Tender For Special Repairs To Drainage System Along With Allied Works At Jacaranda Lane 1 To 3, special Rep To Flooring At Certain Places At Iscoyd And Certain Revenue And Minor Works At Dssc Wellington
Tender Value
42 Lakhs
Estimated cost
Bid Submission
25 Sep 2026
12 days left
EMD
84000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nilgiris → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Drainage System Along With Allied Works At Jacaranda Lane 1 To 3, special Rep To Flooring At Certain Places At Iscoyd And Certain Revenue And Minor Works At Dssc Wellington
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work/PCC block masonry/stone masonry etc built in cement mortar, incl all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc complete all as specified and as directed |
| 2 | Demolition of Concrete (Unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed |
| 3 | M&L for precast cement concrete solid building blocks masonary exc 10 cm in width and setting in cement mortar 1:4, type C-1, 1:3:6 (20 mm graded agregate ) complete all as specified and as directed |
| 4 | M&L PCC 1:2:4 Type B0 using 12.5mm graded aggregate as in haunching/coping smooth finished as required. complete all as specified and as directed |
| 5 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls (110mm bore) in repairs complete all as specified and as directed |
| 6 | Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tank similar work conforming to Fe.290.Gde-E-165 complete all as directed. |
| 7 | Rendering 15mm thick in cement mortar 1:4 on fair face of stone surfaces /brick finished even and smooth without to using extra cement complete all as specified and as directed |
| 8 | M&L for preparation of new plastered external surfaces and appying two coats of cement based paint over on coat of primer on the surface of wall as required all as specified |
| 9 | M&L hardcore of gauge n.exc 63 mm deposited, spread & levelled in layers n. exc 15 cm thick, watered & rammed to a true surface with broken stone or boulders complete as specified and as directed. |
| 10 | M& L for 75mm thick PCC type C-2(1:3:6) using 40mm graded stone aggregate as in pavings,floor etc etc including finishthe surface even and fair without using extra cement complete all as diercted. |
| 11 | M&L Chequerd cement concrete coloured tiles 300 x 300x 25 mm thick set jointed in neat cement slurry in floors with grey cement & pigment including 15 mm thick screed bed in cm 1:6 complete all as specified and as directed |
| 12 | M & L for plain cement concrete type-C2, 1:3:6 (40mm garaded agg.) in surface channel and drains complete all as specified and directed |
| 13 | M&L extra for forming fair finished drain or channel any girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc complete all as specified and directed |
| 14 | M&L for preparation existing treatment on external surfaces of wall and applying one coat cement based paint including filling cementious wall care putty on disturbed portion of wall as required complete all as specified and as directed |
| 15 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 16 | Dismantling timber scantlings 40 sq. cm and over in section, in any position as in unframed work such as rafter,beam etc complete all as specified and as directed |
| 17 | M&L for approved earth filling in floors or pavings, laid in layers exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed |
| 18 | M&L 75mm thick PCC 1:4:8 type D2 (40 mm graded aggregate) as in Sub base floor finished even and fair as in sub base of floor etc all as specified and as directed |
| 19 | M&L Providing 25mm thick cement concrete type B0, 1:2:4 using 12.5 mm graded stone aggregate .as in floors for levelling course including finish the surface |
| 20 | M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in Cement Mortar 1:3 complete all as specified and as directed. |
| 21 | M&L for Laminated 8 mm thick pre-Engineered laminated wood for floors of any clour and design (as approved by GE) fixed over and including 12mm thick plywood and 1/2 mm thick foam fixed in floor as per manufacturers instructions and as directed.. Make : Sapphire,Terazzo or equivalent |
| 22 | All as per item No 21 above but set and jointed as in vertical surfaces such as skirting complete all as specified |
| 23 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 24 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings |
| 25 | Taking down chowkats or frames exc 1.5 but n.exc 4 Sqm each with shutters(without taking off shutters from the frames) complete. |
| 26 | Excavating in trenches, exc 1.5 m wide and n exc 3 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and exc 1.5 m but n.exc 3m in depth and getting out in soft soil |
| 27 | M&L for Cement concrete type D-2 1:4:8 using 40mm graded aggregate in foundations, filling and mass concrete complete all as specified and as directed |
| 28 | M&L Pre-cast cement concrete block masonry with solid blocks type C-1, 1:3:6 (using 20mm graded aggregate) , exc. 10 cm in width and setting in mortar 1:6 complete all as specified and directed. |
| 29 | M&L for rendering 10mm thick on brick/concrete surface in CM 1:6 to wall finished even and smooth without using extra cement all as specified and as directed |
| 30 | M&L for 15 mm thick rendering in cement mortar 1:4 on brick work/concrete surfaces of wall, finished even and smooth with out using extra cement and mixed with Water Proofing compound including scaffolding complete all as specified and as directed.Note: WPC shall be measured and paid seperatly. |
| 31 | Supply only integral water proofing compound complete all as specified and as directed. |
| 32 | M&L for two coats of oil bound distemper on cement plaster over a coat of primer after preparation of surface on wall all as specified and directed. |
| 33 | M&L for painting to cement plaster surfaces with two coats of cement base paint over a coat of alkali resistant primer after preparation of surface all as specified and as directed |
| 34 | M&L for 150mm thick Cement concrete 1:4:8 type D- 2, (40mm graded aggregate in floor complete |
| 35 | M&L for 100mm thick Cement concrete type B-2, 1:2:4 (40mm graded aggregate) as in floor finished even and smooth without using extra cement complete all as specified. |
| 36 | M&L providing cement concrete 1:2:4 type B-1 (Using 20mm graded stone agg) , 25mm thick as in sub base in floor/paving etc. |
| 37 | M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding of cm 1:6 layer in floor finishes all as specified and as directed |
| 38 | M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square) area of each tile exceeding 0.16 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding of cm 1:6 layer in floor finishes complete all as specified and as directed |
| 39 | S & F 2nd class hardwood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed in position complete, as specified and directed. |
| 40 | M&L hold fasts size 25 x 3 mm; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 |
| 41 | S&F 35 mm thick 2nd class hardwood, Plain, framed, panelled Factory made shutters (two panels), with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I) klin seasoned and chemically pressure treated. |
| 42 | S&F 35 mm thick 2nd class hard wood glazed and skeleton shutter of factory made divided into square, with plain chamfered or rounded mitred and rebated sash bar any number with edges of sash bar & framing moulded all as specified as per IS fitted to chowkats complete all as directed |
| 43 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete. |
| 44 | S&F butt 100mm size, hinges medium weight, cold rolled mild steel, etc complete all as specified and as directed and directed. |
| 45 | S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy. |
| 46 | S& F aluminium anodised tower bolt of extruded section, 150mm long, etc complete all as specified and as directed and directed. |
| 47 | S&F aluminium handle extruded aluminium alloy fabricated type, 150mm size etc complete all as specified and as directed and directed. |
| 48 | S&F floor door stopper of aluminium alloy body and tounge, anodised with hard drawn spring fixed in floor, overall length of cover plate 150 mm all as specified and directed. |
| 49 | Taking down steel tubing and connections, including cleaning for refixing or removal to store of 15 mm bore complete all as specified and directed. |
| 50 | S&F mild steel galvanised tubes 15mm medium grade with all fitting, fixed to wall, ceiling or laying in floor.etc complete all as specified and as directed and directed. |
| 51 | S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20mm bore |
| 52 | PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement. |
| 53 | S&F 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, jointed with solvent laid in trenches or in floors complete all as specified and directed. |
| 54 | S&F for 110mm bore PVC (SWR) bends any radius complete all as specified and directed |
| 55 | M&L for Joist, channel, angle, or tee sections, Fe-290 (Gde-E-165), fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete. |
| 56 | M&L for rolled mild steel in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-290 (Gde-E-165) complete all as specified. |
| 57 | M&L preparation of new steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specifed and directed. |
| 58 | M&L for preparation of old painted steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint (ordinary tint) complete allas specified and as directed. |
| 59 | S&F 6mm thick plain, multicavity poly carbonate sheet (transparent ) in roof covering, fixed with and including aluminium fillets at joints and aluminium angles at the end, fixed with self drilled screws and standard fittings, fixtures and accessories complete all as specified and directed. |
| 60 | M&L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 61 | S&F false ceiling of Non asbestos fibre cement building boards, manufactured from homogeneous mixture of cement, quartz and cellulose and cured with high pressure steam using auto claving process confirming to IS-14862, of size 600 mm x 600 mm x 4 mm thick fixed over and including anodised aluminium powder coated (minimum thickness of powder coating 50 micron) snap grid frame work of T section (main & cross member) of size 25 mm x 25 mm x IS mm thick in square pattern of grid size 600mm X 600mm . The aluminium frame work will supported on side wall with the used of aluminium 'L' section of size 25 mm x 25 mm x 1.5 angles etc. Snap grid shall be supported with hangers of 4 mm dia. Galvanised iron wire adjusting level fixed to roof slabs / truss etc by means of ceiling cleats made out of Galvanised iron flat of size 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified and as directed. |
| 62 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft soil |
| 63 | Removing excavated material (Soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in soils |
| 64 | M&L for finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) after complete removal of existing treatment and providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth on wall all as specified and directed. |
| 65 | S&F Two track sliding frame (60mm x 62mm) for Providing and fixing factory made uPVC white colour casement/sliding window/door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware, EPDM gasket, 1.2+ 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, all complete and as directed, (Glazing, hardware hinges and fitting, EPDM rubber gasket etc. to be paid separately.) Note:-Each member of window to be measured separately wrth clear length. |
| 66 | S&F Providing and fixing factory made uPVC white colour fixed window made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glass (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories Net opening will be measured for payment purpose.)(A) Area not exceeding 1.00 sqm each |
| 67 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.. complete all as specified and directed. |
| 68 | Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed. |
| 69 | M & L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic PVC rigid conduit (medium grade) with all fittings and accessories ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, sheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl fixing of modular metal flush boxes of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc. complete all as specified & as directed. (a) One light point or one fan point controlled by one switch |
| 70 | All as per Item No-69 but One 3 pin socket outlet, 5 amps, independent Please Enable Macros to View BoQ information |
| 71 | All as per Item No-69 but One 3 pin socket outlet, 5 amps, independent Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender