Tender For Design Supply Installation Testing And Commissioning Of Fire Alarm System In Rbsc, Chennai
Tender Value
15.45 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
16 days left
EMD
30900
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Design Supply Installation Testing And Commissioning Of Fire Alarm System In Rbsc, Chennai
BOQ
| Sl. No. | Item Description |
| 1 | Lot Name |
| 2 | Supply, Installation, Testing and Commissioning of Microprocessor based on one loop with expandable provision of additional 3 loops, Networkable analogue addressable Fire Alarm Control Panel (FACP) with redundant panel. The Panel shall have minimum 640-character LCD / LED display or touchscreen. Each loop shall have a capacity of minimum 250 analog addressable detectors / devices. It shall have multi access levels, flash EPROM and should be operated on 240 volts AC power supply, (UPS supply will be given by the Bank). Automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and then be capable of operating the system for 30 Minutes during an emergency condition.Fire Alarm Control Panel shall also be supplied with all the required gateways like Modbus BACnet, etc., and the required hardware, software, Application Program Interface (API), Software Development Key (SDK), etc., to communicate on open protocol such as Modbus / BACnet etc. for connectivity with the Command and Control Centre.Cost of FAS panel shall include all the Loop cards, Interface cards, control cards, power control cards, etc.The Panel shall be listed for UL864, 9th Edition / EN 54 and comply fully with the detailed specifications set out in Part I of the tender. |
| 3 | Supply, Installation, Testing and Commissioning of Repeater Panel complete with minimum suitable display or touchscreen to indicate the status of system and location of incident, etc., back-box and control function. It shall be UL / EN 54 & VDS approved. The LCD shall display all events / detectors, devices status of complete systems in the networked, The NRP shall be equipped with QWERTY Keypad. Mounting options include an annunciator box, and blank modules are required for mounting the Panel and comply fully with the detailed specifications set out in Part I of the tender |
| 4 | Multi sensor detector below false ceilingSupply Installation testing and Commissioning (SITC) of Intelligent analog Addressable type multi sensor detector below false ceiling (Photo + Fixed Temp. + Rate of Rise Temp.) with inbuilt Isolator / isolation module as per NBC / NFPA latest guidelines along with base for use as heat or smoke or combined both, analogue addressable, microprocessor type with operating temperature from -20⁰C to + 55⁰C. Detector shall have auto learn, drift compensation with both automatic electronic addressing or dip switch addressing, termination lugs, glands etc. It shall be UL / EN approved. Works include providing mounting boxes, indicating leds complete as required for below false ceiling and work to be executed as per the engineer directions along with the detailed specifications set out in Part I of the tenderSupply Installation testing and Commissioning (SITC) of Intelligent analog Addressable type multi sensor detector below false ceiling (Photo + Fixed Temp. + Rate of Rise Temp.) with inbuilt Isolator / isolation module as per NBC / NFPA latest guidelines along with base for use as heat or smoke or combined both, analogue addressable, microprocessor type with operating temperature from -20⁰C to + 55⁰C. Detector shall have auto learn, drift compensation with both automatic electronic addressing or dip switch addressing, termination lugs, glands etc. It shall be UL / EN approved. Works include providing mounting boxes, indicating leds complete as required for below false ceiling and work to be executed as per the engineer directions along with the detailed specifications set out in Part I of the tender |
| 5 | Supply Installation testing and Commissioning (SITC) of Intelligent analog addressable type multi sensor detector above false ceiling i.e. in the true ceiling (Photo + Fixed Tempt. + Rate of Rise Temp.) with inbuilt Isolator / isolation module as per NBC / NFPA latest guidelines along with base for use as heat or smoke or combined both, analogue addressable, microprocessor type with operating temperature from -20⁰C to + 55 ⁰C. Detector shall have auto learn, drift compensation with both automatic electronic addressing or DIP switch addressing, termination lugs, glands etc. It shall be UL / EN approved. Works include providing mounting boxes, indicating leds complete as required for above false ceiling/ true ceiling etc and work to be executed as per the engineer directions along with the detailed specifications set out in Part I of the tender. |
| 6 | Supply, Installation, Testing and Commissioning of intelligent Analog Addressable Rate of rise cum fixed temperature detector with inbuilt Isolator / isolation module as per NBC / NFPA latest guidelines along with mounting base, LED indicators complete as required BELOW FALSE CEILING / TRUE CEILING. It shall be UL/EN approved. Works include providing mounting boxes, indicating leds, with both automatic electronic addressing or DIP switch addressing etc, complete as required for above false ceiling / true ceiling etc and work to be executed as per the engineer directions along with the detailed specifications set out in Part I of the tender.Supply, Installation, Testing and Commissioning of intelligent Analog Addressable Rate of rise cum fixed temperature detector with inbuilt Isolator / isolation module as per NBC / NFPA latest guidelines along with mounting base, LED indicators complete as required BELOW FALSE CEILING / TRUE CEILING. It shall be UL/EN approved. Works include providing mounting boxes, indicating leds, with both automatic electronic addressing or DIP switch addressing etc, complete as required for above false ceiling / true ceiling etc and work to be executed as per the engineer directions along with the detailed specifications set out in Part I of the tender. |
| 7 | Supply, Installation, Testing and Commissioning of Addressable Dual Action Manual Call Station Unit with lock and key with back box,. It shall be UL / EN approved. Cost of all the accessories including back mounting boxes , support etc required for fixing of this device on concrete wall / wall panels, termination of cables, glands , lugs & clamps, necessary routing pipes in concealed fashion / in surface type etc have to be included in the rate quoted and work to be executed as per the engineer directions along with the detailed specifications set out in Part I of the tender. |
| 8 | upply, Installation, Testing and Commissioning of Addressable Hooter cum Strobe Lights with 110 cd complete with modules. Cost of all the accessories including back boxes, required modules at FAS panels, etc., required for fixing of hooter on wall/ concrete roof / false ceiling, required accessories for termination of cables, routing pipes, support clamps, lugs and glands etc etc., complete have to be included in the rate quoted and comply fully with the detailed specifications set out in Part I of the tender. |
| 9 | Supply, Installation, Testing and Commissioning of Response Indicator (RI) with dual LEDs. Cost of all the accessories required like boxes, back plate, for fixing of RI on wall/ concrete roof / false ceiling termination of cable, etc required accessories, etc., complete have to be included in the rate quoted and comply fully with the detailed specifications set out in Part I of the tender. |
| 10 | Addressable control and relay Modules: Supply, Installation, Testing and Commissioning of Addressable Control / relay Modules for Control Dampers, lift system, etc., Cost must include all the accessories, control / monitor / Interface cards, interoperability relays, control relays, contactors, etc., in complete operable condition and comply fully with the detailed specifications set out in Part I of the tender |
| 11 | Supply and laying of 2x1.5 sq.mm armoured RED coloured FRLS strandard twisted copper conductor cable for Fire alarm Loop (A type), etc., on ceiling / walls / trays including concealed drops with all accessories hardware, (eg. Required support clamps, lugs, cable numbering plates, saddles, spacers, glands, etc.) and fixing materials including civil works making drill, holes and as directed by the Bank’s engineer and as per the site requirements. Further, it shall comply fully with the detailed specifications set out in Part I of the tender. |
| 12 | Same as above, but in underground manner by excavation at minimum two feet below soil, by providing 2 inch (50 mm) GI B Class pipe, connectors, L bend, couplers, etc., and other required accessories shall be included |
| 13 | Removal of old fire alarm system damaged existing fire cable and testing and checking of old cables healthiness and reuse of the same old cable. |
| 14 | Rebate for dismantling and taking away old fire alarm system (Ravel make) including old detectors, main panel, hooters, MCPs, etc., removal including only those damaged fire alarm cables after commissioning and stabilization of new fire alarm system. |
| 15 | Comprehensive Annual Maintenance Service (CAMC) charges for the entire fire alarm system including main fire alarm panel, all kind of fire devices and cabling, spares, labour, upgradation of software, repeater panel etc. The rate shall be valid for first year after initial guarantee period of one year. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender