Tender For Construction Of R For Cwsn Students At Bbmb Dav Public School Talwara
Tender Value
21.74 Lakhs
Estimated cost
Bid Submission
25 Sep 2026
10 days left
EMD
22000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hoshiarpur → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of R For Cwsn Students At Bbmb Dav Public School Talwara
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2 Mtr. Depth including dressing of bottom and sides of trenches stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm layer with compaction including disposal of all surplus soil as directed with in lead of 30 Mtr.(CSR item No 6.6) |
| 2 | Cement concrete 1:4:8 With stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type [CSR item No.-10.11 (b) ] |
| 3 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.(CSR Item no.10.15) |
| 4 | 40mm thick cement plaster D.P.C. 1:3 with admixture of water proofing compound @1kg /bag of cement (CSR Item no.15.51) |
| 5 | First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth(CSR 11.7) |
| 6 | First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level (CSR item no.11.8) |
| 7 | Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete.(CSR Item no.18.18) |
| 8 | Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.( CSR Item no.9.8) |
| 9 | Precast chequred tiles of 20mm minimum thickness in ordinary grey cement without chips laid on 20mm thick bed of cement mortar 1:3 with neat cement slurrybetween joints and over the base for floors, treads of steps and landings .(CSR Item no.14.59) |
| 10 | 12.5 mm thick cement plaster 1:3.(CSR Item no.15.8) |
| 11 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish (CSR Item No.16.65) |
| 12 | Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm.(CSR Item no.16.59).A&C-1 |
| 13 | Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position.(CSR Item no.18.4) |
| 14 | Providing & fixing 16 gauge stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainless steel pipe, Balusters of 40mm dia Stainless steel pipe and guard 3Nos of 15mm dia Stainless Steel pipe completed.(CSR Item no.18.39) |
| 15 | Providing and fixing ( PPGL) precoated painted galvalume sheet roofing (size, shape and pitch of corrugation as approved by Engineer-in-charge) The end rib shall have anti cappillary groove and return leg. The steel sheet must be having yield strength of 550 MPa ( Fy= 550 MPa) metallic coated with Zinc- Aluminium alloy ( i.e. 55% Al, 43.4%Zinc, 1.6% Si-Zincalume) AZ150 ( Min. 150 bm/mm2 total on both sides), pre painted with super Durable Polyster XRW quality paint includes inorganic infrared reflective pigment. The sheet confirms to general requirement of AS/NZS 2728 type 4/ IS 15965 class 3 durability and gloss value of 25%-40%. should be supplied in single length upto 12 metre or as desired by Engineer-incharge. The sheet shall be fixed using self drilling /self tapping screws of size (5.x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.50 mm (+ 0.05 %) thick.(CSR Item no.13.27(iii)a) |
| 16 | Providing and laying 60mm thick factory made cement concrete interlocking Paving blocks of M35 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concreteasper IRC SP63-2014 andof approved size and design/ shape laid in Ordinary Grey Colour and pattern over and including40mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in Charge. (CSR Item no.14.138) |
| 17 | Providing and fixing in position SS Grab Bar Grade 304 of approved make (to the approval of the Engineer-in-charge) fixed in to wall with brass screws complete in all respect. 35mm dia 225mm (9”)long (CSR Item30.13a) |
| 18 | Providing and fixing in position SS Grab Bar Grade 304 of approved make (to the approval of the Engineer-in-charge) fixed in to wall with brass screws complete in all respect.35mm dia 600mm (24”) long (CSR Item30.13) (d) |
| 19 | Providing and fixing in position SS Grab Bar Grade 304 of approved make (to the approval of the Engineer-in-charge) fixed in to wall with brass screws complete in all respect.35mm dia 1200mm (48”) long (CSR Item30.13)(f) |
| 20 | Providing and fixing in position SS Grab Bar Grade 304 of approved make (to the approval of the Engineer-in-charge) fixed in to wall with brass screws complete in all respect. Foldable U Type 762mm long (CSR Item30.13)(g) |
| 21 | Providing & fixing in position Water Cooler without Stablizer of approvedmake (to the approval of Engineer-in-charge ) including carriage complete in all respect. Water Cooler Full Steel Body 40/80 ltr Capacity without Stablizer. (CSR Item no. 30.25 a) |
| 22 | Providing & fixing in position Commercial RO without reservoir with four no cartridge/ membranehaving flow rate 50 ltr/hr with 6 stage purification process of approved make (to the approval of Engineer-in-charge ) including carriage and fixing in position complete in all respect.(CSR Item no. 30.27) |
| 23 | Providing & placing in position on terrace (at all floor levels) HDPEwater storage tanksof approved make (to the approval of Engineerin-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. CSR Item no. 30.97 A (i) Triple Layer Tanks |
| 24 | Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect. (CSR Item no.30.98) G.I. tank nipple 25mm i/d Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender