Tender For A) Dismantling,Shifting And Erection Of 3.3Kv Oh Line And 440V Oh Line With Installation Of 630Kva Transformer 3.3Kv/440V Rating ,Ht And Lt Panel For Feeding Power To New Crusher, Camera And Proper Lighting At Coal Depot At Karma Ocp Under
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Sep 2026
4 days left
EMD
84100
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ramgarh → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for A) Dismantling,Shifting And Erection Of 3.3Kv Oh Line And 440V Oh Line With Installation Of 630Kva Transformer 3.3Kv/440V Rating ,Ht And Lt Panel For Feeding Power To New Crusher, Camera And Proper Lighting At Coal Depot At Karma Ocp Under Kuju Area. B) Dismattling, Shifting And Erection Of Oh Line, Providing Proper Lighting In Outsourcing Patch And Haul Road At Karma Colliery Under Kuju Area. C) Installation Of Isolation Transformer For 02 Nos. Road Weighbridge & Installation Of Sky Netting Lighting Arrestor At Road Weighbridge 1 At Karma Project Under Kuju Area.
BOQ
| Sl. No. | Item Description |
| 1 | A) Dismantling,shifting and erection of 3.3KV OH Line and 440V OH Line with installation of 630KVA transformer 3.3KV/440V rating ,HT and LT panel for feeding power to new crusher, camera and proper lighting at coal depot at Karma OCP under Kuju Area. |
| 2 | (i) 3.3KV OH Line |
| 3 | Dismantling of pole street light standard/ strut embedded in cement concrete foundation etc, as required. |
| 4 | Dismantling of over head lines comprising of copper/ aluminium over head conductor, Cl. wire, cross arms, insulators etc. as required. |
| 5 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 10.00 metre and upto 12.00 metre |
| 6 | Supplying and erection of galvanised stay set for 11 KV over head lines complete with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle (20 mm X 600 mm), 7/4.00 mm dia G.1. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required |
| 7 | Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) pole top bracket/ cross arm for single 11 KV qwer head line conductor complete with 50 mm X 6mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts ete and painting with primer and finish paint as required. |
| 8 | Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for two 11 KV over head line conductors complete with 50 mm X 50 mm X 6 mm (angle iron bracket welded to the chamel iron and complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required. |
| 9 | Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) double pole cross arm for three wire 11KV over head line conductors complete with through boks and nuts for clamping to the poles, 150 mm X 6 mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings. bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required. |
| 10 | Supplying and erection of a set of cross bracing FRLSame work for 11 KV over head line double pole structure having four members fabricated out of 50 mm X 50 mm X 6 mm angle iron to form a rectangle of minimum size 1400 mm width X 2500 mru height, complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts and nuts etc (as per drawing) and painting with primer and finish paint as required. |
| 11 | Supplying and erection of 11 KV pin insulator complete with large steel head G.L. pin, nuts, washers etc. as required. |
| 12 | Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised straia clamps, bolts, nuts, washers etc. as required. |
| 13 | Supply and fixing of 11 KV grade AirBreak Switch 6.30Amp horizontal type |
| 14 | Supply & Fixing of 11 KV/3.3KV grade Drop Out Fuse 400Amp |
| 15 | Supply of Gl wire 8 SWG for craddle guard |
| 16 | Erection of G.L. Wire No. 8 SWG including binding etc. as required |
| 17 | Erection of all aluminium conductor of 7/3.40 mm to 7/4.00 min diameter and above including binding etc, as required. |
| 18 | (i) 440V OH Line |
| 19 | Supplying of pre stressed cement concrete (PCC) pole conforming to IS: 785 at work site including required transportation. PCC pole 9.1 meter Long 280 kg |
| 20 | Erection of RCC/PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1:3:56) layer on top with including excavation and refilling etc as required. Abobe 8 metre to 11 metre |
| 21 | Erection of angle iton/ channel iron cross arm on wood/RCC/PCC/steel tubular/ rail pole etc. as required. For light fittings |
| 22 | Supplying & drawing/laying of PVC insulated XLPE aerial bunch power cable conductor H2/14 grade aluminium solid/stranded conforming to IS-14255-1995, alu, alloy insulated messenger 1100 volts grade cable of approved make in air with necessary material as per specification of required size as mentioned below-3x70 sq.mm, 1x16(st. light), 1x35 (insulated neutral messenger) |
| 23 | Supplying & fixing of aerial bunch cable accessories suspension clamp i/c required attachment for single core cable of approved make on pole with clamp, necessary material as per specification for required size. |
| 24 | Supplying &fixing of aerial bunch cable accessories tension clamp (dead end) i/c required attachment for single core cable of approved make in air with clamp, necessary material as per specification for required size. |
| 25 | Supplying & fixing of waterproof insulation piercing connector for aerial bunch cable i/c required attachment for single core cable of approved make in air with necessary material as per specification of required size as mentioned |
| 26 | Supply & Fixing of Smc A B Cable Distribution Box Size-450X375X200mm |
| 27 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 28 | Supply & Fixing of Aluminium Unarmoured cable single corel 100 voltage grade 35 sq mm |
| 29 | Supply & Fixing of Aluminium Tubular Lug 35 sq mm |
| 30 | Supply and fixing of 18 KW, 3 phase, 440V, 50Hz street light controller with Over load protection and timer controls, IP rating- IP54 |
| 31 | Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required. |
| 32 | Dismantling of over head lines comprising of copper/ aluminium over head conductor, Cl. wire, cross arms, insulators etc. as required. |
| 33 | (iii) Making of foundation and shed of Transformer & VCB |
| 34 | Earth work in excavabon by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. |
| 35 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6(1 cement :6 coarse sand) |
| 36 | Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1cement: 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick |
| 37 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement: 4 coarse sand: 8 graded stone aggregate 20 mm nominal size) |
| 38 | Supplying and filling in plinth with sand under floors, including watering. ramming, consolidating and dressing complete. |
| 39 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/m² |
| 40 | Providing corrugated G.S. sheet roofing including vertical/ curved surfacefixed with polymer coated J or L hooks, bolts and nuts 8 mm diameterwith bitumen and G.I. limpet washers or with G.I. limpet washers filledwith white lead, including a coat of approved steel primer and two coatsof approved paint on overlapping of sheets complete (up to any pitch inhorizontal/ vertical or curved surfaces), excluding the cost of purlins, raftersand trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/m² Shed dimention: |
| 41 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer usingstructural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 42 | Installation of Transformer, VCB and LT panel |
| 43 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade |
| 44 | B) Dismattling, shifting and erection of OH line, providing proper lighting in outsourcing patch and haul road at Karma Colliery under Kuju Area. |
| 45 | Dismantling of pole/ street light Mandard/sirut embedded in cement concrete foundation etc, as required |
| 46 | Dismantling of over head lines comprising of copper/aluminium over head conductor, Cl. wire, cross arms, insulators etc, as required. (18spans 40m 3wires-2160m) |
| 47 | Erection of metallic pole of following length in cemem concrete 1:3:6(1 cement: 3 coarse sand: 6 graded stone aggregate 400 mm nominal size) foundation including excavation and refilling etc., as requireid Above 10.00 metre and upto 12.00 metre |
| 48 | Supplying and erection of galvanised stay set for 11 KV over head line complete with 19/20 mm dia X 1.8 metres long tay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, siny clamps, turn buckle (20 mm X 600 mm), 7/4.00 mm dia G.1. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required |
| 49 | Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) pole top bracket/cross arm for single 11 KV over head line conducior complete with 50 mm X 6mm flat iron clamp, bolts, nuis and washers including drilling holes for insulator pins, holts and nuts etc and painting with primer and finish puint as required |
| 50 | Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per mette) cross arm for two 11 KV over head line conductors complete with 50 mm X 50 mm X 6 mm (angle iron bracket welded to the channel iron and complete with 50 mm X 6mm M.S. flat iron clamps. bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required. |
| 51 | Supplying of two lengths of channel iron 75 mm X 40 min X 6 mm (7.14 kg per metre) double pole cross arm for three wire 11KV over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for Insulatos plus fittings, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required |
| 52 | Supplying and erection of a set of cross bracing FRLSame work for 11 KV over head line double pole structure having four members fabricated out of 50 mm X 50 mm X 6 mm angle iron to form a rectangle of minimum size 1400 mm width X 2500 mm height, complete with 50 mm X 6mm M.S. flat iron clamps, boits and nuts including drilling holes for insulator pins, bolts and nuis etc (as per drawing) and painting with primer and finish paint as required |
| 53 | Supplying and erection of 11 KV pin insulator complete with large steel head G.l. pin, cuts, washers etc, as required |
| 54 | Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, bell and socket type and complete with galvanised strain clamps, bolts, nuis, washers eic, as required. |
| 55 | Erection of all aluminium conductor of 7/3.40 mm to 7/4.00 mm diameter and above including binding etc. as required. (23spans 40m 3wires=2760m) |
| 56 | Erection of all aluminium conductor of 7/1.96 mm to 7/3.110 mm diumciet including binding etc. as required. (18spans 40m*1 wine for earth continuity in line) 720m @214kg/kn |
| 57 | Supply of PCC pole 9mir, 400Kg weight |
| 58 | Erection of metallic pole of following length in cement concrete 1:3-6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc, as required. Above 8.00 meire and upto 10.00 mtrs |
| 59 | Erection of angle iron/ channel iron cross arm on wood/ACC/PCC/steel tubular/ rail pole eic, as required. For light fittings |
| 60 | Supplying & drawing/laying of PVC insulated XLPE aerial bunch power cable conductor H2/114 grade aluminium solid/stranded conforming to IS-14255. 1995, alu, alloy insulated messenger 1100 volts grade cable of approved make in air with necessary material as per specification of required as as mentioned below-3x70 sq.mm, 1x16(st. light), 1x35 (insulated neutral тевменует) (44spans *35m |
| 61 | Supplying & fixing of serial bunch cable accessories suspension clamp ve required attachincot for single core cable of appro make tai pole witit clаnр, песessary material as per specification for required size |
| 62 | Supplying &fixing of aerial bunch cable accessories tension clamp (lead end) i/c required attachment for single core cable of approved make in air whi clamp, necessary material as per specification for required size |
| 63 | Supplying & fixing of water proof insulation piercing connector for seriul bunch cable l/c required attachment for single core cable of approved make in air with necessary material as per specification of requite size as menilonce below-Main 50-150sq.mm |
| 64 | Supply & Fixing of Smc A B Cable Distribution Box size - 450*375*200 mm |
| 65 | Earthing with copper earth plate 600 mm X 600 min X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long ete. with charcoal/coke and salt as required |
| 66 | Supply & Fixing of Aluminium Unarmoured cable single core 1100 voltage grade 35 sq mm |
| 67 | Supply & Fixing of Aluminium Tubular Lug 35 sq mm |
| 68 | Supply and fixing of 11 KV grade AirBreak Switch 630Amp horizontal type |
| 69 | Supply & Fixing of 11 KV/3.3KV grade Drop Out Fuse 400Amp |
| 70 | Installation of 25KVA, 3.3KV/220V transformer on DP |
| 71 | Supply and fixing of 18 KW, 3 phase, 440V, 50Hz street light controller with Over load protection and timer controls, IP rating- IP54 |
| 72 | Supply of Gl wire 8 SWG for craddle guard (6 spaus*4*40m) @110Kg/Km |
| 73 | Erection of G.1. Wire No. 8 SWG including binding etc, as required. |
| 74 | C) Installation of Isolation transformer for 02 nos. road weighbridge & installation of sky netting lighting arrestor at Road Weighbridge 1 at Karma Project under Kuju Area. |
| 75 | Erection of pole of following length in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40mm nominal size) foundation including xcavation and refilling etc, as required. Above 1000 metre and upto 12.00 metre |
| 76 | Supply and erection of approved make safe earthing electrode consisting pipe-in-pipe technology as per IS 3043-1987 made of corrosion free G.1. pipes with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for effective and maintenance free earthing in earth pit of minimum bore dia. 150mm size, as mentioned below With 3 metre G.1. pipes having outer pipe dia of 50mm having 80-200 micron galvanizing, Inner pipe dia. of 25mm having 200-250 Micron galvanizing, connection terminal dia. of 12mm. in nominal soil with 50 kg (two bag) back filling bentonite compound UL listed and confirm to relevant International/Indian standards around electrode upto ground level |
| 77 | Supply & Fixing of Post Insulator, 10KA, 11KV rated, standard size |
| 78 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement: 4 coarse sand) Fur okt Earth pits 012 M X 0.75 MH XD SO MUNSND CUM |
| 79 | Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg permetre) cross arm for two 11 KV over head line conductorscomplete with 50 mm X 50 mm X 6 mm (angle iron bracket welded to the channel iron and complete with 50 mm X 6mm M.S. flatiron clamps, bolts and nuts including drilling holes for insulatorpins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required |
| 80 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:15:3 (1 cement: 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) 0.75 Mu X 0.75 Mu X 0.12 Mu X 6 Nos 0.41 CU M |
| 81 | Steel reinforcement for R.C.C. work including straightening, cutting, bending. placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 82 | Providing and fixing of Lighting Arrestor Trishul type |
| 83 | Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required. |
| 84 | Supply & Fixing of 5 KVA 1 Phase Copper Wound Isolation Transformer |
| 85 | Supply & Fixing of Aluminium armoured single core flexible type 1100 voltage grade 35 sq mm |
| 86 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required 25 mm |
| 87 | Supply & Fixing of Aluminium Tubular Lug 35 sq mm |
| 88 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender