Tender For Renovation Of Main Block, Extension Block, Ancillary Block And Beautification Of External Area Of Haryana Bhawan, New Delhi.
Tender Value
8.17 Crore
Estimated cost
Bid Submission
17 Sep 2026
3 days left
EMD
16.34 Lakhs
Bank guarantee accepted
Document Fee
20000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurgaon → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Main Block, Extension Block, Ancillary Block And Beautification Of External Area Of Haryana Bhawan, New Delhi.
BOQ
| Sl. No. | Item Description |
| 1 | Recovery of brickbats |
| 2 | Recovery of brickbats @ 400 per cum |
| 3 | Providing and laying Kajaria Gozzio Beige Polish vitrified floor tiles of size 1200 x 1800 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make, in all colors shades, laid over base on 3 to 5mm thick adhesive of reputed brand as per IS specification 15477-2004, including pointing the joints with white cement and matching pigments etc. and tiles approved by the Engineer-in-charge. [N.S.] |
| 4 | Providing and laying Kajaria Bonaldo Crema Marble Tech Main wall tiles of size 1200 x 1800 mm conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colors shades, as approved by Engineer-in-charge, in skirting and dados over 4mm thick Polymer adhesive and jointing, including pointing in white cement mixed with pigment of matching shade complete. [N.S] |
| 5 | Providing and fixing plain plaster of Paris false ceiling for corridor with G.I frame with Jali of heavy gauge and 20mm thick (average) of approved brand plaster of Paris complete as per design and instructions of Engineer- in-charge. [N.S.] |
| 6 | Providing and fixing of 16.75mm HD HMR Plain Board on merino hard wood frame with one side 3.5mm teak ply, with screws and fitting wherever required complete as per architectural drawings and complete in all respect as per the direction of Engineer in Charge. [N.S.] |
| 7 | Providing and fixing of high pressure 1.2 mm merino luvih laminate sheet of plain/ wood grain in gloss/ matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type S, including cost of adhesive of approved quality. [N.S.] |
| 8 | Providing and fixing of lock NEH-21 Antique brass finish 8` lock body 60mm cylinder one side cylinder key with other side know- with screw etc. complete in all respect as per the direction of Engineer-in-charge. [N.S.] |
| 9 | Providing and fixing of Godrej cylinderical lock antique brass finish with complete screw etc. complete in all respect as per the direction of Engineer-in-charge. [N.S.] |
| 10 | Providing and applying polyurethane (PU) Polish on wooden surface including preparation of surface by rubbing with emery paper, applying wood filler where required , applying one coat of PU sealer, sanding smoothly and applying two or more coat of PU polish of approved shade and make to achieve smooth, uniform and glossy/matt finish complete in all respect as directed by the Engineer-in-charge. [N.S] |
| 11 | Providing and fixing CP Odonil Container of approved quality and colour Make- Camary, parryware, Hi- life [L.R.] [N.S.] |
| 12 | Providing and fixing of brushed anti finger print stainless steel shower enclosure 1000 x 1000 mm with inbuilt overhead shower, multi functional divertor, CP hand shower, CP brass sprout bib cock, including Brass faucet body with 2 inlet for hot and cold water along with all connecting legs / hose pipes etc. and wall flange complete in all respect. Make Jaquar /Grohe/ Parryware / Hindware [L.R.] [N.S.] |
| 13 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door / window / clerestory window and other frames (Chowkhat) comprising of virgin PVC polymer of K value 58–60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms), having minimum density of 650 kg/cum, with properties of being termite proof, borer proof, water/moisture proof and fire retardant, including fixing the frame in position with suitable fasteners/anchor fasteners complete in all respects, as per the direction of the Engineer-in-Charge.. 2) Frame size 45 x 85mm [New HSR 32.71.2] |
| 14 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) and 900 N (Edge), minimum compressive strength 50 N/mm², modulus of elasticity 850 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws, all as per direction of Engineer-in-Charge. (Note: Stainless steel butt hinges and necessary S.S. screws shall be paid separately). 1) 30mm thick [New HSR 32.72.1] |
| 15 | Providing and laying Italian marble inlay of thickness 18mm work, including additional support using L-brackets and pin system of Grade 304 or 316 stainless steel during installation. The visible edges shall be processed with high precision CNC router machines to achieve the required pattern with proper degree-mitre joints. Cutting shall be carried out using high-pressure 50 HP KMT water jet technology. All joints shall be sealed with high-grade, non-staining silicone or stone-coloured epoxy within grooves to accommodate thermal expansion, all as per the directions of the Engineer-in-Charge. [N.S.] |
| 16 | Providing and laying Italian marble in reception decorative back feature wall of thickness 18mm, including additional support using L-brackets and pin system of Grade 304 or 316 stainless steel during installation. The visible edges shall be processed with high precision CNC router machines to achieve the required pattern with proper degree-mitre joints. Cutting shall be carried out using high-pressure 50 HP KMT water jet technology. All joints shall be sealed with high-grade, non-staining silicone or stone-coloured epoxy within grooves to accommodate thermal expansion, all as per the directions of the Engineer-in-Charge. [N.S.] |
| 17 | Providing and laying Italian marble in reception exclusive design counter of approx size 12`x8`4` ft including additional support using L-brackets and pin system of Grade 304 or 316 stainless steel during installation. The visible edges shall be processed with high precision CNC router machines to achieve the required pattern with proper degree-mitre joints. Cutting shall be carried out using high-pressure 50 HP KMT water jet technology. All joints shall be sealed with high-grade, non-staining silicone or stone-coloured epoxy within grooves to accommodate thermal expansion, all as per the directions of the Engineer-in-Charge. [N.S.] |
| 18 | Providing and fixing of WPC sheet 30 mm and frosted glass in WPC frame, dash fasteners of required diameter and length, including all necessary fittings and finishing. The frame shall be properly aligned, fixed and finished with complete polishing work, all complete in all respects as per the directions of the Engineer-in-Charge. [N.S.] |
| 19 | Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 20 | Recovery of Flush Door |
| 21 | Removing and shifting of malba from the premises of Haryana Bhawan, New Delhi |
| 22 | Providing and laying Kajaria Bonaldocrema linea feature wall of size 600 x 1200 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make, in all colors shades, laid over base on 3 to 5mm thick adhesive of reputed brand as per IS specification 15477-2004, including pointing the joints with white cement and matching pigments etc. and tiles approved by the Engineer-in-charge. [N.S] |
| 23 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) and 900 N (Edge), minimum compressive strength 50 N/mm², modulus of elasticity 850 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws, all as per direction of Engineer-in-Charge. (Note: Stainless steel butt hinges and necessary S.S. screws shall be paid separately). 1) Frame size 45 x 70mm. [N.S.] |
| 24 | Providing and laying Kajaria Bonaldo crema blend floor tiles of size 1200 x 1800 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make, in all colors shades, laid over base on 3 to 5mm thick adhesive of reputed brand as per IS specification 15477-2004, including pointing the joints with white cement and matching pigments etc. and tiles approved by the Engineer-in-charge. |
| 25 | Providing and laying plain white quartz countertop in requird design and patterns, in linear as well as curvillinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-charge. [N.S] |
| 26 | Providing and fixing of 19mm IPE Wood decking with polishing and necessary clamps fixed with screws on existing structural steel works complete in all respect as the direction of Engineer-in-charge. |
| 27 | Providing and laying stone blasted finish granite flooring in required design and patterns in linear as well as curviliniar portions of the building all complete as per the architectural drawings with 30 to 35mm thick stone slab over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 28 | Removing of Malba from the premises of Haryana Bhawan, New Delhi |
| 29 | Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. |
| 30 | Providing and fixing factory made 25 mm thick green board door shutter, finished on both sides with 5.5mm thick High pressure Laminate (HPL) sheets of plain or wood grain pattern in gloss, matt or suede finish, conforming to IS: 2046 (Types S), including approved quality adhesive, edge finishing, all necessary fittings for fixing, labor and all incidental charges, complete in all respects as directed by the Engineer-in-charge. (NS) |
| 31 | Providing and fixing dry cladding up to 10 metre heigths polished granite stone with (machine cut edges) of uniform color and size up to 1m x 1m, fixed to structural steel frame work and / or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately.) [N.S.] |
| 32 | Item Description HSR Item |
| 33 | ALL HSR ITEMS AS PER DNIT Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender