Tender For Addn/ Altn To Office Of So To Comdt, Provn Of Entrance Gate & Sentry Box At Drona Offrs Mess, Addn/ Alteration Of Ladies Toilet In Air Wg, Addn/Altn To Room No 2 In Bldg No 59 And Provn Of Covered Passage Connecting Mi Room To Trishakti At
Tender Value
43.50 Lakhs
Estimated cost
Bid Submission
07 Oct 2026
3 days left
EMD
87000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nilgiris → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/ Altn To Office Of So To Comdt, Provn Of Entrance Gate & Sentry Box At Drona Offrs Mess, Addn/ Alteration Of Ladies Toilet In Air Wg, Addn/Altn To Room No 2 In Bldg No 59 And Provn Of Covered Passage Connecting Mi Room To Trishakti At Dssc Wellington
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 15-Sep-2026 | 8696 Corrigendum | Other | 25-Sep-2026 |
| 2 | 25-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 02-Oct-2026 |
| 3 | 02-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of stone slab,floor hearth or wall tiling laid bedded and pointed in any mortar (but not backing) complete all as specified and directed. |
| 2 | Demolition of cement concrete (unreinforced ) of any description and in any postion not otherwise spcifically provided etc (below or above ground level)as in floors etc and removing debris off the site complete all as spcified and as directed. |
| 3 | Taking down chowkats or frames including shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm complete all as specified and directed. |
| 4 | Taking down chowkats or frames including shutters (without taking off shutters from the frames) exceeding 1.50 Sqm and not exceeding 4 Sqm each, complete all as specified and directed. |
| 5 | Dismantling boarding/partition , any description, fixed in any position with screws all as specified and directed |
| 6 | Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed. |
| 7 | Taking down wall panelling and similar works |
| 8 | M&L for Precast cement concrete block Type C1(1:3:6)(using 20 mm graded aggregate) masonry with solid solid blocks exc 10cm width and setting in mortar(1:6) complete. |
| 9 | Material and labour for Rendering in Cement Mortar ( 1:6) 15 mm thick on stone masonry or other than fair faces of brick work wall surfaces, finished even and smooth without using extra cement complete all as specified and as directed. |
| 10 | M&L for preparation of new surfaces of walls and applying with white putty of average thickness 1mm and making the surface to an even and smooth finish by rubbing with sand paper of different grade etc and applying two coats of Oil bound distermper over a coat of primer by approved applicator of the manufacturer of the paint and all as specified and as approved. |
| 11 | Material and labour for Factory made UPVC white colour sliding two track Windows with glazing all as per manufacturer's direction and following specifications :- (i) The profile for constr of UPVC window frame shall be uPVC material conforming to 10151 . (ii) The frame shall be made of extruded uPVC section having overall diamension of 65mmx 50mm having wall thikness 2mm ± 0.2mm.(iii) The corners of wall frame shall be joint by MS galavanised brackets ,joints,mittred and plastyic weleded. (iv) The hinge side vertical outer frame shall be reinforced with galvanised MS tube of wall thicknesss 1mm ± 0.1mm and the tie rod shall be provided at the bottom of thge frame.(v) The profiles should be sigle chamber system which shall provide high insulation properties. (vi) The window system should be glazed with 5mm thick plain glass fixed in window frame as per manufactures instruction. Make : AMD overseas Ltd/ Fenesta/Qute/Sarvesh Multi Plast India Ltd /SMP Impex/H2O Solution. Note: The entire fixing shall be done with as per manufactures instruction and specification and as directed. |
| 12 | Supply and fix UPVC Partition consisting of 7mm thick coloured solid UPVC ply sheet reinforced with frame work made from 60mm x 60mm Casement frame including necessary drilling,jointing and fill the gap with necessary solvent,and fixing all required cleats,brackets ,channels etc all as specifed and directed by the Engr- in -Charge. Make : AMD overseas Ltd/ Fenesta/Qute/Sarvesh Multi Plast India Ltd /SMP Impex/H2O Solution. Note : Partition shall be designed according to the approval of GE and the cost shall be deemed with cost of neccesary glass/PVC panelling according to the design) Please Enable Macros to View BoQ information |
| 13 | Supply and fix UPVC Partition consisting of 7mm thick coloured solid UPVC ply sheet reinforced with frame work made from 60mm x 60mm Casement frame including necessary drilling,jointing and fill the gap with necessary solvent,and fixing all required cleats,brackets ,channels etc all as specifed and directed by the Engr- in -Charge. Make : AMD overseas Ltd/ Fenesta/Qute/Sarvesh Multi Plast India Ltd /SMP Impex/H2O Solution. Note : Partition shall be designed according to the approval of GE and the cost shall be deemed with cost of neccesary glass/PVC panelling according to the design) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 02, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 25, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 02, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 07, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender