Tender For Comprehensive Maintenance To B/R Services In Md Accn At Maru Vihar In Domestic Area At Af Station Suratgarh
Tender Value
35 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
1 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganganagar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance To B/R Services In Md Accn At Maru Vihar In Domestic Area At Af Station Suratgarh
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 18-Sep-2026 | Corrigendum_01 | BOQ | 28-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | BOQ (COMPREHENSIVE MAINTENANCE TO B/R SERVICES IN MD ACCN AT MARU VIHAR IN DOMESTIC AREA AT AF STATION SURATGARH ) |
| 2 | Demolition of cement concrete (un-reinforced ) of any description in ground floors and paving not exceeding 15 cm thick (below or above the ground level) and removing rubbish from the premises. complete all as specified and directed. |
| 3 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each and removing from site complete all as specified and direcetd. |
| 4 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each and removing from site complete all as specified and direcetd. |
| 5 | Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 sqm each and removing from site complete all as specified |
| 6 | M&L Factory made Pressed steel frames of size 105mmx60mm made of 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified. |
| 7 | M&L for Pressed steel frames of size 125mmx60mm made of 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified. |
| 8 | M&L for PCC 1:3:6 type C0 (using 12.5mm graded stone aggregate) as in hold fast iron fixing and back filing of pressed steel door frame including necessary form work all as specified. |
| 9 | S&F factory made 35mm thick 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkatsNote: Glass/wire gauge shall be measured and paid for seperately. |
| 10 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified. |
| 11 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification. |
| 12 | S&F butt hinges, medium weight, cold rolled, mild steel 100 mm long (ISI marked), complete all as specified. |
| 13 | S&F as in replacement Aluminum handles, 150 mm size cast type complete all as specified and directed. |
| 14 | S&F aluminium anodised, barrel tower bolt of extruded section and fixed, 200mm long (ISI marked), complete all as specified. |
| 15 | S&F aluminium alloy, 16mm dia and 250mm long anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or excluded sections and fixing bolts and sliding bolts of excluded sections or cast aluminum alloy and fixed, complete all as specified. |
| 16 | All as per srl item No 14 here in before but mild steel sliding door bolt 300 mm long stove enamelled black with bright bolt not less than 12 mm dia. complete all as specified. |
| 17 | S&F galvanised Steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, complete all as specified and directed. |
| 18 | All as per srl Item No 16 here in before but fixed as in replacement. |
| 19 | M & L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each panes as specified. |
| 20 | Supply and fix in replacement factory made mild steel cupboards shutters 1 mm thick with frame made from 1.25 mm thick sheet including all fittings i.e. mortice lock with handle ,butt hinges ,peg set of three etc including two coat of synthetic paint over primer complete all as specified and directed. |
| 21 | S&F stainless steel 20 mm dia curtain rod thickness of pipe not less than 1.0 mm including stainless steel brackets and stainless steel end knobs fixed with plugs & screws, complete all as specified and directed. |
| 22 | S&F contineous (piano) hinges, mild steel, bright finish width of flaps (when opened) 30 mm. Complete all as specified and directed. |
| 23 | S&F Hasp & staple 100 mm long safety type , brass with mild steel hinge pin including bolt to hinge plate. Complete all as specified and directed. |
| 24 | M& L in replacement for 18mm thick solid HDHMR board with sunmica leminated sheet of thickness not less than 1.0 mm on both side of two different colours (colour finish) as in kitchen cabinet shutter, jointed to form cabinet by means of Adhesive Solvent and fixed using Self-tapping Aluminium Screws, including beddding, providing & fixing of Stainless steel piano hinges suitable for 18/19 mm HDHMR Board (minimum of 02 Nos for Each leaf ) to hold cabinet shutter , Stainless Steel Silver chrome Door Handle 100mm long (01 No for each leaf of shutter), complete all as specified and as directed. Note: (a) Quoted unit Rates are inclusive of PVC board, hinges, screws and adhesive etc.(b) For the purpose of payment area of board alongwith decorative laminated sheet shall be measured. |
| 25 | S&F of 30mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type back side and one face is covered with decorative face veneer with lipping/frame to match, fitted to chowkats complete all as specified and directed by Engr-in-Charge. |
| 26 | Factory made single extruded WPC (Wood Polymer omposite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 27 | M&L for 18 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to aluminium frame work ,complete all as specified and as directed. |
| 28 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt inges and necessary S S screws shall be paid separately) |
| 29 | S& F in replacement factory made box type glazed and gauged steel window/ventilator made out of ERW hollow P&T section (50X25MM). Both window to be welded together with flat iron 25x3mm to outer frames on both sides complete all as specified including MS grill complete and including shop coat redoxide primer with following fittings welded to frame/shutter:-(a) Hold fast 150mm long 25mmx6mm iron made to shape-02 Nos in each window (both sides)(b) Handle of 'Z' section 20mmx25mm Each leaf(c) 100mm stopper-01 No per leaf.(d) MS tower bolt 150mm long - 02 Nos in each leaf.(e) Cleat 55mm long of hollow square 15mm x 15mm x 24mm welded to hinges gauze wall thickness welded to hinges of 50mm size-01 No per leaf.(f) MS box type hinges of size 75x12mm-03 Nos per leaf(g) Fabrication & fixing complete(h) Flat iron for fixing wire gauge to gauge window Glass pane, wire gauge work complete.Note:- (i) Glass panes, wire gauze and painting shall be measured & paid Separately under respectiveii) Design shall be got approved from the Engineer-in-charge |
| 30 | Resecuring,easing or adjusting without taking down /window shutters of any size for easy operation, tighting hinges, adjusting position of hinges, tower bolts, sliding bolt etc including provision of necessary screws complete all as specified and directed. |
| 31 | S&F as in replacement floor door stopper of aluminium alloy body tounge, anodised with hard drawn steel spring with overall length of cover plate 140mm long complete all as specified. |
| 32 | S&F as in replacement Aluminium anodised barrel tower bolts, 150 mm long , of extruded section and fixed . complete all as specified. |
| 33 | Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fastenersof required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snapbeading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-chargeNote :- Glass shall be measured and paid separately. |
| 34 | S & F framed work such as grills, gratings etc with ends of bars shouldered and/or revited or forged into spikes framed guard bars and similar works conforming to Fe-410 or Fe-310-0 and embeded in concrete over compound wall incl necessary welding to the existing grills complete all as specified |
| 35 | S&F powder coated any colour Anodised aluminium frame for doors, windows, ventilators (minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 36 | M&L sheet glass 5.5mm thick, ordinary quality and glazing with, rubber packing exc 0.5 sq m in each pane complete all as specified and as directed by the Engineer-in-Charge |
| 37 | S&F as in replacement Mortice lock, vertical type, size 100 mm made of brass with two lever complete all as specified |
| 38 | S & F Aluminium die cast body door closer hydraulically regulated designation No. 3, universal type suitable for door shutter 851 to 1000 mm in width and 61 to 80 Kg in weight complete all as specified and directed. |
| 39 | All as per srl item No 37 here in before but door closer fixed as in replacement. |
| 40 | S&F as in replacement Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and complete all as specified and directed. |
| 41 | Supply & fixing powder coated aluminium (minimum thickness of powder coating not less than 50 micron) sliding window three track with frame & two numbers glass shutters using 4 mm thick glass (tinted ) and one number shutter with stainless steel wire gauge wire cloth 0.31 mm nominal dia of wire and width of aperture 1.61 mm complete window using aluminium powder coated sections including aluminium cleat, PVC track, bearing, handle lock, rubber beading, beading for securing the wire cloth etc complete fittings as approved and directed. Size of aluminium sections for frame and shutters shall be as under :-(A) Three Track Frame :-(a) Bottom frame :- Jindal 2010, Section 20620 or Techno commercial equivalent as approved by GE.(b) Top and vertical frame - Jindal 2010, Section 20621 or Techno commercial equivalent as approved by GE |
| 42 | M&L for 1st class hard wood (Teak) Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed |
| 43 | M&L for 75mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) in sub base,flooring, pavings etc complete all as specified and as directed. |
| 44 | M&L 1st quality Vitrified ceramic tiles 10mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or colour cement to match with and including provision of 15 mm thick screed bedding in CM (1:6), complete all as specified and directed. |
| 45 | M&L 1st quality Vitrified ceramic tiles 10mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 Sqm for vertical surfaces skirting/Dado etc., set and jointed in neat cement slurry and pointed in white or colour cement to match with and including provision of 15 mm thick screed bedding in CM (1:6), complete all as specified and directed. |
| 46 | M&L for 75 mm thick plain cement concrete 1:3:6 type C-2 , using 40 mm graded crushed stone aggregate as in floor, laid in slope of 1:12 and surface finished even and smooth without using extra cement including making joint at 2.5 m interval and at each corner the joint shall be filled with bitumen mastic filling to full depth (comprising one part hot blown bitumen 85/25 and two part of sand). Complete all as specified and directed. |
| 47 | M&L for First quality glazed ceramic coloured tiles of (450x350mm) x 7 mm thick, laid on vertical surfaces of wall such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM (1:4) set and jointed in neat cement paste of honey like consistancy and pointed in white or coloured cement to match the shade of tiles with & including dismantling of existing tiles of any description ,complete all as specified and directed by the Engineer in Charge. |
| 48 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing ),and removing rubbish off the premises , complete all as specified and directed by Engineer-in-Charge |
| 49 | M&L for First quality, Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sq.m but not exceeding 0.18 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles,with complete all as specified and directed by the Engineer in charge. |
| 50 | All as per srl Item No 48 here in before but as on vertical surfaces with and including screed of 10 mm thick in CM 1:4. complete all as specified and directed by the Engineer in charge. |
| 51 | Taking down cement plaster on brick or concrete wall surfaces etc including raking out joints, hacking for key, scrubbing down with water and removing rubbish from the premises etc. complete all as specified and directed. |
| 52 | M&L for 12 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as on wall complete all as specified and directed. |
| 53 | Material and labour for 15 mm thick rendering in cement mortar 1:4 mixed with approved water proofing compound on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement all as specified and directed.Note: Water proofing compound shall be measured and paid separately. |
| 54 | M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces of roof projection/ ceiling and surface finished even and smooth without using extra cement, complete all as specified and directed. |
| 55 | M&L for rough cast plaster with a mixture consisting of crushed stone or fine gravel aggregate of size 6mm to 8mm as directed, mixed with coarse sand, fine sand and cement in the ratio of 1:1:1, finished even rendereing with under coat 15mm thick cement and sand mortar 1:3 complete all as specified and directed |
| 56 | M&L for preparation of new plastered surfaces of wall and applying two coats of oil emulsion distemper surface, complete all as specified and directed. |
| 57 | M&L for preparation of new plastered or unplastered surfaces of ceiling and applying two coats of white wash, complete all as specified and directed. |
| 58 | Applying two coats of exterior acrylic emulsion (weather proof treatment ), in camouflaging patterns, over new plastered surfaces , including preparation and using primer,complete all as specified and directed. |
| 59 | M&L for prepration of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 60 | M&L for prepration of new or previously untreated steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed. |
| 61 | S&F in replacement, PVC valveless, dual type, syphonic action type flushing cistern, 10 litres capacity, plunger type, low level, white with inlet, ball valve, float , 32 mm dia PVC long bend flush pipe 90cm long, complete all as specified and directed. |
| 62 | Supply and fixing in replacement, wash hand basin vitreous china flat back 450 x 300 mm size white, first quality, with and including PVC waste coupling 32mm size, PVC waste pipe 32mm bore, brackets of Mild Steel angle iron (35mmx35mmx5mm) of suitable size including two coat of synthetic enamel paint over a coat of primer over angle iron brackets to walls complete all as specified and as directed. |
| 63 | S&F in replacement stainless steel sink with drainage board made of 1.00 mm thick sheet for kitchen or with plugs washers & wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm with bowl size 410mm x330mmx200mm, with and including PVC waste pipe and CP waste coupling 32mm and making good to disturbed surfaces, complete all as specified and directed. |
| 64 | All as per srl item No 62 here in before but kitchen sink with out drainage board and overall size 495 x 420 mm and bowl size 410 x 330 x 160 mm. complete all as specified and directed. |
| 65 | S&F as in replacement 15mm bore Pillar taps cast copper alloy, with capstan head, fancy type, chromium plated weight not less than 665 gm, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe |
| 66 | S&F in replacement stop/angle valves, 15mm bore, fancy type, chromium plated, cast copper alloy having weight not less than 575 gm, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., complete all as specified and directed. |
| 67 | S&F in replacement PVC connection 15mm dia, 600mm long, hot water grade with brass chromium plated nuts and washers at both ends, complete all as specified. |
| 68 | S&F in replacement Brass chromium plated shower rose of 125mm size with or without swivel joints with arms suitable for 15mm bore pipe, complete all as specified. |
| 69 | S&F in replacement, 15mm bore, wall mixer, fancy type, chromium plated weight not less than 1 Kg , cast copper alloy, with capstan heads, screwed down, high pressure, with or without lettered `Hot’ or `Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified. |
| 70 | S&F in replacement 600mmx450mm bevelled edge mirror of selected quality glass, mounted on or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 71 | S&F in replacement Stainless Steel Plate Rack 75x75x25 Cm in size, made out of Stainless Steel l.0mm thick with all Internal Fittings and fixing with Brass Chomium Plated Mild Steel Screws, complete all as specified and as directed. |
| 72 | S&F as in replacement PTMT ball valve 20 mm nominal size weight of ball valve not less than 210 gm high pressure with float and flynut. Complete all as specified and as directed. |
| 73 | S&F as in replacement PTMT bib tap having weight not less than 90 gm any colour high pressure screwed for iron pipes 15 mm bore. Complete all as specified and as directed. |
| 74 | S&F as in replacement Health faucet mild steel chromimum plated auitale for 15mm dia pipe with 1.25m long long flexible tube ABS wall hook including making connections and fixed and complete all as specified. |
| 75 | S&F in replacement plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated hinging device, all as specified and directed Engr-in-Charge. |
| 76 | S&F in replacement brass chromium plated grating 125mm dia with hole , complete all as specified and directed. |
| 77 | S&F as in replacement Rotational moulded plythelene white water storage tank tripple layered white coloured, 1000 litres capacity (cylinderical vertical with cxlosed top) hoisted with thread tank cover and fixed in position including GI tank nipple & with union(two nos each), including 20mm for ball valve brass high pressure, with polythene float and fly nut complete all as specified and directed. |
| 78 | All as per srl Item No 76 here in before but tank of capacity 500 Ltr. complete all as specified and directed. |
| 79 | M&L for Galvanised iron tubing 15mm bore,medium grade,with all fittings fixed to walls or ceiling or laid in floors, after fixing of pipe,incuding taking down of old rusted/u/s GI pipe removal from site. complete all as specified and directed..complete all as specified and directed |
| 80 | M&L for Galvanised iron tubing 20mm bore,medium grade,with all fittings fixed to walls or ceiling or laid in floors, incuding taking down of old rusted/u/s GI pipe removal from site, complete all as specified and directed.complete all as specified and directed |
| 81 | Cleaning and removing all scales and dirt etc from tanks of cap 500 Lt and from mouths of circulating pipe etc for any capacity ltrs capacity of tanks and removing rubbish from the premises as directed by eningeer -in-charge. (Note: Date of cleaning to be written on the tank after cleaning) |
| 82 | S&F in replacement Long Body Bib taps,15 mm cast copper alloy,chromium plated ,fancy type weight not less than 575 gm ,screwed down , screwed for iron pipe , complete all as specified and directed by the Engineer in Charge. |
| 83 | S&F in replacement bathroom PVC cabinet with best quality mirror, shelves inside, size 450mm x 300mm including required fittings all as directed. |
| 84 | S&F stainless Steel fancy type round D Drawer Cabinet Handles, 75mm complete all as directed by Engr-in-Charge |
| 85 | Supply & fixing of auto soft closing hinges openable at or duck hinges for kitchen cabinet shutters. |
| 86 | S&F White Magnet Catchers of size 50 mm for Cupboard, including screws etc complete all as specified and directed. |
| 87 | Dismantling for Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified. |
| 88 | S&F Pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in roof covering/cladding to wall fixed with self tapping screws including side and end lap as per manufacturer’s instructionscomplete all as specified and directed. |
| 89 | M & L rolled mild steel as in framing for cladding and the like fixed with angle cleats and connecting plates Fe410-W (Gde-E-250) quality-A all as specified and directed by Engr-in- charge |
| 90 | Dismantling structural steel or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 91 | Supply only Integral waterproofing compound.complete all as specified and directed |
| 92 | M & L as in replacement 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each panes as specified |
| 93 | M & L for 4mm thick Figured glass pinhead type and glazing with oil putty in square not exc 0.50 Sqm in each panes as specified. |
| 94 | Taking down aluminium door/windows with frame of any description and any size, complete all as specified and directed. |
| 95 | S& Fixing in replacement 20mm bore gun metal, globe or gate valves, with iron wheel head , screwed both ends for iron pipe including opening the GI pipe and resecuring the GI pipe in the the same location. (no separate measurements for refixing of pipe will be given) |
| 96 | Petty repairs to leakage in bib tap, pillar tap, stop cock, Angle valve and low level flushing cistern etc of any description including changing the washer etc all as specified. |
| 97 | S&F in replacement spindles for 15 mm CP brass bib cock/stop cocks etc size 1 nos to 4 nos for full turn fittings/ half turn complete as directed. |
| 98 | Taking down shutters of any description etc exc 1 Sqm but nexc 2 Sqm & replacement of worn out damaged secondclass hardwood hanging styles etc & refixing in the same opening complete incl painting two coats of synthetic enamel paint over a coat of pink primer all as specified & directed |
| 99 | Taking down of existing PVC Door shutter & refixing in the same opening after necessary repairs like tightening of cleats , repairs to hinges , governing pivots etc all as directed to obtain smooth opening /closing operation. |
| 100 | S&F as in replacement PVC door seal of width 50 mm. complete all as specifeied & directed |
| 101 | Supply & Fixing as in replacement CP waste coupling 25 mm size with rubber gasket etc for SS sink complete all as specifeied & directed |
| 102 | Supply & Fixing as in replacement CP waste coupling 32 mm size with rubber gasket etc for WHB etc complete all as specifeied & directed |
| 103 | S&F in replacement PVC syphone with handle complete for low level flushing cistern all as directed. |
| 104 | S&F in replacement CP pressure JET for EWC including flexible pipe for 15 mm dia. complete all as specifeied & directed |
| 105 | S& Fixing in replacement small fittings galvanised iron medium grade such as sockets, elbow , nipple (up to size 200 mm), tee , union etc for 15mm bore pipe including opening the connected pipe and refixing in the same location (ISI Mark all as directed) |
| 106 | All as per Srl Item No . 104 above but for 20mm bore pipe |
| 107 | S& Fixing in replacement GI Tank connection Nipple 15 mm bore 75mm long. complete all as specifeied & directed |
| 108 | S& Fixing in replacement GI Tank connection Nipple 20/25 mm bore 75mm long. complete all as specifeied & directed |
| 109 | S& Fixing in replacement PVC water storage tank lid cover (Cylindrical) for 500 /1000 ltrs capacity tanks (Make : as per sample) |
| 110 | S&F of cantilever bracket for sink or wash hand basin complete all as specifeied & directed |
| 111 | S& F as in replacement of wooden beads 2nd class hard wood of any size in cup board & glazed or gauged joinery mitres etc all as directed by Engr-in-Charge (As per Sample). |
| 112 | S&F in replacement SS chromium plated bracket holder for curtain rods 20-25mm dia fixed with screws to pelmet boxes all as directed (Make : As per sample) |
| 113 | S&F in replacement bracket heavy duty fixed with screw complete. |
| 114 | S&F for Fancy type caps/ side Bulbs SS suitable for curtain rod in repair |
| 115 | S & fixing as in replacement internal assembly syphonic /non syphonic type for PVC flushing cistern of cap 9/10 Ltr Please Enable Macros to View BoQ information |
| 116 | S & fixing as in replacement internal assembly syphonic /non syphonic type for PVC flushing cistern of cap 9/10 Ltr Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 18, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 28, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 daySep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender