Tender For Construction Of cement concrete Road At Dhala Sahi In Laxmipur For The Year 2026-27
Tender Value
63.45 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
1 days left
EMD
63450
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anugul → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of cement concrete Road At Dhala Sahi In Laxmipur For The Year 2026-27
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 18-Sep-2026 | Corrigendum | Date | 24-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation in all kinds of soil and depositing the material with in initial lead and lift including rough dressing and levelling with all labour, T&P, taxes and cess etc. complete as directed by the Engineer-in-charge. |
| 2 | Providing and laying mannualy with sand in regular layers not exceeding 150mm thick including all labour, materials, T&P, royalty, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge |
| 3 | Providing CC (1:3:6) in foundation upto 1.5 below bed level with 40mm nominal size H.G. metal including laying in position and compacting by using vibrator including shuttering, with all labour, materials, T&P, royalty, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge |
| 4 | Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement,thickness as per design, over a prepared sub-base, with 43 grade cement of any other type as per Clause 1501.2.2 M-30 (Grade), coarse and fine aggregate not exceeding 25mm mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design,laid in approved fixed side formwork (steel channel, laying and fixing of 125micron thick polythene film,wedges,steel plates including levelling the form work as per drawing), spreading the concrete with shovel,rakes,compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contaction and expansion, construction joints, applying debonding strips, primer, sealant,dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved,curing of concrete slabs for 14-days, curing compound (where Spefied) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 |
| 5 | Construction of embankment with approaved materials obtained from borrow pits with a lift upto 1.5m transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification clause 301.5 |
| 6 | Supply and laying 1000 mm dia RCC NP3 pipes including jointing the joints with C.M(1:2) with all labour, materials, T&P, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge (1000mm dia NP3.Hume pipes) |
| 7 | Providing weep holes in Brick Masonry/ plain reinforced concrete abutments, wing walls /return wall with 100 mm dia AC pipes extending through the full width of the structure with slope of 1 V :20 H towards drawing face complete as per drawing & technical specifications |
| 8 | C.C.M 15 using 40 mm hg metal of approved quality from approved quarry etc complete. (In foundation) |
| 9 | Sub-structure |
| 10 | R.C.C work of M-25 grade with 20mm and down grade black hard granite (crusher broken) stone chips including hoisting and laying etc with all labour, materials, T&P, royalty, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge Abutment cap & Dirt wall |
| 11 | R.C.C work of M-30 grade with 20mm and down grade black hard granite (crusher broken) stone chips including hoisting and laying etc with all labour, materials, T&P, royalty, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge Wearing coat |
| 12 | Providing C.C(1:2:4) using 12mm size HBG chips including hoisting and laying etc. with all labour, materials, T&P, royalty, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge |
| 13 | Providing M.S reinforcement for R.C.C work including cutting, bending, binding, tying the grills and placing in position including cost of steel etc. with all labour, materials, T&P, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 18, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 24, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 daySep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender