Tender For Supply, Installation, Testing And Commissioning Of Ahus, Vfd Panels, Chilled Water Piping, Valves, Insulation, Etc. At Central Complex, Cdm And Pp Nursery Inside Barc, Trombay, Mumbai - 400085
Tender Value
3.08 Crore
Estimated cost
Bid Submission
28 Sep 2026
14 days left
EMD
7.27 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply, Installation, Testing And Commissioning Of Ahus, Vfd Panels, Chilled Water Piping, Valves, Insulation, Etc. At Central Complex, Cdm And Pp Nursery Inside Barc, Trombay, Mumbai - 400085
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 03-Sep-2026 | Pre-bid meeting date | Other | 28-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Supply, Installation, Testing and Commissioning of following AHU's complete with VFD enabled Motor, starter panel, cable, fittings etc. as per the Clause No. 1 of Technical Specification of the tender. |
| 2 | 40 TR Capacity |
| 3 | 30 TR Capacity |
| 4 | 20 TR Capacity |
| 5 | Supply, Installation, Testing and Commissioning of 20 TR DX Type AHU with Inverter Type Air Cooled Condensers with Controller complete, Temperature sensor, Electrically actuated Damper for fresh air as per Clause No. 2 of Technical Specification of the tender. |
| 6 | Supply, Installation, Testing and Commissioning of following PLC with instrumentations suitable for programing and automation of 20 TR DX type(Item No. 2) as per the Caluse No. 3 of Technical Specification of the tender. |
| 7 | PLC controller with programming, HMI display, Control panel complete with accessories and enclosure. |
| 8 | CO2 sensors with controller |
| 9 | RH sensors with controller |
| 10 | Temperature Sensor with controller |
| 11 | Supply, Installation, Testing and Commissioning of Minipleat HEPA filters overall size of filter 610 X 610 X 90 mm (Approx.), Capacity : 500 CFM, Efficiency : 99.97 % down to 0.3 microns particle size as per the Clause No. 4 of Technical Specification of the tender. |
| 12 | Supply, Installation, Testing and Commissioning of Box type pre filter overall size of filter : 592 X 592 X 50 mm (Approx.), Capacity : 1500 CFM, Efficiency : 95 % down to 10 microns particle size as per the Clause No. 5 of Technical Specification of the tender. |
| 13 | Supply, Installation, Testing and Commissioning of Flanged type microvee filter overall size of filter : 610 X 610 X 305 mm (Approx.), Capacity : 2000 CFM, Efficiency : 99.9 % down to 5 microns particle size as per the Clause No. 6 of Technical Specification of the tender. |
| 14 | Supply, Installation, Testing and Commissioning of PIBCV of following Sizes Complete with Actuator, temperature Controller, Temperature Sensor, fittings, matching flanges/Nipple, Suitable power Supply as per Clause No. 7 of Technical Specification of the tender. |
| 15 | 80 NB |
| 16 | 80 NB HF Type |
| 17 | 65 NB |
| 18 | 65 NB HF Type |
| 19 | 50 NB |
| 20 | Supply, Installation, Testing, and Commissioning of the following sizes of Class C GI pipelines, complete with suitable GI bends, Flanges, Gasket, fitting, high-density thermocol insulation with vapor barrier, plastering, and painting, etc. as per Clause No. 8 of the Technical Specification of the tender. |
| 21 | 150 NB |
| 22 | 80 NB |
| 23 | 65 NB |
| 24 | 50 NB |
| 25 | 40 NB |
| 26 | 25 NB |
| 27 | Supply, Installation, Testing, and Commissioning of 200 NB Class C MS ERW pipelines, complete with suitable bends, Flanges, Gasket, fitting, high-density thermocol insulation with vapor barrier, plastering, and painting, etc. as per Clause No. 9 of the Technical Specification of the tender. |
| 28 | Supply, Fabrication, Installation, Testing & Commissioning of MS ERW pipe line above 150 mm dia. for emergency breakdown job of chilled water pipe line as per Clause No. 10 of Technical Specification of the tender. ( Dia (Inch ) x Length (Mtr)) |
| 29 | Supply, Installation, Testing and Commissioning of Following Class 2,Gun Metal valves complete with Flanges, Fittings, Gasket, GI nut & bolts with washers, etc. as per the Clause No. 11 of Technical Specification of the tender. |
| 30 | Flange type 80 NB Gate Valve |
| 31 | Flange type 65 NB Gate Valve |
| 32 | Flange type 50 NB Gate Valve |
| 33 | Threaded type 25 NB Gate Valve along with MS socket, GI nipple |
| 34 | Threaded type 20 NB Globe Valve along with MS socket, GI nipple |
| 35 | Supply, Installation, Testing, and Commissioning of CI gate valves (PN 16) with GM internals of the following sizes complete with flanges, fittings, gaskets, GI nuts and bolts with washers, etc. to be installed in the existing chilled water pipeline after safe removal of existing valve as per Clause No. 12 of the Technical Specifications of the tender. |
| 36 | 300 NB |
| 37 | 250 NB |
| 38 | 200 NB |
| 39 | 150 NB |
| 40 | 125 NB |
| 41 | 100 NB |
| 42 | Supply, Installation, Testing and Commissioning of end suction pump with motor of following specification: flow: 23 CMH and head: 20 meter WC as per the Clause No. 13 of Technical Specification of the tender. |
| 43 | Supply, Installation, Testing and Commissioning of single stage double suction horizontal type split casing pump with motor of following specification: flow: 151 CMH and head: 40 meter WC as per the Clause No. 14 of Technical Specification of the tender. |
| 44 | Supply, Installation, Testing and Commissioning of following sizes of Flange Type PN 16 CI NRV complete with flange, gasket, GI nut & bolts with washers, etc. as per the Clause No. 15 of Technical Specifications of the tender. |
| 45 | 200 NB |
| 46 | 80 NB |
| 47 | Supply, Installation, Testing and Commissioning of following sizes of strainer complete with flange, gasket, GI nut & bolts with washers, thermocole insulation etc. as per the Clause No. 16 of Technical Specification of the tender. |
| 48 | Y-type Strainer 200 NB, Flange Type, CI Body and SS Screen |
| 49 | Pot Strainer 80 NB GI/HDG Body and SS screen |
| 50 | Welding joints of different sizes of MS/GI pipe as per the Clause No. 17 of Technical Specification of the tender. |
| 51 | Supply, Installation, Testing & Commissioning of magnehelic gauges of following range as per the Clause No. 18 of Technical Specification of the tender. |
| 52 | Magnehelic Gauge, Range 0-50 mm WC |
| 53 | Magnehelic gauges, Range 0-6 mm WC |
| 54 | Supply, Installation, Testing and Commissioning of 4'' dia. liquid filled Bourdon Tube SS Pressure gauges complete with SS Ball Valves and SS Siphon tube. Pressure gauge range from 0-10 Kg/cm2 as per the Clause No. 19 of Technical Specification of the tender. |
| 55 | Supply, Installation, Testing and Commissioning of following sizes of Liquid filled dial type temperature gauge, range 0 to 50 ºC complete with SS thermowell as per the Clause No. 20 of Technical Specification of the tender. |
| 56 | Temperature Gauge 6 inch dia dial |
| 57 | Temperature Gauge 4 inch dia dial |
| 58 | Supply, Installation, Testing and Commissioning self contained fully equipped personnel clean air shower made out of CRCA powder coated construction with standard finish available to decontaminate and regulate entry of personnel in clean room. Clean air of class 100 quality shall be directed inside the unit through different nozzles uniformly arranged on walls/ceiling of the unit to ensure effective distribution of filtered air in a closed loop circulation design so as to lift off the contamination from the personnel clothing etc. Overall outer dimension of the unit shall be 1800 x 1350 x 2300 (Ht.) mm as the Clause No. 21 of Technical Specification of the tender. |
| 59 | Supply and Installation of tubular electric heater capacity of 1 KW each for mounting inside AC duct to control high relative humidity (RH) inside clean room area as per the Clause No. 22 of Technical Specification of the tender. |
| 60 | Supply and Installation of following sizes of MS blank-off flange as per the Clause No. 23 of Technical Specification of the tender. |
| 61 | 150 NB |
| 62 | 100 NB |
| 63 | Supply, Fabrication and Installation of MS structure complete with two coats of red oxide and two coats of enamel paint as per Clause No. 24 of the Technical Specifications of the tender. |
| 64 | Supply, Fabrication and installation of HDG structure as per the Clause No. 25 of Technical Specification of the tender |
| 65 | Supply of paint and painting of pipelines, valves, chequere plates and MS structure complete with two coats of red oxide and two coats of enamel paint as per Clause No. 26 of the Technical Specifications of the tender. |
| 66 | Supply of high density thermocole insulation for repairing of existing overhead/underground chilled water pipelines of the following sizes complete with chicken wire mesh, vapour barrier, plastering and painting as per Clause No. 27 of the Technical Specifications of the tender. |
| 67 | Pipe size 250 NB |
| 68 | Pipe size 150 NB |
| 69 | Pipe size 50 NB |
| 70 | Supply and Installation of 25 mm thick closed cell rubber insulation complete with suitable cladding as per Clause No. 28 of the Technical Specifications of the tender. |
| 71 | Supply and Installation of 24G aluminium cladding on existing pipe lines and ducts as per Clause No. 29 of the Technical Specifications of the tender. |
| 72 | Supply and Installation of SS bird screen of 2 mm thick wire, 25x25 mm mesh (squared gap), necessary 25 mm wide outer ss flange with nut and bolts to be provided on round shaped kitchen exhaust fans as per Clause No. 30 of the Technical Specifications of the tender. |
| 73 | Supply and Installation of washable 4 ply HDPE air filter of AHUs as per the Clause No. 31 of Technical Specification of tender. |
| 74 | Supply and Installation of SS water level indicator complete with glass tube designed for visual monitoring of water level, flanges and isolation valves suitable for 1 meter height water tanks as per the Clause No.32 of Technical Specification of the tender. |
| 75 | Supply, Installation, Testing & Commissioning 18 inch dia. Butterfly valve PN 10 with single phase electrical actuator as per the Clause No. 33 of Technical Specification of the tender. |
| 76 | Design of cooling tower for 1250 TR capacity centrifugal water chilling machine and submit the design report with design calculation and characteristic curves, air and water flow details. Detail drawing of cooling tower including water distribution system shall be submitted as per Clause No. 34 of the Technical Specifications of the tender. |
| 77 | Particle count and validation of class 10000 clean room as per USFD standard as the Clause No. 35 of Technical Specification of the tender. |
| 78 | Supply, Installation, Testing and Commissioning of GI Ducting of following thickness Complete with 19 mm closed rubber cell Insulation and suitable cladding as per the Clause No. 36 of Technical Specification of the tender. |
| 79 | Supply, Installation, Testing and Commissioning of VCD as per the Caluse No. 37 of Technical Specification of the tender. |
| 80 | Supply, Installation, Testing and Commissioning of following Air Distribution Grills as per the Clause No. 38 of Technical Specification of the tender. |
| 81 | Supply Grills with damper |
| 82 | Return Grills without damper |
| 83 | Supply and Installation of 25 thick open cell elastomeric form based acoustic insulation suitable for HVAC duct/plenum as per the Clause No. 39 of Technical Specification of the tender. |
| 84 | Carrying out civil work as per the Clause No. 40 of Technical Specification of the tender |
| 85 | Casting of PCC (1:2:4) |
| 86 | Casting of RCC (M30 Grade) |
| 87 | Excavation of PCC, RCC & hard soil |
| 88 | Complete overhauling of DX type air handling unit capacity of 8000 CFM (Two blowers), Static Pressure : 125 MM as per the Clause No. 41 of Technical Specification of the tender. |
| 89 | Complete overhauling of Blue Star make 5.5. TR capacity condensing units as per OEM maintenance recommendation as per the Clause No. 42 of Technical Specification of the tender. |
| 90 | Complete overhauling of Blue Star make 11 TR capacity water cooled packaged units as per OEM maintenance recommendation and as per the Clause No. 43 of Technical Specification of the tender. |
| 91 | Complete overhauling of Mihir make 25 TR capacity cooling towers complete with supply and replacement of fills, nozzle, float valves etc. as per Clause No. 44 of Technical Specification of tender. |
| 92 | Safe Removal of following AHUs complete with electrical panel, cable, damper etc and shifting to dumping Yard as per the Clause No. 45 of Technical Specification of the tender. |
| 93 | 40 TR Capacity |
| 94 | 30 TR Capacity |
| 95 | 20 TR Capacity |
| 96 | Safe Removal of Existing plenum/ducting of AHU complete with Insulation & Supporting MS structure and shifting to dumping Yard as per the Clause No. 46 of Technical Specification of the tender. |
| 97 | Safe Removal of existing chilled water piping size up to 100 NB complete with valves, Strainers, Insulation, Supporting MS structure etc. and shifting to dumping Yard as per the Clause No. 47 of Technical Specification of the tender. |
| 98 | Safe Removal of existing chilled water piping size above 100 NB complete with valves, Strainers, Insulation, Supporting MS structure etc. and shifting to dumping Yard as per the Clause No. 48 of Technical Specification of the tender. |
| 99 | Safe Removal of existing MS structure Supports and shifting to dumping Yard as per the Clause No. 49 of Technical Specification of the tender. |
| 100 | Safe removal of existing self contained fully equipped personnel clean air shower made out of CRCA powder coated construction approximate size of 1800 x 1350 x 2300 (Ht.) mm complete with accessories and shifting to dumping yard as per the Clause No. 50 of Technical Specification. |
| 101 | Supply, Installation, Testing & Commissioning of suitable VFD-enabled 10 HP induction motor for existing chilled water booster pump. Installation shall be carried out after safe removal of existing Motors as per the Clause No. 51 of the Technical Specifications of the tender. |
| 102 | Supply, Installation, Testing and Commissioning of MCC panel made out of 2 mm thick CRCA sheet and consisting of VFD drive for motor speed control complete with all other accessories suitable for following existing motor of chilled water pump and the VFD panel shall be connected with existing DOL panel and Motor as per the Clause No. 52 of Technical Specification of the tender. |
| 103 | VFD with MCC panel suitable for 22 kw motor |
| 104 | VFD with MCC panel suitable for 18.5 kw motor |
| 105 | VFD with MCC panel suitable for 7.5 kw motor |
| 106 | Supply, Installation, Testing and Commissioning of MCC panel made out of 2 mm thick CRCA sheet and consisting of 2 VFD drive along with bypass starter for motor speed control complete with all other accessories for chilled water pump motors in item no. 14 as per the Clause No. 53 of Technical Specification of the tender. |
| 107 | Supply, Installation, Testing and Commissioning of following sizes of power cable along with end termination as per the Clause No. 54 of Technical Specification of the tender. |
| 108 | 3.5C x 95 Sq mm aluminium armoured XLPE FRLSH cable |
| 109 | 3 C x 25 Sq mm copper armoured XLPE FRLSH cable |
| 110 | End termination of 3.5C x 95 Sq mm aluminium armoured XLPE FRLSH cable |
| 111 | End termination of 3 C x 25 Sq mm copper armoured XLPE FRLSH cable |
| 112 | 25 mm X 3 mm copper strip |
| 113 | 8 SWG copper wire |
| 114 | Supply, Installation, Testing and Commissioning of single phase 2 HP dewatering submersible pump complete with electrical panel and flexible canvas hose pipe as the Caluse No. 55 of Technical Specification of the tender. |
| 115 | Supply, Installation, Testing and Commissioning of Differential pressure transmitter suitable for VFD of chilled water pump complete with local display, signal/control cable, mounting accessories, suitable cold drawn copper tube, brass connector, etc. as per the Clause No. 56 of Technical Specification of the tender. |
| 116 | Supply, installation, testing & commissioning of suitable Copper Conductor shielded armoured, XLPE, FRLSH Cable suitable for signal/communication of differential pressure transmitter to VFD as per the Clause No. 57 of Technical Specification of the tender. |
| 117 | Supply, installation, testing and commissioning of End termination suitable for item no 57 & 61 with Brass Compression gland and interconnection & termination with suitable size copper lugs as per the Clause No. 58 of Technical Specification of the tender. |
| 118 | Supply, Installation, Testing & Commissioning of electromagnetic flow meter suitable for 50 NB GI pipe line along with transmitter, signal cable, local display unit as per the Clause No. 59 of Technical Specification of the tender. |
| 119 | Supply, Installation, Testing and Commissioning of flow indicator totalizer as the Clause No. 60 of Technical Specification of the tender. |
| 120 | Supply, Installation, Testing and Commissioning of copper conductor shielded armoured, XLPE, FRLSH Cable suitable for signal/communication of electro magnetic flow meter(item no 60) and flow indicator totalizer(item no 58) of as per the Clause No. 61 of Technical Specification of the tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 28, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 14 daysSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender