Tender For providing Electrical Infrastructure For Bts At Laxmanpur, Shaheed Dweep (Neil Island) Under Phase Ix.2, Andaman And Nicobar Islands.
Tender Value
4.90 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
7 days left
EMD
9817
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for providing Electrical Infrastructure For Bts At Laxmanpur, Shaheed Dweep (Neil Island) Under Phase Ix.2, Andaman And Nicobar Islands.
BOQ
| Sl. No. | Item Description |
| 1 | Earthing with Galvanized Iron Earthing Electrode, 1 Metre Length and 40mm diametre, Contains 1 metre of GI Strip 32mm Size, Electrode filled with bentonite clay, and filling the pit with 25 Kg bentonite compound, etc, providing masonry enclosure with cover plate, complete as required. (As per RDSO specification) |
| 2 | Providing masonry enclosure with cover plate having locking arrangement and 40 mm dia GI watering pipe of 2.7 metre long for earthing pit, etc as required. |
| 3 | Providing and fixing of lightning conductor finial, made of 25 mm dia 300mm long, G.I. tube, having single prong at top, with 85mm dia 6mm thick G.I. base plate including holes etc. complete as required |
| 4 | Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. |
| 5 | Providing and fixing 25 mm X 6 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 6 | Providing and fixing 25 mm X 6 mm G.I. strip on surface or in recess for connections etc. as required |
| 7 | SITC of LED type aviation light made of cast aluminum base, comprising of dome shaped, thick clear glass cover, cylindrical shaped, consist of LED lamps to give a light intensity not less than 10 candelas i/c S/F of power pack, with photo sensor for switching on and off, pdg necessary MS frame & tube for fixing the fitting on top of the tower, connection etc complete as reqd. (Make: BSNL approved make) |
| 8 | Supplying of PVC insulated and sheathed armoured 2 core 1.5 sq.mm copper conductor 1.1 KV grade cable and laying the same on surface or in recess as reqd.(BSNL approved make). |
| 9 | Supplying and making end termination with brass compression gland for PVC insulated and sheathed copper conductor cable of 1.1 KV grade of size 2 core 1.5 sq.mm as reqd. |
| 10 | Suppying and fixing of SMC energy meter box ( 650x350x250 mm ) on the surface of wall or frame with suitable nuts and bolts , and comprising of 3 nos 63A, procelain cutout fuse, interconnection, complete as reqd. |
| 11 | Wiring for circuit / submain wiring along with earth wire with the following sizes of PVC insulated copper conductor single core cable in surface/recessed PVC conduit as required. (4 x 10 Sq mm + 2 x 6 sq.mm) |
| 12 | Supplying and fixing of following ways surface/ recess mounting, Vertrical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required .(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) = 4 way (4 + 12), double door |
| 13 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. A) Single pole |
| 14 | b) Triple pole |
| 15 | Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required [100 amps] |
| 16 | Supplying and fixing rewireable type SFU, 63A, 415V, 50 Hz, with side handle operation, in SS enclosure, including connection etc. as required |
| 17 | Supplying and making end termination with brass compression gland for PVC insulated and sheathed Alluminium conductor cable of 1.1 KV grade of size 3½ x25 sq.mm Al as reqd. |
| 18 | Supply and laying of PVC insulated and sheathed armoured 3½ x25 sq.mm Al. armoured conductor, 1.1 KV grade cable on surface, or in air with proper support and fastening, complete as reqd.(ISI marked). |
| 19 | SITC of Feeder pillar of App : size (1100mmx650mmx250mm) for 415V, 50Hz, a.c.supply, fabricated by 16 SWG GI sheet and providing hinged type single door with double locking arrangement both with screw handle and pad lock provision, with sloping top, earthing studs,knockout holes on the bottom side for cable entry and M.S. angle iron on all sides for support and 4 nos angle iron at the bottom with leg of suitable size and length and fixing the same on floor through suitable fastner the feeder pillar shall comprise the following switch gears and accessories i/c inter connection complete as reqd. |
| 20 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching by breaking the concrete and re-filling/making good etc as required (40 mm) |
| 21 | Supplying & fixing of exhaust fan 380 mm sweep, with 1400 rpm, 230V, 50Hz, including making openings on walls and properly fastening with fastners and GI strips , i/c making connection, testing, commissioning, sealing the leaks for preventing entry of rain water, etc. as required. ( Make Havells or SS) |
| 22 | Supplying & fixing of Exhaust fan Controller for operating 2 Units in desired time and sequence, with monitoring of room temperature for its operation, including making all electrical connections , etc. as required. |
| 23 | Pdg. CO2 type Fire Extinguisher of 4.5 KG capacity conforming to IS : 2878 made from seamless cylinder duly approved by Chief controller of explosive, Nagpur fitted with ISI marked control valve, high pressure 1 mtr long discharge hose and horn complete with initial gas charged with carrying handle and wall mounting bracket. (BSNL approved make) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender