Tender For Construction of Type-Iv 01 No. Quarter At Hawai
Tender Value
Ref. Documents
Estimated cost
Bid Submission
11 Sep 2026
4 days left
EMD
75950
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Papum Pare → Arunachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction of Type-Iv 01 No. Quarter At Hawai
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in Hill Area in Soil by Mechanical Means (Excavation in soil in hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 metres) |
| 2 | Excavation in Hilly Area in Ordinary Rock by Mechanical Means not Requiring Blasting. (Excavation in hilly area in ordinary rock not requiring ballasting by mechanical means including cutting and trimming of slopes and disposal of cut material with all lift and lead upto 1000 metres ) |
| 3 | Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m. |
| 4 | Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete. |
| 5 | Providing and laying in foundations and plinth cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering. |
| 6 | Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centring an shuttering in:b) Walls including attached buttresses, pilasters and their caps and bases and string courses etc. up to floor two level.(Wall) |
| 7 | Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 8 | Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement. a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 9 | Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 10 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 11 | Providing reinforced cement concrete eaves board 25 mm thick and 15 cm to 30 cm wide inM 20 mix (1 cement : 1.5 coarse sand : 3 stone aggregate 10 mm nominal size) up to floor two level including finishing and plastering with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm on exposed surfaces to give smooth and even surface, centring and shuttering but excluding cost of reinforcement. |
| 12 | Reinforced cement concrete in walls (any thickness) including attached pillasters, buttresses, plinth and string course, fillets etc from top of foundation up to floor two level including finishing and plastering the exposed surfaces with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface excluding cost of centring, shuttering and reinforcement in :a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 13 | Brick work with best available local bricks in plinth and in Superstructure in cement mortar 1:4 (1 cement : 4 fine sand). |
| 14 | Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level. |
| 15 | Reinforcement of RCC work including bending, binding and placing in position complete. |
| 16 | Steel work in single section including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. b) In Tees, Angles and Channels |
| 17 | Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws. a) Plain grill. |
| 18 | Door / Window / Ventilator Frames:-Providing and Fixing factorymade WPC/PVC door frame made of PVC extruded sections of size100mmx74mm ,having wall thickness 2.0mm (±0.2mm).Both verticals sides of the frame reinforced with PVC profile of cross section size 28 mm x 30 mm x 2 mm thickness (±0.2mm) and 75mm x 200mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut, jointed and fusion welded together,including providing and fixing 3nos of 125mmlong stainless steel hinges to frame, fixing the frame with jamb with required nos & sizes of anchor dash fastener,all complete as per manufacturer's specification and direction of engineer- in-charge. |
| 19 | Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including aluminium butt hinges with necessary screws. |
| 20 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips |
| 21 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-incharge . (Cost of aluminium snap beading shall be paid in basic item):. |
| 22 | Providing and laying in foundations and plinth cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering. |
| 23 | Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement.a) 40 mm thick |
| 24 | White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry.(Main Building Flooring) |
| 25 | White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry.( for WC & Bath floors&dado) |
| 26 | Chequered terrazzo tiles 22 mm thick with marble chips of sizes upto 6mm in floors on 25 mm thick bed mortar 1 : 3 (1 cement : 3 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete: b) Medium shade using approximately 50% white cement and 50% ordinary cement. |
| 27 | Providing and laying damp proof course 50 mm thick with cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size). |
| 28 | Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete. |
| 29 | Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete. |
| 30 | Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finsihing the top smooth. |
| 31 | Centring and shuttering including strutting, propping etc and removal of form work for : a) Foundation, footings, bases of columns etc. and mass concrete. |
| 32 | b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 33 | c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height). |
| 34 | d) Lintels, beams, girders, bressumers and cantilevers etc. |
| 35 | e) Column, pillars, posts and struts etc. |
| 36 | 12 mm cement plaster 1 : 4 (1 cement : 4 fine sand). |
| 37 | Neat cement punning. |
| 38 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 39 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete |
| 40 | Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade. |
| 41 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete. |
| 42 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade. |
| 43 | Construction of Septic Tank 3.8 mx2.8m x1.8m as per complete standard drawing & design. |
| 44 | Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design. |
| 45 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standardmake and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid |
| 46 | Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and clamps 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required. |
| 47 | Providing and fixing a pair of white vitreous china foot rest of standard pattern for squatting pan WC.(250mmX130mmx30mm) |
| 48 | Providing and fixing sand PVC/cast iron/ cast iron (spun) soil, waste and vent pipes.Size 100mm Dia |
| 49 | Providing and fixing best quality PVC Elbow/Plain bend 100 mm dia (Inner) |
| 50 | Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design. a) 100 mm dia SW pipes |
| 51 | Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.a) 100 mm dia SW pipes |
| 52 | Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required. |
| 53 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.17.28.2 Flexible pipe(17.28.1.1) 32 mm dia |
| 54 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : a) Kitchen sink with drain board i) 510x1040 mm bowl depth 250 mm |
| 55 | Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement : 5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg). |
| 56 | Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleadt with CP brass screws and washers. |
| 57 | Providing and fixing on wall face PVC/C.I. rain water pipe including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement : 2 fine sand).a) 100 mm diameter pipe |
| 58 | Providing and fixing 600 x 120 mm glass shelf with CP brass brackets and guard rail complete, fixed to wooden cleadts with CP brass screws |
| 59 | Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden cleadt with CP brass screws (heavy quality). |
| 60 | Providing and fixing toilet paper holder. |
| 61 | Providing and fixing hand spray (flexible) approved quality.15 mm nominal bore |
| 62 | Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls a) 15 mm nominal bore (Internal) |
| 63 | b)20 mm nominal bore (External) |
| 64 | c) 32 mm nominal bore |
| 65 | Providing and fixing brass stop cock of approved quality. a) 15 mm nominal bore(Internal) |
| 66 | Providing and fixing brass bib cock of approved quality.15 mm nominal bore |
| 67 | Providing ,Fixing ,commissioning & testing of 2 H.P. 1 Phase pump(SWJ 1 ) including control Panel and all accesories or as directed by Engg. i/c |
| 68 | Providing and fixing in position Polyethylene water storage tank at terrace floor for water supply |
| 69 | Supplying of Single Bed |
| 70 | Supplying of Double Bed |
| 71 | Supplying of Bedside Table |
| 72 | Supplying of Mattress |
| 73 | Supplying of Study/Writing Table |
| 74 | Supplying of Study chair |
| 75 | Supplying of Visitors chairs (Supreme ornate) |
| 76 | Supplying of Sofa (3 seater) |
| 77 | Supplying of sofa single seater |
| 78 | Supplying of Side table |
| 79 | Supplying of Centre Table |
| 80 | Supplying of Steel Almirah |
| 81 | Supplying of Wooden wardrobe |
| 82 | Supplying of Book Rack |
| 83 | Supplying of Dressing Table |
| 84 | Supplying of Shoe Rack |
| 85 | Supplying of Kitchen Storage Rack |
| 86 | Supplying of Dinning Table (6 seater) |
| 87 | Supplying of Dinning chair |
| 88 | CARTAGE/HAULAGE: cement |
| 89 | MS rod |
| 90 | Bricks |
| 91 | MS sections |
| 92 | Broken Aggregate |
| 93 | BOUNDARY FENCING: Providing & fixing 1.8m high security fencing with 2.13m angle iron post(size 40x40x5mm) ,0.45m length bent at an angle of 45 degree at top,placed at 2.5m apart,embeded in cement concrete blocks of 30x30x80cm(0.50m below G.L ) of mix 1:3:6 (1cement:3sand:6stone aggregate 20mm nominal size) corner and every 12th post or corner post to be struted and embeded in cc block of samemix, G.I chain linked(10SWG) fencing of 1.18m ht. above brickwork or cc, rows of G.I barbed wire fitted and fixed at bent up portions between the post with GI stapples including excavation,concrete works,cost of posts, struts, fixing, etc all complete as per the direction of Engineer-in-charge. |
| 94 | C/O Steel Gate 4.5 mtr with MS angle frame 45 X 45 X 5mm embedded on RCC post 35 X 35 Cm complete as per drawing and direction of engineer incharge . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender