Tender For Construction Of Sub-Registrar Office (Type-Ii) For Tahasil Office At Kashinagar In The District Of Gajapati Buildings.
Tender Value
2.10 Crore
Estimated cost
Bid Submission
18 Sep 2026
5 days left
EMD
2.11 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gajapati → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Sub-Registrar Office (Type-Ii) For Tahasil Office At Kashinagar In The District Of Gajapati Buildings.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed and depositing the excavated materials away from the work site within initial lead & lifts etc. complete as directed by the Engineer in charge. |
| 2 | Supplying and filling in foundation and plinth with sand, laying in layers, well watered and rammed including cost, conveyance, royalties and taxes of all materials, cost of all labour and T&P etc. complete in all respect as per direction by the Engineer in charge. |
| 3 | Providing GSB Gr-vi materials, spreading in uniform layers with motor grader, mixing by mix in place method at OMC and compacting with vibratory roller to achieve the desired density including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Clause - 401 of MoRT&H Specifications for Road & Bridge works (5th Revision). |
| 4 | Providing and laying PCC (1:3:6) in foundation and floors using 4cm size crushed stone granite aggregates including laying in layers, ramming, watering and curing etc. complete including cost, conveyance, royalties, taxes of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in -charge. |
| 5 | PCC / RCC work of (1:1.5:3) in all floors using 12mm size crushed stone granite aggregates including laying in layers, ramming, watering and curing etc. complete including cost, conveyance, royalties, taxes of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in -charge. |
| 6 | Fly ash brick masonry in all floors with cement mortar (1:6) using bricks of 25cm size, after immersing Bricks before use with watering, curing etc. complete including cost, conveyance, royalties, taxes of all materials, cost of all labour, all T&P etc. complete in all respect as directed by the Engineer-in-charge.In Foundation |
| 7 | Back Filling of surplus excavated earth at work site by initial lead and lift of 1.50mtr including cost of all labour T&P required for the work etc. complete as directed by Engineer-In-Charge |
| 8 | R.C.C. work of M.25 in Foundation using 20 mm & down graded size crushed stone granite aggregates including hoisting lowering, laying concrete and compacting by using vibrators, watering, curing and necessary centring & shuttering for smoth finishing of work excluding steel reinforcement work including cost, conveyance, royalties, taxes of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in -charge.In Foundation |
| 9 | Plinth Band |
| 10 | Column & BeamGround Floor |
| 11 | First Floor |
| 12 | Head Room |
| 13 | LintleGround Floor |
| 14 | First Floor |
| 15 | Head Room |
| 16 | Roof SlabGround Floor |
| 17 | First Floor |
| 18 | Head Room |
| 19 | Stair CaseGround Floor |
| 20 | First Floor |
| 21 | ChajjaGround Floor |
| 22 | First Floor |
| 23 | Head Room |
| 24 | ShelvesGround Floor |
| 25 | First Floor |
| 26 | FinsGround Floor |
| 27 | First Floor |
| 28 | Straightening cutting, bending & binding of bent up or coiled rods confirming to I.S. 432 for Plain and 1785 for Tor steel and binding, tying the grills, hoisting, lowering and placing in proper position including cost, conveyance and taxes of all materials and cost of all labour with all T&P required for the work etc. complete as directed by the Engineer- in-Charge.Ground Floor |
| 29 | First Floor |
| 30 | Head Room |
| 31 | Fly ash brick masonry in all floors with cement mortar (1:6) using bricks of 25cm size, after immersing Bricks before use with watering, curing etc. complete including cost, conveyance, royalties, taxes of all materials, cost of all labour, all T&P etc. complete in all respect as directed by the Engineer-in-charge.In Super Structure Ground floor |
| 32 | First Floor |
| 33 | Head Room |
| 34 | Fly ash brick masonry in all floors with cement mortar (1:4) using bricks of 25cm size, after immersing Bricks before use with watering, curing etc. complete including cost, conveyance, royalties, taxes of all materials, cost of all labour, all T&P etc. complete in all respect as directed by the Engineer-in-charge.. Ground Floor |
| 35 | First Floor |
| 36 | Providing 16 mm thick C.P. with C.M. (1:6) on inside surface of wall with screened and washed sharp sand for mortar and finished smooth including watering and curing with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.Ground Floor |
| 37 | First Floor |
| 38 | Head Room |
| 39 | Providing 12 mm thick C.P. with C.M. (1:6) on outside surface of wall with screened and washed sharp sand for mortar and finished smooth including watering and curing with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.Ground Floor |
| 40 | First Floor |
| 41 | Head Room |
| 42 | Providing 6 mm thick C.P. with C.M. (1:4) on inside surface of exposed RCC with sand for mortar and finished smooth to RCC work after closed deep chipping & slurry treatment including watering and curing etc complete with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.Ground Floor |
| 43 | First Floor |
| 44 | Head Room |
| 45 | Providing 6 mm thick C.P. with C.M. (1:4) on outside surface of exposed RCC with sand for mortar and finished smooth to RCC work after closed deep chipping & slurry treatment including watering and curing etc complete with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.Ground Floor |
| 46 | First Floor |
| 47 | Head Room |
| 48 | Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size crushed stone granite aggregates including laying, watering and curing etc. complete including cost, conveyance, royalties, taxes of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in -charge.Ground Floor |
| 49 | First Floor |
| 50 | Head Room |
| 51 | Supplying, fitting, fixing of Vitrified tiles (60cm x 60cm: colour) in floors over 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. Ground Floor |
| 52 | First Floor |
| 53 | Supplying, fitting, fixing of Vitrified industrial tiles (30cm x 30cm) in floors over 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. Ground Floor |
| 54 | First Floor |
| 55 | Head Room |
| 56 | Supplying, fitting, fixing of Vitrified tiles (60cm x 60cm: colour) in dadoo in all floors over 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. Ground Floor |
| 57 | First Floor |
| 58 | Supplying, fitting, fixing of Vitrified industrial tiles (30cm x 30cm) in dadoo in all floors over 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. Ground Floor |
| 59 | First Floor |
| 60 | Head Room |
| 61 | Supplying, fitting, fixing of Chequred tiles in floors over 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. |
| 62 | Providing & laying of 80 cm thick cement concrete interlocking paver block of M-30 grade of approved make, veriety, colour & size made by block making machine with strong vibratory compaction of approved design and shape laid in required colour paitern over a prepared bed, filling the joints with sand etc all complete including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. |
| 63 | Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures.Ground Floor |
| 64 | First Floor |
| 65 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures.Ground Floor |
| 66 | First Floor |
| 67 | Head Room |
| 68 | Supplying and fitting,fixing of Un-plasticised poly vinyl Choloride (UPVC) (FENESTA / NCL VEKA LTD)Ventilator / Top Hung -60 series duly manufacured using UPVC reinforced profile of 60 mm x 55 mm x 2.5 mm for outer frames 75 mmx 60 mm x 2.25 mm for casement window sash profile capable of mounting single glazing system , structurally reinforced with hot dip galavanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the widow sash shall be fitted fitted with 6 mm thick clear toughned glass of SAINT-GOBAIN Makke duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No. per set of sashes and the system is to be installed at the site using anchor fasteners,silicon rubber sealant ,easy glazing / deglazing at site etc. including cost and conveyance of all materials,accessories,labour charges,materials and product conforming to ASTM D 638-14 ,EN-477-95 and other applicable codes and standards.Ground Floor |
| 69 | First Floor |
| 70 | Dressed seasoned sal wood work framed & fixed in frames of doors & windows including cost,conveyance of all materials and cost of labour for fitting, fixing etc.complete as per the instruction of Engineer-in-Charge . |
| 71 | Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete |
| 72 | Supplying of M.S. Grills etc including cost,conveyance of all materials etc.complete as per the instruction of Engineer-in-Charge .Ground Floor |
| 73 | First Floor |
| 74 | Head Room |
| 75 | Supplying of M.S. Door, MS Gate etc including cost,conveyance of all materials etc.complete as per the instruction of Engineer-in-Charge .Head Room |
| 76 | Supplying, fitting and fixing hand railing of Stainless steel of 304 grade using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, cost of all labour, T&P etc. required for the complete in all respect as per direction of the Engineer-in-charge. Ground Floor |
| 77 | First Floor |
| 78 | Providing, Fitting & Fixing of False Ceiling with 12 mm thick gypsum board, Aluminum anodized T section No -3215 with 2ft center to center L section No-1705 up to 15micron on four walls to be fixed by means of steel screw and PVC plug and Aluminum grid 2'-0\\"x2'-0\\" suspended from ceiling including cost, conveyance, royalties and taxes of all materials with cost of all labour, and T&P required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 79 | Finishing plastered surfaces with cement washing one coat using cement on inside plaster / concrete surface including cost, conveyance, taxes of all materials, cost of all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. Ground Floor |
| 80 | First Floor |
| 81 | Head Room |
| 82 | Finishing plastered surfaces with cement washing one coat using cement on outside plaster / concrete surface including cost, conveyance, taxes of all materials, cost of all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. Ground Floor |
| 83 | First Floor |
| 84 | Head Room |
| 85 | Finishing plastered surfaces with cement putty (water based) of approved make on inside plaster / concrete surface and finishing the surface smooth and even by sand papering to receive paint in walls, at all heights with staging wherever necessary with cost, conveyance, taxes of all materials, cost of all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. Ground Floor |
| 86 | First Floor |
| 87 | Head Room |
| 88 | Finishing plastered surfaces with cement putty (water based) of approved make on outside plaster / concrete surface and finishing the surface smooth and even by sand papering to receive paint in walls, at all heights with staging wherever necessary with cost, conveyance, taxes of all materials, cost of all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. Ground Floor |
| 89 | First Floor |
| 90 | Head Room |
| 91 | Finishing outside plastered surfaces with water proofing cement paint of approved shade on new work of two coats over a coat of primer in all floors, all heights with staging wherever necessary with cost, conveyance, taxes of all materials, cost of all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. Ground Floor |
| 92 | Painting two coats with approved weather seal paints of approved colour, shade on wall surface over a coat of wall primer including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.Ground Floor |
| 93 | First Floor |
| 94 | Head Room |
| 95 | Painting two coats with plastic emulsion paint over a coat of water bond cement primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. Ground Floor |
| 96 | First Floor |
| 97 | Head Room |
| 98 | Painting two coats with approved Synthetic enamel paints of approved colour, shade over a coat of primer over new wood work including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.Ground Floor |
| 99 | First Floor |
| 100 | Head Room |
| 101 | Providing fitting and fixing up partition walling OEL aluminium anodised section No-9210 and 9207 as single groove and double groove respectively as horizontal and vertical member and OEL section 4660 as tapered clip for fixing up 12 mm thick BWR ply with 2 mm thick mica and jointing angle No-1855 etc Data for 6'-10\\" x 7'-6\\" = 51.22sft or 4.76 sqm=24.39 Kg etc, complete as per specification & direction of Engineer-in-charge. |
| 102 | Supplying and fitting of Roller blinds by fixing Powder coated top chanel,bottom chanel with bottom end cap,control unit and good quality of .60 mm thick fabric of approved design and quality etc. complete. SOR 2022. etc, complete as per specification & direction of Engineer-in-charge. |
| 103 | EI WorksRecessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC flexible conduit with 6Amp ,250V Modular switch (make-Anchor/ Legrand /Roma/Equivalent)ISI marked and ceiling rose ISI marked mounted on Metal box having front Modular cover of suitable size, Metal box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/KEI/RHINO/C&S) Group-A -L.P- 30 F.P- C.B.P- |
| 104 | Group-B L.P- 30 F.P-8 C.B.P- |
| 105 | Group-C L.P- 50 F.P- 36 C.B.P-6 |
| 106 | Wiring for twin control light point / Group Control with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess PVC conduit with 2 way Modular type switch, Modular plate, suitable GI Box and earthing point with 1.5 sq.mm FR PVC insulated single core multistrand |
| 107 | Supply and fixing of 6Amp plug with 6Amp switch on existing board (Modular type )(make-Anchor/ Legrand /Roma/Equivalent) |
| 108 | Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing 1 nos of 3 pin 5/6 A modular socket outlet and 1 nos of 5/6 A modular switch connection (make-Anchor/ Legrand /Roma/Equivalent) |
| 109 | Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing 1 nos of 6pin 15/16Amp socket outlet and 1 nos of 15/16Amp Modular switches connection (make-Anchor/ Legrand /Roma/Equivalent) |
| 110 | S/F of Multipurpose board Supply and fixing of 2 no.sof 3pin 5/6 amp modular socket and 2 nos of S.P. 5/6 amp one way modular switch on Modular G.I. Box with Modular Base and cover. (make-Anchor/ Legrand /Roma/Equivalent) |
| 111 | Supply and fixing of 4 no.s of 3pin 5/6 amp modular socket and 3 nos of S.P. 5/6 amp one way modular switch, on Modular G.I. Box with Modular Base and cover. (make-Anchor/ Legrand /Roma/Equivalent) |
| 112 | Supply and drawing of following size PVC insulated single core multistrand copper conductor in existing surface/recessed/STEEL / conduit as required. 1 X 1.5sqmm |
| 113 | Recessed submain wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6 mm in surface /recessed PVC conduit as required (make of wire -Finolex/L&T/Anchor/Havells/V-Guard/KEI/RHINO) 2 X 1.5sq.mm +1 X 1.5sqmm |
| 114 | 2 X 2.5sq.mm +1 X 1.5sqmm |
| 115 | 2 X 4sq.mm +1 X 1.5sqmm. |
| 116 | 2 X 6sq.mm +1 X 2.5sqmm. |
| 117 | 4X 10sq.mm + 2 X 4sqmm. |
| 118 | Supply and fixing of superior type call bell of ISI marked, on 6\\" X 4\\"conforming to IS-2268/1994 and bell push of ISI marked , conforming to IS-1293/ 1988 (make-Cona/ Anchor/equivalent) Musical Call bell with battery |
| 119 | (Ding Dong) call bell/Buzzer . |
| 120 | S/F of 9Watt LED bulb fitting (Make-Havells/Philips/C&S/Magik/Crompton/Halonix) |
| 121 | S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose . |
| 122 | S/F of 20W 4' LED fitting Surface LED Light fitting (Make-Havells/Philips/C&S/Magik/Crompton/Halonix) |
| 123 | S/F of 12Watt Circular Surface down light LED fitting (Make-Havells/Philips/C&S/Magik/Crompton/Halonix) |
| 124 | S/F of 18Watt White Circular/Square Surface LED fitting (Make-Havells/Philips/C&S/Magik/Crompton/Halonix) |
| 125 | S/F of 18W 1'X1' Surface/recessed on Ceiling LED fitting(Make-Havells/Philips/C&S/Magik/Crompton/Halonix) |
| 126 | S/F of 36W 2'X2' LED Surface/ recessed on Ceiling LED fitting (Make-Havells/Philips/C&S/Magik/Crompton/Halonix) |
| 127 | S/F of 90W LED street light fitting (Make-Havells/Philips/C&S/Magik/Crompton/Halonix) |
| 128 | S/F of G.I. Street light Bracket with M.S. Clamp |
| 129 | S/Fof B.H fitting CFL type complete (Bajaj/Philips with lamp |
| 130 | S/F of 1200mm High speed Ceiling fan, Heavy Duty,durable, copper winding,Aluminium blade(ISI mark)Crompton Grave/Khaitan/Orient/Polycab/Bajaj/V-Guard |
| 131 | Exhaust fan 225mm (9\\") size With Making hole requir size.(Make-Havels/Ushs/Almonard/Orient/Cromoton/ or Equivalent) |
| 132 | Wall mounted fan 600 mm |
| 133 | Supply and fixing of Modular fan regulator(Cona/ Anchor/ Usha/Bajaj)Electronics step type Regulator (Modular type) |
| 134 | Supply and fixing of extra down rod20mm dia for 10cm x 6 |
| 135 | Supply and fixing of following way single pole and neutral sheet steel TPN MCB distribution board 415 V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-HPL/ Havells/ Legrand /L&T/C&S.) 4 WAY(4+12),TPN MCB DB Double Door horizontal type |
| 136 | Supply and fixing of 5Amp to 32A rating 240V \\"B\\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required.(make-HPL/ Havells/ Legrand /L&T/C&S) 6 to 32 Amp rating Single pole (SP) MCB |
| 137 | 0.5 to 5 amp rating Single pole (SP) MCB |
| 138 | Supply and fixing of following rating Double Pole 240V \\"C\\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required.(make-HPL/ Havells/ Legrand /L&T/C&S) 40 Amp DP MCB ISOLATOR |
| 139 | 63Amp DP MCB ISOLATOR |
| 140 | Supply and fixing of following rating 4 Pole 415 V \\"C\\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required.(make-HPL/ Havells/ Legrand /L&T/C&S) 40 Amp TRIPLE POLE AND NEUTRAL MCB |
| 141 | 63 Amp TRIPLE POLE AND NEUTRAL MCB |
| 142 | S/F of 20 to 32 amp 240 V , DP AC Starter on surface or in recess with complete connections, testing and commissionig etc. as required. |
| 143 | Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-HPL/ Havells/ Legrand /L&T/C&S.) 8 WAY, DOUBLE DOOR |
| 144 | Supplying and fixing of following MODULAR type switch / socket on the existing switch box / cover including connections etc as required 6 Pin 15/16 Amp Modular socket outlet |
| 145 | 6 Pin 15/16 Amp Modular TOP |
| 146 | Blank plate |
| 147 | Supplying and fixing of following MODULAR type Bell push on the existing switch box / cover including connections etc as required. |
| 148 | 16 SWG pannel box 42 X 36X 10=4428sq. inch for single door made out of CR sheet of 16SWG and boarder angle frame to provide above pannel with proper space ,hinges, and other accessories , hinged door must be painted one coated red oxide and two coat enamel gray paint (Duly Powder Coated) |
| 149 | Supply and fixing of internal wiring to equipment installed in the pannel board with required size of copper multistrand single core cables duly crimped with copper lugs and all connections 36\\" X 48\\"=1728Sqinche including cost of copper conductor and other fittings |
| 150 | Supply and fixing of Indicator lamp with toggler switch and fuse |
| 151 | Supply and fixing of C.T coil upto 400Amp including all connections |
| 152 | Supply and fixing of Digital Ammeter with selector switch including all connections |
| 153 | Supply and fixing of Digital voltmeter with selector switch including all connections |
| 154 | S/F of copper bus bar 50 x 8mm with required size of insulating material and nut and bolts |
| 155 | installation , testing , commissioning & Charging of pannel board |
| 156 | Supply and fixing of 4pole MCCB in cubicle pannel board S/F of 100AMP 25KA MCCB of Hager/Legrand/C&S Make with MS box including both side connections with all complete |
| 157 | Supply and fixing of following rating Double Pole 240V \\"C\\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required.(make-HPL/ Havells/ Legrand /L&T/C&S) 40 Amp DP MCB ISOLATOR |
| 158 | 63Amp DP MCB ISOLATOR |
| 159 | Supply and fixing of following rating 4 Pole 415 V \\"C\\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required.(make-HPL/ Havells/ Legrand /L&T/C&S) 40 Amp TRIPLE POLE AND NEUTRAL MCB |
| 160 | 63 Amp TRIPLE POLE AND NEUTRAL MCB |
| 161 | S/F of 250AMP 50KA MCCB of Hager/Legrand/C&S Make with MS box including both side connections with all complete. |
| 162 | Supply and fixing of changeover switch (Anchor/ Havells/ Apex)250amp four pole (3pole neutral) |
| 163 | 16 SWG pannel box 30 X 330X 10=4428sq. inch for single door made out of CR sheet of 16SWG and boarder angle frame to provide above pannel with proper space ,hinges, and other accessories , hinged door must be painted one coated red oxide and two coat enamel gray paint (Duly Powder Coated) |
| 164 | Supply and fixing of internal wiring to equipment installed in the pannel board with required size of copper multistrand single core cables duly crimped with copper lugs and all connections 36\\" X 48\\"=1728Sqinche including cost of copper conductor and other fittings |
| 165 | Supply and fixing of Indicator lamp with toggler switch and fuse |
| 166 | Supply and fixing of Digital voltmeter with selector switch including all connections |
| 167 | S/F of copper bus bar 35 x 5mm with required size of insulating material and nut and bolts |
| 168 | Base channel 50 X 50 X 8mm |
| 169 | S/F of Floor Rubber mat 6;X4'X6 mm |
| 170 | installation , testing , commissioning & Charging of pannel board |
| 171 | S/F of 100AMP 25KA MCCB of Hager/Legrand/C&S Make with MS box including both side connections with all complete |
| 172 | Supply and fixing of following rating Double Pole 240V \\"C\\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required.(make-HPL/ Havells/ Legrand /L&T/C&S) 40 Amp DP MCB ISOLATOR |
| 173 | 63Amp DP MCB ISOLATOR |
| 174 | Supply and fixing of following rating 4 Pole 415 V \\"C\\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required.(make-HPL/ Havells/ Legrand /L&T/C&S) 40 Amp TRIPLE POLE AND NEUTRAL MCB |
| 175 | 63 Amp TRIPLE POLE AND NEUTRAL MCB |
| 176 | Supply of PVC/XLPE Aluminium armored cables ISI marked.(Make- Glowstar/ Polycab/Nicco/KEI/RHINO as per letter No-309 19.1.2011 of SEEC (R&B) Odisha) 25sq.mm 3 1/2 core |
| 177 | 70sqmm 3 1/2 core |
| 178 | Cable laying on wall surface with steel shaddle upto 25sqmm |
| 179 | Cable laying on wall surface with steel shaddle 25sqmm to 120sqmm |
| 180 | Supply of Invertor,UPS 2300VA Pure shine wave (Make Microtech/Su-kam/Luminous) |
| 181 | Supply of Invertor Battery 12V 150AH(Make Exide/Amrom/Su-kam/Luminous with 48 Month warranty) |
| 182 | Supply of Invertor Stand for Double Battery stand(Make Microtech/Su-kam/Luminous) |
| 183 | Supply and fixing Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing as required |
| 184 | Supply and fixing of copper plate earthing( 600 X 600 X 3.15mm )with running copper flat 25 X 5mm from copper plate to funnel of 40mm dia G.I pipe including all accessories |
| 185 | Supplying and laying 25 mm x 3 mm copper strip on surface or in recess for connection etc as required. |
| 186 | Fire extinguisher Portable Fire Extinguisher System Supplying, Installation,testing & commissioning of CO2 type Fire Extinguisher 4.5KG Capacity confirming to IS- 2878 made from ISI marked seamless cylinderconfirming to IS- 7285 made from ISI marked controlled valveconfirming to IS- 3224 high pressure 1mtr discharge hose & iron complete with initial gas charges with carrying handle & wall mounting bracket as per direction of EIC. |
| 187 | Fire extinguisher Portable Fire Extinguisher System Supplying, Installation,testing & commissioning ofABC type Fire Extinguisher 6 KG Capacity confirming to IS- 2878 made from ISI marked seamless cylinderconfirming to IS- 7285 made from ISI marked controlled valveconfirming to IS- 3224 high pressure 1mtr discharge hose & iron complete with initial gas charges with carrying handle & wall mounting bracket as per direction of EIC. |
| 188 | PH WorksSupplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipes conforming to pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge.(Pressure guage test for pipe )G Floor 20mm dia C-PVC pipe (Ashirbad/Supreme/Oripalst) |
| 189 | 25mm dia C-PVC pipe (Ashirbad/Supreme/Oripalst) |
| 190 | 32mm dia P.V.C.ASTM(Sch.-80)Pipes |
| 191 | First Floor20mm dia C-PVC pipe (Ashirbad/Supreme/Oripalst) |
| 192 | 25mm dia C-PVC pipe (Ashirbad/Supreme/Oripalst) |
| 193 | 32mm dia P.V.C.ASTM(Sch.-80)Pipes |
| 194 | 40mm dia P.V.C.ASTM(Sch.-80)Pipes |
| 195 | Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar ( 1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.G Floor |
| 196 | First Floor |
| 197 | Supplying all materials, labour, T&P and cutting of R.C.C roof or cornice for taking H.C.I pipes and making good the damages etc all complete as per P.H.Specification and direction of the Engineer in charge.Ground floor |
| 198 | First Floor |
| 199 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per the direction of the Engineer in chargeG Floor |
| 200 | First Floor |
| 201 | Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge250mm to 375mm thick wall G Floor |
| 202 | First Floor |
| 203 | Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge(below model or equivalent of any brand) 16 mm dia CP Short body Bib cock()CON-CHR-049NKN |
| 204 | 15mm dia CP angle stop cock (FLR-CHR-5053N make) |
| 205 | 15mm dia CP Pillar cock (FLR-chr-5011N make) |
| 206 | 15mm dia CP two in one bib cock (FLR-CHR-5041N make) |
| 207 | 15mm dia CP Health faucet (ALD-CHR-573 make) |
| 208 | 25mm dia brass or gun metal fullway valve(Shakti Make) |
| 209 | 32mm dia brass or gun metal fullway valve(Shakti Make) |
| 210 | 15mm dia CP flange |
| 211 | 15mm dia CP extension piece |
| 212 | Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class Fly ash brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge 2000 litre capacity water storage Sintex tank on the roof of 2nd floor. |
| 213 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturers specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge110mm dia U-PVC SWR pipes(Supreme/Ashirvad) |
| 214 | 75mm dia U-PVC SWR pipes(Supreme/Ashirvad) |
| 215 | 100mm dia U-PVC P trap |
| 216 | 110mm dia U-PVC Door Tee |
| 217 | 100mm dia U-PVC Plain Bend |
| 218 | 100mm dia U-PVC Door Bend |
| 219 | 100mm U-PVC Door Cross Tee |
| 220 | 75mm dia U-PVC Door Bend. |
| 221 | 75mm dia U-PVC Plain Bend. |
| 222 | 110x75mm dia Reducer |
| 223 | 110mm dia Vent cowl. |
| 224 | W/C connector |
| 225 | PVC Clamp suitable for 75mm to 110mm dia pipe |
| 226 | 125mm dia CP grating |
| 227 | Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge. 10 litres capacity pvc low level cistern with 32mm dia CP long flush bend Slimline white (Parryware/Hinware) |
| 228 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral P or S trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge |
| 229 | Supplying all materials , labour, T&P and fixing Vitreous china water closet ,squatting pan ( Indian type W.C. pan / Orissa pattern squatting pan ) duly embedded in cement concrete 1:5:10 using hard granite metal 4cm nominal size including fixing a pair of vitreous china 250mmx130mmx30mm foot rest, fixing 100mm dia hci 'P' or 'S' trap for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge. 580mmx440mm size Orissa pan (Parryware/Hinware) |
| 230 | Supplying all materials, labour, T&P and fixing bowl pattern urinal conforming to IS:771-part-3-1985 of the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge. Half stall urinal (Jaquar/Parryware / Hindware make). URS-WHT-13253N Urinal (Back Inlet) |
| 231 | 15mm dia urinal spreader |
| 232 | 32mm dia C.P. dome waste |
| 233 | Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered Hot and Cold with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge. 550mmx440 mm size wash hand basin With porcelain pedestal (Parryware/Hindware) |
| 234 | COUNTER TOP BASIN, SIZE: 610X415X160 mm(DRS-WHT-37601) |
| 235 | Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in chargeDesign mirror(Parryware) |
| 236 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargeGlass shelf 600mm long(ACN-CHR-1171N or equivalent of any brand) |
| 237 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge25mm x 600mm long CP towel rail ACN-CHR-1111SM equivalent of any brand |
| 238 | Towel Ring Round - (As Per Cat no.:ACN-CHR-1121BN equivalent of any brand |
| 239 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge CP soap holder AKP-ABR-35731P or equivalent of any brand |
| 240 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.for Counter Top Basin In Ground floor |
| 241 | In First floor |
| 242 | Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.In GF, |
| 243 | In FF,C. |
| 244 | Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.In GF, 1.00 qntl/ cum |
| 245 | In FF, |
| 246 | Supplying all materials, labour, T&P and fixing Granite tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge In ground floor |
| 247 | First Floor |
| 248 | Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etcall complete as per direction of the Engineer in charge.Ground Floor;- |
| 249 | Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 250 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge G Floor |
| 251 | First Floor |
| 252 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. Ground floor |
| 253 | First Floor |
| 254 | Supplying, fitting & fixing of Ceramic wall tiles of premium grade of size 600x300mm having thickness 6.5mm to 6.7mm confirming to IS 13753 in dadoes, skirting and risers of steps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge |
| 255 | First Floor |
| 256 | Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. size 40 x 40 cm Kajaria / Johnson/Somany make to be pree approved .G Floor |
| 257 | First Floor |
| 258 | Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. |
| 259 | Supplying and fitting-fixing of UPVC Louvers fixed window/ventilator made of (small series)frame 47x50mm & mullion 47x68 mm both having wall thickness of 1.9± 0.2mm and single glazing bead of appropriate dimension(Area upto 0.75sqm) etc.all complete as per direction of the Engineer-in-charge. 6x0.60x0.60= |
| 260 | Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge |
| 261 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class-3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturers specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.110mm all round concrete |
| 262 | 160mm all round concrete |
| 263 | Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, KB brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge. Inside size 250mmx250mm |
| 264 | Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, Ground class fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:1.5:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 760mmx760mmx450mm |
| 265 | Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in chargeMan hole chamber Inside size 910mmx910mmx910mm |
| 266 | Cost of R.C.P.C.Cover. |
| 267 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class Fly ash brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in chargeBrick masonry soakway pit 1.40m dia x 2.10m deep |
| 268 | Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge. |
| 269 | Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general. |
| 270 | Excavation of foundation in laterite rock or any hard rock (other than granite or disintegrated rock) removed by chiselling including dressing and levelling the bed not exceeding 1.50 mtr. in depth and depositing the soil within initial lead of 50 mtr. and as per specification approved by the Department. |
| 271 | Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge. |
| 272 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 273 | Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 274 | Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 275 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 276 | R.C.C beams,columns,girder and bressmer etc. |
| 277 | Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 278 | Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 279 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 280 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 281 | Supplying all materials, labour, T&P and providing brick work with Fly ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 282 | Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge. 2x6 nos |
| 283 | Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge |
| 284 | Supplying all materials, labour,T&P and providing 25mm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips on new work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 285 | Supplying all materials, labour, T&P and providing shoring and shuttering foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per direction of the Engineer in charge. |
| 286 | Dewatering with 5 H.P diesel engine pump during excavation 1nosx 30 hours |
| 287 | Supplying all materials, labour, T&P and fitting and fixing S.W.Tee of size 150mx150mx150m as per P.H.D.specification and direction of the E.I.C. |
| 288 | Supplying all materials, labour, T&P and constructing vent base as per P.H.D specification etc all complete. |
| 289 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. |
| 290 | 110mm U-PVC cowl |
| 291 | Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below first level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only |
| 292 | Drilling of 150mm dia bore 45 mtr to 150mtr |
| 293 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from first level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. |
| 294 | Cost of 200mm dia PVC (sch-80) pipe |
| 295 | Lowering of 150 mm dia P.V.C casing pipes,45 mtr to120 mtrs |
| 296 | Cost of 150 mm dia PVC (sch-80) pipe |
| 297 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge |
| 298 | Supplying all materials, labour, T&P for withdrawing casing pipes from the unsuccessful bore well including all necessary equipment and labour as per direction of the Engineer in charge . |
| 299 | Supplying all materials, labour, T&P and constructing Bore well protection chamber of the inside size 650x650x1000hight with cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ash brickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:4) inside and outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. |
| 300 | Supply all materials, labour, T&P and providing,fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specifications with suitable control pannel, jointing with GI/PVC/HDPE pipes electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge. 1.50 H.P single phase 3 stage head range 20 to 35 metres, discharge 145 to 110 L.P.M with outlet dia of 25mm |
| 301 | DOL controll pannel |
| 302 | 2.5 Sqmm flat cable |
| 303 | 32mm dia Steel short piece |
| 304 | Steel roop with cover |
| 305 | Well cap |
| 306 | 50mm size CI bracket |
| 307 | 20mm dia rigid UPVC pipe |
| 308 | 32mm Dia brass non return valve(Shakti make) |
| 309 | 32mm dia HDPE pipe |
| 310 | Labour charges for lowering of submesible pumpset with pipes and cables etc. with testing and commissioning at site. |
| 311 | Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 120 PSS UV (Eureka Forbes)of size 750x570x1350mm height with water storage capacity 120 liters along with 3 nos of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge. |
| 312 | Earthwork in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to minimum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer in charge. |
| 313 | Earthwork in excavation of foundation in stonety earth mixed with gravel within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to minimum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer in charge. |
| 314 | Supplying all materials, labour, T&P and providing filling sand including watering, ramming and conveyance of all materials to site. |
| 315 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site. |
| 316 | Supplying all materials, labour,T&P and providing cement concrete (1:1.5:3) for RCC work using 12mm HG chips including hoisting,laying,curring and conveyance of all materials to site etc complete. |
| 317 | Supplying all materials, labour, T&P and providing brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:3) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 318 | Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage. |
| 319 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor. |
| 320 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:3) including watering,curring and conveyance of all materials to site. |
| 321 | Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site. (1no) |
| 322 | Supplying all materials, labour, T&P and futting and fixing 20mm dia MS/CI step iron including supply of necessary C.C(1:2:4) for fixing etc complete as per P.H.D. specification. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender