Tender For Repair/ Polishing/ Painting To Certain Wooden/ Steel Furniture And Canning Of Different Kinds Of Wooden Furniture At Cqa Area Aundh Under Ge (Mh & Rh) Khadki
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Sep 2026
17 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Polishing/ Painting To Certain Wooden/ Steel Furniture And Canning Of Different Kinds Of Wooden Furniture At Cqa Area Aundh Under Ge (Mh & Rh) Khadki
BOQ
| Sl. No. | Item Description |
| 1 | TABLE DINING 6/8 PERSONS: DRG NO: FD-273, 30(M) |
| 2 | M & L for removing unsv Top by Supply and fix new top of table dining 6 persons of size 1500x900mm made of 18/19mm thick Prelaminated Particale Board including 4mm thick TW edging alround to top to table dining 6 persons of size and shape all as shown on drg. |
| 3 | All as per item No 1.01 above but for table dining 8 persons of size 1500 x 900 x 18/19 mm complete. |
| 4 | Replacement of legs of table dinning 6/8 persons with new legs of size 75x40x750mm made of 1st class hard wood teak, size and shape all as shown on drg. |
| 5 | All as per Srl. Item No. 1.03 but long rails for 6 persons size and shape all as shown on drg. |
| 6 | All as per Srl. Item No. 1.03 but long rails for 8 persons. |
| 7 | All as per Srl. Item No. 1.03 but side rails for 6/8 persons. |
| 8 | All as per Srl. Item No. 1.03 but wooden bracket of size 100x100x25mm for table 6/8 persons. |
| 9 | PVC/hard rubber shoe |
| 10 | Chair Dinning Cushioned (FD/MAP-II/04):-M & L for removing of unserviceable/broken following parts of Chair dining cushion without damaging of other parts of chair, supply and fixing same new parts as shown on drg and specified and directed by Engr-in-Charge. |
| 11 | S & F 12mm thick MR Gde Plywood seat with cushion and Tapestory cloth. Cushion/Foam shall be 75mm thick of 32 density, (Tapestry cloth shall not be less than Rs. 250/- per RM). |
| 12 | S and F only seat cover of tapestry cloth (Tapestry cloth shall be not less than Rs. 250/- per RM). |
| 13 | Front leg of size 450x35x50mm |
| 14 | Rear leg of size 450x35x50mm |
| 15 | Back Vertical stripps 500x15x50mm |
| 16 | Back rest 450x25x45mm |
| 17 | Stiffener (Side & Central one) 450x20x25mm |
| 18 | Tightening of all parts/joints of entire Chair dining cushion with bamboo pins. |
| 19 | PEG TABLE (FD-277) |
| 20 | M & L for removing unsv Top by Supply and fix new top of size 450x300mm made of 18/19mm thick Prelaminated Particale Board including 4mm thick TW edging alround all as shown on drg. (Make of Partical board:-as per key specification) |
| 21 | M & L for removing unsv legs by Supply and fix new legs of size 50x30mm made of 1st class hard wood teak size & shape as shown on drg. |
| 22 | All as per item No 3.02 here-in-before but long batten/rail of size 40x20mm of table peg. |
| 23 | All as per item No 3.02 here-in-before but short rail/stiffener of size 40x20mm of table peg. |
| 24 | Corner made of 1st class teak wood to strengthen rail and leg all as specified by Engr-in Charge. |
| 25 | PVC/hard rubber shoe heavy duty complete all as directed by Engr-in-Charge. |
| 26 | SOFA SET 4 / 5 SEATER (FD-281) |
| 27 | M&L removing Old unserviceable cushion of sofa seat/back and provide new 100mm thick cushion (cool foam) 40 density (Make : as per key specification) covered with new tapestory cloth (not less than Rs 250/- per running mtr) size as per Drg and all as specified and as direcred by the Engineer-in- charge. |
| 28 | S & F new tapestry cloth of best quality not less than Rs 250/- per metre as per sample approved. size as per Drg and all as specified and directed by the Engineer-in- charge |
| 29 | M & L for removing unsv front/rear legs by Supply and fix new front/rear leg of 1st class hard wood teak of Sofa set of single seater/3 seater all as specified and shown on drg. |
| 30 | All as per item No. 4.03 here-in-before but arms. |
| 31 | All as per item No. 4.03 here-in-before but side rails. |
| 32 | All as per item No. 4.03 here-in-before but front & back rail of single seater sofa. |
| 33 | All as per Srl item No 4.03 here-in-before but front/back rail of sofa three seater (long seat). |
| 34 | TABLE DRESSING LADIES: DRG NO: FD-251 / FD- 232 |
| 35 | M & L for removing unsv looking Mirror of table dressing by Supply and fix new looking mirror of 5 mm thick (Make:- as per key specification) of size and shape as shown on drg and as directed by Engineer -in- Charge. |
| 36 | M & L for removing unsv frame of Mirror by Supply & fix new frame of mirror of table dressing ladies of teak wood of size and shape as shown on drg and directed by Engineer-in-Charge. |
| 37 | M & L for removing unsv back of table dressing mirror by Supply & fix new back of 6mm thick MR Gde plywood. |
| 38 | M & L for removing unsv cabinet/box by S & F of entire new cabinet/box of table dressing ladies made of 18/19mm thick Prelaminated Particale Board with 4mm thick teak wood beading all as shown on drg. |
| 39 | All as per Srl. Item No. 5.04 but drawers of table dressing ladies. |
| 40 | Chromium plated knob 25mm dia 24mm length of best quality as approved. |
| 41 | TABLE DRESSING GENTS :(FD-230/31) |
| 42 | M & L for removing unsv Looking Mirror by Supply and fix new 5mm thick looking mirror to table dressing gents (Make:- as per key specification) size and shape as shown on drg and as directed by Engineer -in- Charge. |
| 43 | M & L for removing unsv cabinet/box by S & F new entire cabinet/box made of 12mm thick Prelaminated Particale Board teak face shade exterior gde including 4mm thick TW edging all as shown on drg |
| 44 | M & L for removing unsv drawers by Supply and fix new drawers to table dressing gents of 12mm thick Prelaminated Particale Board teak face shade exterior gde including 4mm thick TW edging including aluminium anodise knob(dark black) all as specified and shown on drg. |
| 45 | M & L for removing unsv frame of mirror by Supply and fix new frame of mirror made of 1st class hard wood teak incl key plate size and shape as shown on drg. |
| 46 | M & L for removing unsv back by Supply and fix new back ply of mirror made of 6mm thick MR Gde plywood size and shape as shown on drg. |
| 47 | Fixing only fitting of loose / dismantaled / sagged table dressing gents to the wall with \\"L\\" Bracket (Pair) as per drg and all accessories such as screw, clips, plugs, clamps, etc complete all as directed by Engr-in-Charge.Note : Rate of bracket (pair) shall be deemed to be included in unit rate quoted. |
| 48 | TABLE CENTRE: DRG NO: FD-274, FD-235 |
| 49 | M & L for removing unsv by Supply and fix new top of table centre of size 900x450mm made of 18/19mm thick MDF board exterior gde including 4mm thick TW edging alround all as shown on drg. (Make as per key specification) |
| 50 | M & L for removing unsv legs by Supply and fix new legs of table centre of size 60x30mm made of 1st class hard wood teak size and shape as shown on drg. |
| 51 | All as per Srl. item No. 7.02 here-in-before but short rail/stiffener of size 50x25mm. |
| 52 | All as per Srl. item No. 7.02 here-in-before but long rail of size 50x25mm. |
| 53 | Supply and fixing with steel screw of triangular bracket of size 75x75x25mm of 1st class hard wood teak between legs and rails of Table Centre. |
| 54 | PVC/hard rubber shoe heavy duty complete all as directed by Engr-in-Charge. |
| 55 | TEAPOY WOODEN: DRG NO: FD-278 |
| 56 | M & L for removing unsv Top by Supply and fix new top of teapoy of size 600x450mm made of 18/19mm thick Prelaminated Particale Board exterior grade including 4mm thick teak wood beading alround all as shown on drg. (Make as per key specification) |
| 57 | M & L for removing unsv legs by Supply and fix new legs of teapoy of size 60x30mm made of 1st class hard wood teak of size and shape as shown on drg. |
| 58 | All as per item No 8.02 here-in-before but short stiffener/rail of size 60x25mm and shape as per show on drg. |
| 59 | All as per item No 8.02 here-in-before but long batten/rail of size 50x25mm & shape as per shown on drg. |
| 60 | Supply and fixing with steel screw of triangular bracket of size 75x75x25mm of 1st class hard wood teak between legs and rails of Teapoy. |
| 61 | PVC/hard rubber shoe complete all as directed by Engr-in-Charge. |
| 62 | TABLE WRITING: DRG NO: FD-35/249/275 |
| 63 | M & L for removing unsv Top by Supply and fix new top of size 1145x600mm made of 18/19mm thick Prelaminated Particale Board including 4mm thick TW edging alround to top of table writing size and shape all as shown on drg . (Make of Partical board:-as per key specification) |
| 64 | M & L for removing unsv legs by Supply and fix new legs of size 55x35x750mm made of 1st class hard wood teak size and shape all as shown on drg. |
| 65 | All as per Srl. Item No. 9.02 but stiffners (Centre) of size 50x25x 1145mm made of 1st class hard wood teak. |
| 66 | All as per Srl. Item No. 9.02 but side stiffener/rails of size 50x25x550mm of Table writing. |
| 67 | M & L for removing unsv drawers by S & F new drawers of size (as per Drg)made of 18/19mm thick Prelaminated Particale Board natural teak face shade on front side including with 6 mm thick ply wood to bottom of drawers including aluminium anodised knob and all as shown on drg. |
| 68 | M & L for removing unsv box/cupboard by S & F new Box/cup board of table writing made of 18/19mm thick Prelaminated Particale Board including wall catcher size and shape all as shown on drg. |
| 69 | All as per Srl. Item No. 9.02 but door shutter of cupboard. |
| 70 | Supply and fixing with steel screw of triangular bracket of size 100x100x35mm of 1st class hard wood teak between legs and rails of Table writing. |
| 71 | PVC/hard rubber shoe complete all as directed by Engr-in-Charge. |
| 72 | BOOK CASE: DRG NO: FD-45(M) / FD-237 |
| 73 | M & L for removing unsv Top by Supply and fix new Top of book case made of 18/19mm thick MR Gde plywood covered with 1.0mm thick laminated sheel with 4mm thick teak wood beading alround size and shape as shown on drg. |
| 74 | All as per Srl. Item no. 10.01 but sides of book case. |
| 75 | All as per Srl. Item No. 10.01 but shutters of book case including piano hinges and aluminium anodized knob. |
| 76 | M & L for removing unsv bottom by Supply and fix new bottom of book case made of 18/19mm thick MR Gde plywood with 4mm thick teak wood beadling all as shown on drg. |
| 77 | All as per Srl. Item No.10.04 but shelf of book case. |
| 78 | M & L for removing unsv back by Supply and fix new back of book case made of 6mm thick MR Gde plywood all as shown on drg. |
| 79 | M & L for removing unsv by Supply and fix new leg with batten frame of book case made of 1st class hard wood teak of size and shape as shown on drg. |
| 80 | POLISHINGMaterial and labour for french polishing with best quality french polish on exposed surfaces upto good looking after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed by Engineer-in-Charge. |
| 81 | All as per Srl. Item No. 11.00 here-in-before but Table dinning 6/8 persons |
| 82 | All as per Srl. Item No. 16.00 here-in-before but Book case small DRG NO: FD-237/45(M) |
| 83 | All as per Srl. Item No. 16.00 here-in-before but Chair Dinning Cushioned (FD/MAP-II/04) |
| 84 | All as per Srl. Item No. 16.00 here-in-before but Peg Table DRG NO: FD-277 |
| 85 | All as per Srl. Item No. 16.00 here-in-before but Table centre DRG NO: FD-274/235 |
| 86 | All as per Srl. Item No. 16.00 here-in-before but Teapoy DRG NO: FD-278/232 |
| 87 | All as per Srl. Item No. 16.00 here-in-before but Table Dressing Gents DRG NO: FD-31(M) / 230 |
| 88 | All as per Srl. Item No. 16.00 here-in-before but Hat stand DRG NO: FD-233 / 206 |
| 89 | All as per Srl. Item No. 16.00 here-in-before but Table dressing ladies DRG NO: FD-251 / 32 |
| 90 | All as per Srl. Item No. 16.00 here-in-before but Table writing DRG NO: FD-275/ 249 |
| 91 | All as per Srl. Item No. 16.00 here-in-before but Sofa Chair DRG NO: FD-258 / 281 |
| 92 | All as per Srl. Item No. 16.00 here-in-before but Sofa set 3 seater DRG NO: FD-258 / 281 |
| 93 | CHAIR VERANDAH: FD-359 |
| 94 | M & L to removing the old cane of Chair Verandah and recanning with new half round 4/5mm wide plastic cane in oval shape with mat pattern .(Plastic cane shall be of white colour of Make: as per key specification) complete all as specified and as directed by the Engineer-in-Charge. |
| 95 | M & L painting to frame of chair verandah with white synthetic enamel paint including preparation of surface. (after removing of the cane) and provide 04 Nos hard Rubber shoes of black colour to legs of chair Verandah as specified and directed by Engr-in-Charge. |
| 96 | M & L for electric welding to broken old frame of chair verandah including preparation of surface and removing the unwanted welding spot all as directed by Engineer-in-Charge. |
| 97 | Almirah large/medium steel (FD-1031, 1032, 1033 and 1034) |
| 98 | M & L for removing unsv Leg by Supply and fix new leg of almirah large/medium steel made of 1mm thick M S sheet size all as per drg and duly spray painted with synthetic enamel paint two coats over a coat of red oxide primer.(colour of shade as per directed by Engr-in-charge) |
| 99 | M & L for removing unsv lock by Supply and fix new lock brass 4 lever of approved best quality with duplicate key for almirah Large/medium steel all as directed by Engr-in-Charge. (Make - as per sample approval) |
| 100 | M & L for removing unsv handle by Supply and fix new handle mild steel CP 125mm long S Type as per sample for almirah large/medium steel all as directed and shown on drg. |
| 101 | M & L for removing unsv Shelf by Supply and fix new shelf of almirah large/medium steel, made of M.S sheet 1mm thick bend to shape and size as shown on drg. |
| 102 | M & L for removing unsv locking device by Supply and fix new locking device and cover of device as per existing for almirah medium steel including re-fixing of disconnect shelf with stay hook/revetting all as directed by Engr-in-Charge. (FD-1032). |
| 103 | All as per Srl. Item No. 13.05 here-in-before but almirah large Steel. |
| 104 | M & L for removing unsv door shutter by Supply and fix new door shutter of almirah medium steel, made of M.S sheet 1mm thick bend to shape and size as shown on drg. |
| 105 | All as per Srl. Item No. 13.07 here-in-before but almirah large Steel. |
| 106 | M&L for welding in reapairs exceeding 2.5 but not exceeding 5cm length and thickness of metal to be welded not exceeding 6mm all as directed. |
| 107 | TABLE OFFICE CLERK STEEL: DRG NO: FD-84 / 1004 |
| 108 | M & L for removing unserviceable Top by Supply and fix new top of table office clerk steel with top made of 18/19mm thick pre-laminated particle board exterior grade with 4mm thick teak wood beading alround of size 1220x730mm all as shown on drg and directed by Engr-in-Charge. (Make of pre-laminated particle board:- As per particular specification) |
| 109 | M & L for removing unserviceable drawers by Supply and fix new drawer of table office officer/clerks steel shape made out of 1mm thick MS sheet size and shape all as specified and shown on drg. |
| 110 | M & L for removing unserviceable lock by Supply and fix new brass lock 4 lever of table office officers/ clerks steel of approved best quality with duplicate keys all as specified. (Make As per particular specification) |
| 111 | Preparing old painted steel surfaces (internal & external) by sand paper, cleaning, including denting patches by filling putty (metal paste) and painting one coat to uniform finish with synthetic enamel paint , shade as directed by GE/Engr-in-charge for the following articles:- |
| 112 | M & L for Spray painting to Almirah Large Steel with synthetic enamel Olive Green spray paint internaly and externaly, after removing of loose paint and providing putty after removing denting and making good of bends surfaces if any and refixing of loose shelves with MS stay hook as required, complete all as specified and directed by Engineer-in-Charge. (FD-1031). |
| 113 | All as per Srl item No. 15.01 here-in-before but spray painting with synthetic enamel Olive Green paint externally portion only to almirah Large steel. (FD-1031) |
| 114 | M & L Spray painting to table office clerk steel except top with synthetic enamel Olive Green paint internaly and externaly, after removing denting & dust, preparation of surfaces by providing putty and red oxide primer where required complete and providing 04 Nos rubber shoes ot table all as specified and directed by Engineer-in-Charge. (FD-84,381 & 1004) |
| 115 | All as per Srl item 15.03 here-in-before but table office officer. (FD-1002 & 1003) |
| 116 | REPAIRS TO CHAIR REVOLVING/ COMPUTER : FD/E6/MAP/01 |
| 117 | M & L for removing old unsv Gas Lifter/hydraulic assembly by S & F new gas lift/hydraulic assy as per sample inculding tighting the frame work etc. |
| 118 | M & L for removing old unsv Poly Urathene Armrest by S & F new arm rest of superior quality as per sample including nut and bolts. |
| 119 | M & L for removing unsv pedestal assy by S & F new pedestal assy including tighting the frame work. |
| 120 | M & L for removing unsv castor wheel by S & F new castor wheel of superior quality including tighting the frame work. |
| 121 | M&L for removing old seat & back cover cloth and supply and fix new tapestry cloth not less then Rs 220/- per mtr for seat and back of superior quality as specified and directed by Engr-in-charge |
| 122 | Repairs to Bed Hard Steel MAP : FD/MAP/08(R) |
| 123 | M & L for removing unserviceable Head board by Supply and fix new Head board made out of 19mm thick prelaminated particle board exterior grade with PVC beading all round all as directed by Engr-in-Charge. (Make of As per particular specification) |
| 124 | All as per ser No 5.01 here-in-before but foot board of Bed Hard Steel. |
| 125 | M & L for removing unserviceable ply by Supply and fix new plywood of size 1980x900x12mm thick BWR grade with steel Nut bolt of Bed Hard Steel as per IS:303 all as directed by Engr-in-Charge.(Make of plywood- (As per particular specification) |
| 126 | M & L for tightening to Bed Hard Steel with electric welding complete including preparation of surface and removing the unwanted welding spot all as directed by Engineer-in-Charge. |
| 127 | Replacement of old unserviceable PVC/Rubber Shoes of Bed Hard Steel (FD/MAP/8(R) and S&F new PVC/Rubbered shoe of best quality (as per sample available at BSO yard ) of approved, complete all as specified and directed. |
| 128 | Material and Labour for painting to frame of Bed Hard Steel with synthetic enamel black paint including preparation of surface with rubbing with emery paper to bed hard steel all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender