection Wall From Ls 4000M To 4043M In Kolinjivadi Old Channel In Dharapuram Taluk Of Tiruppur District..
Tender Value
5.92 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
11 days left
EMD
6000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruppur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Outlet Shutter At Ls 4023M And Flood Protection Wall From Ls 4000M To 4043M In Kolinjivadi Old Channel In Dharapuram Taluk Of Tiruppur District..
BOQ
| Sl. No. | Item Description |
| 1 | Clearing the Light jungle and destroying the same effectively etc., complete complying with standard specification and as directed by the departmental officers |
| 2 | Dismandling the existing old Random Masonry in Cement Mortor walls under 3m high and as directed by the Departmental officers. |
| 3 | Earth work excavation for open foundation and depositing on bank with initial lead of 10m and initial lift of 2m in hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel stoney earth and earth mixed with small size boulders and as directed by the departmental officers. |
| 4 | Providing and placing Plain Cement Concrete M7.5 grade designmix using crusher broken hard coarse aggregate (well graded) of nominal maximum size of 40mm to I.S specified grading (To achieve the specified characteristic strength of 7.5N/mm2 in 28 days) and mixing the ingredients in approved mixer including dewatering of the placement site by baling / pumping and diverting wherever necessary, placing concrete in layers, water curing, finishing the surface with all leads and lifts etc., complete. as directed by the Engineer in charge of works |
| 5 | Random Rubble masonry in Cement Mortar 1:4(One part cement and four part M sand) using stones including simultanious pointing, curing, finishing etc., complete complying with standard Specification and as directed by the departmentel officers. |
| 6 | Old Stone |
| 7 | New Stone |
| 8 | Plastering with Cement Mortor 1:3 (One Cement and Three P-Sand) to 20mm thick incl including finishing and curing etc., Complete complying with standard specification and as directed by the departmental officers. |
| 9 | Pointing with cement mortar 1:3 (One cement, three P- Sand) including curing, finishing etc., and as directed by the departmental officers. |
| 10 | Earth work excavation and depositing on bank in hard red earth, shales, murram and earth mixed with small size boulders and hard gravely soil and conveying the same by lorries with a lead of 1 Km CT including unloading and spreading etc. complete complying with standard specification and as directed by the departmental officers. |
| 11 | Fabricating supplying and erection of Screw gearing steel shutters of size above 1.00m and upto 2.00m width consist of skin plate made out of 8mm thick mild steel plate and horizontally stiffened with 100x50mm mild steel channel at an interval not more than 0.50m and vertical stiffeners made out of same section at an interval not more than 0.60m and provided with 8mm thick mild steel gusset plate of required size on both sides fastened with rust free bolts and nuts etc. Conveying the fabricated shutter by using lorries including loading, unloading and leading the shutter to the vent, Dismantling the eroded shutter and shuttering arrangements by using necessary gas cutting equipment. Erecting the new shutter and the shuttering arrangements in the vent in proper position by using necessary hoisting equipment. The shutter shall be painted with two coats of Anticorrosive black paint over one coat of Red Oxide Primer The rate including cost of materials consumables, labours power charges, conveyance charges for all equipment required conveying the dismantled materials to the section stores, cost of petty civil works, trial operation of shutter and warranty for 5 years etc., complete complying with standard specification and as directed by the departmental officers. |
| 12 | Fabricating, supplying ad fixing of 50mm dia Screw Rod made up of Mild steel duly machined and fully threaded to suit the Head set Assembly and provided with required holes, Conveying and leading the screw rod to the worksite. Fixing the screw rod to the shutter gusset plate with required bolt and nut in proper alignment to the head set including dismantling the existing damaged screw rod, conveying and stacking at section store. The screw rod should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, labours, charges for all fabricating and hoisting equipments, conveyance charges for labours and materials and warranty for 5 years etc., complete and as directed by the departmental officers. |
| 13 | Fabricating, supplying and fixing of shutter Groove Angle made up of 65x65x6mm Mild Steel angle for required height including welding hold fast of size 25x25x6mm Mild steel angle 2 Nos on both sides and conveying and leading the groove angle to the vents. Fixing the angle to the grooves in proper alignment including dismantling the existing damaged groove angles, conveying and stacking at section store. The groove angle should be painted with two coats for AC black paint over on coat of red oxide primer. The rate including cost of materials, consumables, labours charges for all fabricating and hoisting equipments. conveyance, petty civil works and warranty for 5 years etc., complete complying with standard specification and as directed by the departmental officers. |
| 14 | Total Civil Works |
| 15 | GST (18%) (CGST 9 % + SGST 9% ) |
| 16 | Grand Total Value Put to Tender Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender