Tender For Providing Of Park At Rukmani Nagar In Ward 09 Poonamallee Municipality.
Tender Value
79 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
8 days left
EMD
79000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Of Park At Rukmani Nagar In Ward 09 Poonamallee Municipality.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation by manual means for Isolated, Combined and Other type foundations in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the departmental officers. |
| 2 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete SS.20B 10 cum |
| 3 | Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers. -Mixing by manual means |
| 4 | Supplying and erecting centering for plane surfaces such as RCC Floor/Roof Beam, Lintels, Cantilever Beams, Bed Blocks etc.. with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over Steel adjustable Span of Size 2m x 2m(expandable upto 3.60m) and Silver Oak Joists of Size 10 x 5 cm spaced at 50cm to 60cm c/c and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) Spaced at not more than 50 to 60cm c/c , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid). |
| 5 | Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.- Mixing by manual means |
| 6 | Providing and laying in position, standardised concrete Mix M-20 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without inspiring strength and durability with about (5 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost ofreinforcement grill and fabricating charges, centering and shuttering and also including laying,vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc.,complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials). |
| 7 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steelreinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire) |
| 8 | Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9\\" X 43/8\\"X 2 3/4\\" including finishing, curing, etc., complete complying with standard specification - 100CFT |
| 9 | Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including mortar plasticizer at 200ml per 50Kg of cement used , hacking the surfaces and curing, etc., in all floors complying with standard specification and as directed by the departmental officers |
| 10 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification |
| 11 | Supplying , fixing and roofing with colour galvalume sheet of 0.47mm thick with all necessary accessories such as J/V bolt and nuts of suitable length with suitable bitumen washers complete complying with standard specification and as directed by the departmental officers. |
| 12 | Paving the floor with best quality vitrified Tiles of following size and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 13 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete. (PWD SOR- M-0651) |
| 14 | Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications. |
| 15 | Supplying and laying Rubberised interlocking Paver block M40 grade 83mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, stone dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,. |
| 16 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 17 | Painting New Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 18 | FRP Door Sutter with FRP Door Frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and Solid Core FRP Shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., of sizes specified by Engineers. (SOR M-0394) |
| 19 | Supplying and fixing Mild Steel grills for windows, ventilators etc.,complete complying with standard specifications and as directed by the departmental officers. |
| 20 | Dadooing walls with following best approved quality, white / colour glazed tiles conforming to IS 15622 of following sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)- Dadooing with printed design colourglazed tiles of size 300 x 200 x 6mm |
| 21 | Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm \\"P\\" or \\"S\\" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings |
| 22 | Supplying, laying and jointing G.I. Pipes of approved quality and best variety of \\"B\\" class pipe of the following dia including labour fixing G.I. Specials, including charges for cutting and threading of pipes, cost of such specials with necessary teak wood 20mm PVC pipe (M-0875) |
| 23 | 20mm PVC Elbow (M-0887) |
| 24 | 20mm PVC Coupler(M-0881) |
| 25 | 20mm PVC Bend (M-0893) |
| 26 | 20mm PVC Tee (M-0899) |
| 27 | Suppling and fixing in position 15mm diameter brass / C.P screw down tap / pillar tap / swan neck tap (heavy duty) of approved make conforming to I.S.specifications and quality including cost of shellac, thread etc.complying with standard specifications and including cutting and threading wherever necessary (Q) |
| 28 | 110mm PVC pipe (M-0872) |
| 29 | 110mm PVC bend(M-0961) |
| 30 | 110mm PVC door Elbow (M-0945) |
| 31 | 110mm PVC vent cowl (M-1041) |
| 32 | Design, Supply, Installation, Testing & Commissioning of 1 Geyser Fountain consists of 3 H.P Openwell Unitsubmersible monoblock water-cooled pump 1 no. (Three phase – 2880 Rpm – 440 V – 50 Hz – Texmo or CRI or Kirloskar make) made up of high grade cast iron materials, water level dependent geyser jets 5 nos. made up of brass, ball joints 5 nos. made up of brass with nickel plating, IP 68 Grade Multi color 27 Watts – 12 Volts RGB nozzle mounted L.E.D lights 5 nos. made out of die cast stainless steel 304 Grade suitable to be fitted with emitter type power LEDs with all in one optical lens of 85% efficiency step tempered glass 8 mm with protection class of IP-68 I/C connection & water proof jointing etc as sealed with heat resistant, toughened glass provided with mounting cradle, Supreme make ASTM D1785 SCH 40 UPVC pipes, ASTM D2467 SCH 80 UPVC fittings & control valves and necessary electrical items like Floor mounted Control Panel made out of MS sheet including door with lock and key arrangement with powder coated finish along with – Incoming Mains, Outgoing MCB, Selector Switches, Phase Indicating Lamps including Panel wiring as required, 3 H.P panel board 1 no. L&T make consisting of isolated switch, phase lights, start and stop push buttons, contactor, relay, 40 amps 4 pole isolator Legrand / L&T make, 30 amps double pole Legrand / L&T make miniature circuit breaker for lights, necessary 1.5 Sq.mm 2core Havels / Polygon / Finolex make electric cables for lights and professional charges for fountain erection etc. complete as per standard specifications. |
| 33 | Supplying and fixing of Merry Go Round 6 Seater (FRP Seat). The cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.(CPE-25) |
| 34 | Supplying and fixing of Kids funsation VIII for 12 years old children to a height of 2.10 m with 80mm dia leaver and 40mm top bar with M.S pipes and FRP frames.handrail 20mm dia M.S pipe and the centre support is 80 mm dia M.S pie.The cost shall inclusive of all materials, labours, and fixing etc, completet as directed by the departmental officers |
| 35 | Supply and delivery Manufacturer, Exporter, Supplier, Retailer Coated Playground Double Bucket Swing, For Garden, Park, Pattern : |
| 36 | Supplying and fixing of four seater SeeSaw to a height of 0.50m with 80mm dia leaver and 40mm top bar with M.S. Pipes. The seater is of moulded plastic with heavy duty bush bearing. The cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.(Q) |
| 37 | Supplying and fixing of Slide for below 12 years old childrens to a length of 3.00m with 80mm dia leaver and 40mm top bar with M.S. Pipes. The seater is of moulded plastic. The ladder frame is made up of 25mm M.S.Pipe, hanrail 20mm dia M.S. Pipe and the centre support is 80mm dia M.S. Pipe The cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.(Q) |
| 38 | Supplying and fixing of Jungle Gym for below 12 years old childrens to a height of 2.10m with 80mm dia leaver and 40mm top bar with M.S. Pipes. The ladder frame is made up of 25mm M.S.Pipe, hanrail 20mm dia M.S. Pipe and the centre support is 80mm dia M.S. Pipe The cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.(Q) |
| 39 | Supplying and fixing of Two seater SeeSaw for below 12 years old childrens to a height of 0.50m with 50mm dia leaver and 40mm top bar with M.S. Pipes. The seater is of moulded plastic with heavy duty bush bearing. The cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.(Q) |
| 40 | Providing double seater arrangements with granite slabs over the 100 mm thick precast slab with nominal reinforcements and 230 mm thick, 600 mm height side brick walls and plastered with C.M 1: 5, 12 mm thick, white washing two coats. The cost shall include all labour and materials and as directed by the departmental officers.(Q) |
| 41 | Supply and fixing of 12.5 Mtr High Mast suitable for 180 km/hr wind speed and siitable for mounting Max 6.of luminaires consisting of : Head Frame, Movable lantern carriage, Double drum Winch 6mm 316 Grade, S.S Hoisting ropes of 7/19 construction Flexible Multicore cable Trailing cable -5core X 4sq.mm 1per mast Foundation Bolts & Nuts Anchor Plate & Template, Lightning finial Twin aviation light (GLS type), Power tool (Integral), Feeder Pillar for automatic operation, Casting of Foundation and Installation / Testing & Commissioning Supply, installation of 2 x 400 w SV with CG boxes and lamps.(Q) |
| 42 | Supply and fixing of 65 mm dia. (2 -1/2\\") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED street light fitting and SMC box with PVC unsheathed FRLS copper leads from SMC box to fitting and with painting of suitable colour .(Q) |
| 43 | Earthing as per PWD standard specification with on earth electrode of 2m class 'B' pipe of dia not less than 32mm complete. Brass cable event for suitable armoured LTUG cable with earth connection suitable of 4 X 16sqmm etc complete |
| 44 | Supply and erection of 4 x 6 Sqmm UG Copper Cable, including cost and coveyance of all materials to site and labour charges etc complete..(M-25860 |
| 45 | Supply and erection of 2 x 10 Sqmm UG Copper Cable, including cost and coveyance of all materials to site and labour charges etc complete..(M-2575) |
| 46 | Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosureDouble door(Metal) with 40A 4 pole MCB isolater as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark (like standard make) SD 179 |
| 47 | Wiring with 2x1.5sq.mm. PVC insulated unsheathed FRLSSC copper conducto of 1100V grade insuitable PVC rigidpipeon wall and ceiling with PVC accessories with TW witch box with 5AFT switch in flush with wall covered with hylumsheet of 3mm thick with painting of suitable colour for open PVC light/ fanpoint(for electronic regulator)( 5 points percoil)- SD 22 |
| 48 | Wiring with 2x1.5 sq mm (22/03mm) P.V.C. unsheathed copper Cable of 1100V grade suitable heavy gauge pvc pipe on wall with NS accessories with 150mm x 100mm x 75mm MS switch box 5A 3pin non inter locking system including CS Plug pin T.W. Box with painting of suitable colour with continuous earth wire connection by 14 SWG TC wire for plug point with painting. etc., Complete as per Standard Specification (SD 37) |
| 49 | Supply and fixing of 4' 18W Crystal Glass LED Tube Light Fitting |
| 50 | Supply and fixing of fancy glass shade and 11W CFL for BH Point. SD-80 |
| 51 | Chest Press |
| 52 | Tai Chi Spinner |
| 53 | Supply and errection of CCTV in the following items.Armoured cat-6 cable (M-2184) |
| 54 | POE switch for camera - 8 port (M-2193) |
| 55 | HARD DISK FOR NVR - HIGHER END 6 TB (M-2222) |
| 56 | Net work video record for CCTV 8 Channel - 1 SATA 1 No Hard disk (M-2196) |
| 57 | CCTV camera |
| 58 | RACK WITH ACCESSORIES - HIGHER END 6U Rack (M-2226) |
| 59 | I/O SOKET RJ 45 (M-2214 ) |
| 60 | I/O SOKET RJ 11 (M-2215) |
| 61 | Providing Landscapping with Trees and Plants The areas to be developed with the green carpet of Trees and Plants would be leveled with a mild uniform slope to void water stagnation problem and to provide clear view of the landscape from any point of the premise, after Leveling the prepared soil bed is raised to the necessary height and slope using rich soil mixture of red soil FYM ( farm Yard Manure’s) Micro nutrients, Fungicides would be spread Micro nutrients, Fungicides would be spread over the leveled ground for an height of 0.15mts. Then the ground would be watered for a week to enable the weeks in the prepared soil bed to germinate. The germinated weeds soil be removed completely. Then the developed lawn Tufts is spread over the prepared area form the lawn within 1 week (turfs are developed in our nursery in controlled chamber and treated to give resistance against the Fungal activities). Then the lawn has to be watered regularly so as to maintain its lush every day for a period of I month after planting / Turfing, But at the same time stagnation of water should be avoided as well as the weeding also be done to maintain the weds free Lawn. Hence the Grass would cover the ground so as form etc, complete as per standard specification. |
| 62 | \\"Supplying and Planting of Neem tree sapling of height 240–300 cm in polythene bag of size 20x21 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.\\" |
| 63 | \\"Supplying and Planting of Poovarasu tree sapling of height 240–300 cm in polythene bag of size 20x21 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.\\" |
| 64 | \\"Supplying and Planting of Pungam tree sapling of height 240 –300 cm in polythene bag of size 20x21 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.\\" |
| 65 | Supply and fixing of 20lit capacity tilting type stainless steel garbage bins in park area as per the site condition and as directed by the departmental officers. |
| 66 | Conducting of Geo Physical Survey for achieve maximum Quantity of water etc. |
| 67 | Drilling of Borewells anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 140 mm/150mm dia (For upto 300mm dia) and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs fuel, labour and drilling bentonite and water required for drilling at site. Site will be shown by the TWAD Board officers including construction of mud pit. Drilling of 140/150 mm pilot bore upto 60m Depth ending below ground level etc., complete. (WD-W0783) |
| 68 | Earthwork excavation and depositing on bank with initial lead of 10 metres and initial life of 2 metres hard stiff block cotton hard red earthy shales muran gravel stoney earth and earth mixed with small size boulders and hard gravelly soil as per SS-20B (WD-W0653) |
| 69 | Reaming 140/150 mm dia pilot bore to 300mm dia bore as directed by the TWAD Board Officer. Upto 60m depth ending below ground level etc., complete as per standard specification. (WD-W094) |
| 70 | Supply and delivery of following 150mm dia CS and RS casing pipe as pe IS 12818/2010 . including cost and conveyance of pipes with accessories to site etc., complete - CS Casing shallow depth (plain pipe) - (WD-M0027) |
| 71 | Labour Charges for inserting 150mm dia ( Casing pipes assembly with slots or with out slots) in the drilled hole including welding the joints etc., complete and supplying and packing the annular space with pebbles of size and quality as approved by the Executive Engineers of TWAD Board.(WD-W0830) |
| 72 | Supply and delivery of following PVC, GI Pipes and Specials including cost and conveyance of pipes with accessories to site etc., complete 50mm Upvc pipe (WD-M0051) |
| 73 | 50mm dia G.I Elbow (WD-M0594) |
| 74 | 50mm dia G.I flange set (WD-M0597) |
| 75 | 50mm dia G.I Nipple (WD-M0599) |
| 76 | 50mm dia MS clamp set (WD-M0617) |
| 77 | THREE PHASE PANEL BOARD- D.O.L WITH TWO LEVEL GUARD AND AUTO START - 2 phase panel board (TWAD SOR WD-M1909) |
| 78 | 4sqmm 3core flat cable (TWAD SOR WD - M1975) |
| 79 | 100AMS fues carrier (TWAD SOR 25-26 M-1394) |
| 80 | 50mm gate valve (TWAD SOR 25-26 WD-M0618) |
| 81 | 7/20 A/U.wise for service connection (TWAD SOR) |
| 82 | Supply and delivery of clear water vertical wet type 5HP ( 50 x 175 LPM) submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5 % - 2 HP Submersible pumpset (100X40Lpm) (TWAD SOR WD - M1620) |
| 83 | 3\\" dia PVC pipe 6ksc (TWAD SOR WD-M 0011) |
| 84 | 3\\" dia PVC coupling (TWAD SOR WD -M0106) |
| 85 | 3\\" dia PVC Elbow (TWAD SOR WD -M0112) |
| 86 | 3\\" dia PVC Tee (TWAD SOR WD-M0110) |
| 87 | 3\\" dia PVC Bend (TWAD SOR WD -M0108) |
| 88 | SupplyandfixingofTNEBmeterboardsuitablefor32Athreephaseserviceconnectionwith3Nos.32Afuseunit(500V)32Aneutrallinkandearthlink(1\\"x1/8\\"copperflat)onTWplankofsize600mmx450mmx19mmwithsupportingTWreepersof1\\"thickaneithersidewithpaintingwithsuitableboltandnutsforfixingtheTWplankonwallwithearthconnectionandinterconnectionwith7/20PVCinsulatedcopperwirefromEBmeter to fuse unit (SD 129) |
| 89 | Lowering PVC rigid pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste. For depth upto 2m PVC pipeetc., completed as per specifications. - 90mm dia pvc pipe (TWAD SOR WD -W0424) |
| 90 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.. (TWAD SOR WD -W0871 285) |
| 91 | Providing safe guard Arrangements fore borewell using Brickwork in cement morter 1:5 mix Alround the borewell with a minimum space of 90x60cm, plastering in side and out site cm.(Quotation) |
| 92 | Refilling the exeavatted earth into layer by layer including cost oflabour charges for filling watery and consolidation etc, complete as per specification.(PWD SOR WD-W0703) |
| 93 | Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cumPurifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20 Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact.(M-0722) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender