Tender For Repair Of Gate, Fencing, Area Drainage, Retaining Wall And Misc Work In Zone A Area At Nda Khadakwasla
Tender Value
49 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
19 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Gate, Fencing, Area Drainage, Retaining Wall And Misc Work In Zone A Area At Nda Khadakwasla
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 2 | M&L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) in surface channels and drains including necessary formwork complete all as specified and directed. |
| 3 | M&L for precast cement concrete block masonry with solid blocks 1:3:6 type C-1 (using 20 mm graded stone aggregate), and setting in cement mortar 1:6, complete all as specified and directed. |
| 4 | M&L (except block) for precast cement concrete block masonry with solid blocks, and setting in cement mortar 1:6, complete all as specified and directed.Note:PCC blocks obtained from item No.34 shall be used. |
| 5 | M&L for Precast Reinforced Cement concrete 1:2:4 type B0 (Using 12.5 mm graded stone aggregate) in 40 mm thick (measured solid) Jallies or louvers including all mouldings set jointed in CM 1:4 but excluding frame including demolition of existing cement concrete complete all as specified and directed. |
| 6 | M&L for Providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed . |
| 7 | M&L for walling of random rubble stone masonry uncoursed well bonded bedded and solidly hearted built in CM (1:6) brought upto coursed complete all as specified and directed |
| 8 | M&L 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, counter basins and like laid over and including screed bed 15 mm thick in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and complete all as specified and directed. (Note:- Granite to be used in treads shall be one piece with nosing at front and cutting two grooves alongwith nosing. Colour shall be of Lakha red, flamed granite or telephonic black as approved.) |
| 9 | M&L for running Welding in repairs and to make in original position of article in any length and thick of weld n exc 6 mm for purline, rafter, gate, chainlink fencing ,fencing post , MS door,collapsible gate,rolling shutter and misc MS Items (Height of bldg G+3) complete all as specified and directed. |
| 10 | S & F Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 11 | Fixing only Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.Note:-Angle iron obtained from dismantling shall be used under this item. |
| 12 | S & F Mild steel work in framed work such as decorative grills(ornamental and intricate design/pattern as approved by GE) in compound wall, gratings, framed guard bars, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tank and similar work confirming to Fe-290 Gde E-165 Complete all as specified and as directed . |
| 13 | M&L for taking down /dismantling and erection /resecuring in original position of steel gate after repair of opening n.exc 7 mtr any weight incl welding of any parts new/old, welding of pintal hinges, providing new pintal hinges ,aldrop,handle where ever reqd, fixing of pintal hinges with RCC column/wall complete all as specified and directed. |
| 14 | S&F Mild steel screw bolts diameter of neck 11 to 15 mm (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exc. 5 cm but not exc. 10 cm long complete all as specified and directed. |
| 15 | M&L mild steel round bars 10 mm dia and over, cut to length, bent to shape required, including hooking ends for securing chain link fencing, conforming to IS Fe 410-W(Gde.E-250), quality-A, complete all as specified and directed. |
| 16 | Fixing only in repairs chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc, and including provision of binding wire complete all as specified and directed. |
| 17 | Supply only chain link MS galvanized fencing, conforming to IS:2721:2003 of any size or type including line wires of 3.15mm dia, straining bolts etc including provision of binding wire complete all as specified and directed. |
| 18 | S & F as in repairs galvanized 2 strand steel barbed wire 2.24 dia barbed with 2mm dia barbed 75 mm spacing and straining and fixing to any type of standard rails strain-ing bolts including securing of tying at crossing with and provision of mild steel wire staples or steel pins etc complete all as specified and directed. (Each line of wire shall be measured separately) |
| 19 | Restraining and resecuring to existing barbed wire fencing including making good staples etc complete all as specified and directed. |
| 20 | Servicing and repairs to existing rolling shutters opening of size exceeding 6 Sqm but not exceeding 12 Sqm at and at all heights above floor level of sizes mentioned below comprising of removing the existing hood cover, rectifying damages, removing all shafts along with bearings, springs, gears etc. reconditioning/ adjusting the tension of springs, rectifying damages, if any, to laths, grills flats, bottom plates guide channels, locking arrangements, handles including providing end clips and pins, welding where required reassembling the shutter, refixing the same in original position. Lubricating all moving parts ,the new spare part shall be measured and paid separately, operating and commissioning the shutters to the entire satisfaction of the Engr-in-Charge complete all as specified and directed. . (Rate includes taking down and refixing of rolling shutter in same or other opening) |
| 21 | Material & labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 22 | M & L for 10 mm thick rendering in cement mortar 1:4 on block/stone walling surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 23 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 24 | Raking or cutting out Joints and decayed mortar etc ,washing the joints and keeping the surface to be pointed wet for 2 days prior to re-pointing in random rubble or polygonal rubble uncoursed or brought up to courses work built in cement mortar etc upto three storied bldg or 20m height complete all as specified and directed. |
| 25 | M&L for keyed pointing to random or polygonal rubble, uncoursed or brought upto courses in CM (1:4) upto and incl height 20m complete all as specified and directed. Note : Rates all as included for scaffolding, shuttering, ladder etc |
| 26 | M&L for Fire stone wall tile in exterior surface on vertical surfaces of approved pattern and size 10mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick plaster in C:M (1:4) as a backing coat complete all as specified and as directed. Make : Cart part- Fire stone Nutural of make Kajaria or equivalent in other makes as approved. |
| 27 | M & L for painting the new wall surface complete all as specified and directed as follows :- (a) Surface Preparation- Preparation of newly plastered or previously untreated surfaces of walls (b) Putty application- NIL (c) Priming surface- Applying a coat of cement based primer. (d) Painting- Applying two coats of weather coat exterior emulsion paint. (Note:- The rate are inclusive of necessary scaffolding) |
| 28 | M & L for painting the new wall surface complete all as specified and directed as follows :- (a) Surface Preparation- Preparation of newly plastered or previously untreated surfaces of walls (b) Putty application- NIL (c) Priming surface- Applying one coat of cement base primer (d) Painting- Applying two coats of cement base paint. |
| 29 | M & L for painting the old wall surface complete all as specified and directed as follows :- (a) Surface Preparation- Preparation of old plastered or previously untreated surfaces of walls (b) Putty application- NIL (c) Priming surface- NIL (d) Painting- Applying one coats of cement base paint. |
| 30 | M&L for raised pointing to random or polygonal rubble masonry, uncoursed brought upto courses in cement mortar 1:4 upto and including height 20m complete all as specified and directed.Note : Rates all as included for scaffolding, shuttering, ladder etc |
| 31 | M & L for painting the new steel surface complete all as specified and directed as follows :- (a) Surface preparation- Preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth (b) Priming surface- Applying one coat of red oxide primer (c) Painting- Applying two coats of synthetic enamel paint. |
| 32 | M&L preparation of new steel surfaces of any description, not otherwise described n.exc 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 33 | S & F in repairs PVC (SWR) pipe 110 mm bore, single socketed, in any length, one end socketed and other plain with rubber ring joints duly fixed with rubber adhesive cement solvent etc, fixed to walls complete all as specified and directed. |
| 34 | Demolition of precast cement concrete block/ stone boulder walling built in cement mortar or cement lime mortar including pillar etc below / above ground level etc and removing to a distance not exc 50 meter complete all as specified and directed. |
| 35 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar complete all as specified and directed. |
| 36 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided including padding concrete on roof complete all as specified and directed. |
| 37 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 38 | Dismantling of security fencing any type (chain link, barbered wire, GI mesh etc) fix in iron/concrete post including unscrewing the screw/ nut bolts, washers etc complete all as specified and directed. |
| 39 | Dismantling post or struts (wood, steel or RCC) any section, including taking out embedded portion in concrete, masonry etc and making good the disturbed ground complete all as specified and directed. |
| 40 | M&L PCC 1:2:4 type B-0(using 12.5 mm graded crushed stone aggregate) as in copings, bed plates, bed block for holdfasts, similar bands, plinth coarses, string coarses, lacing coarses, parapets nad railings upto 60 cm in height, filling in pressed steel door complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender