Tender For Addn/Altn To Officers And Toilets At 5Th Floor Right Wing Of Bldg No P-1 (Old Comd Bldg) Inside Vijay Durg Under Ge(Vd) Kolkata
Tender Value
41.50 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
1 days left
EMD
83000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/Altn To Officers And Toilets At 5Th Floor Right Wing Of Bldg No P-1 (Old Comd Bldg) Inside Vijay Durg Under Ge(Vd) Kolkata
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Sep-2026 | BOQ CORRIGENDUM | BOQ | 28-Sep-2026 |
| 2 | 17-Sep-2026 | CORRIGENDUM | Date | 28-Sep-2026 |
| 3 | 28-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | B/R PORTION M&L for 8 to 10 mm thick seamless waterproof and termite proof WPC louvers wall panels fixed with probond adhesive and screwed to the wall using clips with corner beadings etc., complete all as per manufacturer's instructions, all as specified and directed. |
| 2 | M&L 4mm thick water proof and termite proof charcoal wall panel pasted on 5.5 mm thick WPC white board with adhesive screwed to the wall etc complete, all as per manufacturer instruction, all as specified and directed. |
| 3 | Dismantling of Aluminium framework in partition, door or in any position with all connection items all as specified and directed. |
| 4 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 5 | Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed. |
| 6 | Demolition of Brick work / stone masonry built in cement mortar and removing the debris from MD land complete all as specified and directed. |
| 7 | M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in1:4 cement mortar complete all as specified and directed. |
| 8 | M &L Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified. |
| 9 | M&L rendering 15 mm thick on fair faces of brick work/concrete surfaces in CM 1: 6 finished fair & even & smooth without using extra cement, all as specified and directed |
| 10 | M&L rendering 10 mm thick on fair faces of brick work/concrete surfaces in CM 1: 6 finished fair & even & smooth without using extra cement, all as specified and directed. |
| 11 | M&L for preparation of new surfaces and applying two coats of OBD over alkali resistant primer after applying 2 mm thick wall care putty on walls, all as specified and directed |
| 12 | Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) area exceeding 1.5 sqm and not exceeding 4 sqm each and removing from the site complete all as specified and directed. |
| 13 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 14 | M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:4 all as specified and directed. |
| 15 | M&L Rendering 10mm thick in cement mortar 1:3 on vertical surfaces(concrete/brick wall) for backing coat complete all as specified and directed. |
| 16 | M&L Vitrified ceramic tiles light shade/double charged/ultra charged of 9 or 10 mm thick (Square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.92 sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 17 | All as per item no 14, here-in-before but as in walls/skirting on vertical surfaces. |
| 18 | S&F Non - skid Ceramic color tiles 7 to 8 mm thick area of each tile exceeding 0.38 sqm but not exceeding 1.28 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement complete including 15 mm thick screed bed of cement mortar 1:6 complete all as specified and directed. |
| 19 | S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides if one face is covered with deco rative face veneer with lipping/frame to match. All as specified anf directed. |
| 20 | Providing and fixing factory made uPVC white color Sliding window .Two track two sash. Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.] (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose). |
| 21 | Supplying and installing uPVC- Sliding windows/doors made out of lead free green profiles having a worldwide presence with a GREENLINE mark having three tracks and three sashes (shutters) with frame dimension of 104mm x 49mm and sash dimension of 61mm x 47mm x 37mm each with corners fusion welded, fully reinforced with Galvanized steel of 1.2 mm. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The profile manufacturer should be a certified member of IGBC and should have extrusion facility in India and the windows to be assembled and installed by an authorised fabrication partner . The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets,bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside and Outside. [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.] (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose). |
| 22 | M&L 10 to 12 mm thick Toughned glass(Plain/frosted as required) as in hinged doors, partitions, windows, automatic doors and similar work including cutting to shape, drilling holes required, CP handles & lock, complete all as specified |
| 23 | M&L 5 mm thick Toughned glass(frosted) as in hinged doors, partitions, windows, automatic doors and similar work including cutting to shape, drilling holes required, complete all as specified. |
| 24 | Supply and fixed double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheed foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed. |
| 25 | S&F Aluminium hydraulic door closer, designation No. 3, universal type,comply with IS 3564-1995 suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg.Closers shall be universal type suitable for both anticlockwise and clockwise doors, without any change in parts of the closers as directed and specified. |
| 26 | S&F Butt Hinges medium weight cold rolled stainless steel 100mm long complete all as specified |
| 27 | M&L for post construction Anti termite treatment At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same. all as specified and directed. |
| 28 | M&L for post construction Anti termite treatment Of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors. all as specified and directed. |
| 29 | Supply and fixing in repairs 150mm extruded brass handles, cast type, polished bright complete all as specified and as directed. |
| 30 | S&F 6 lever Mortice lock Double throw having 5 inch as length of handle and lock having Antique brass finish of make Godrej Model No EM 02 mortice lock handle set 7696. all as specified and directed. |
| 31 | S&F 4mm thick Veneered decorative ply wood(having 3 nos of ply), grade I (with BWR resin)decorative veneers on one face. All as specified and directed. |
| 32 | M&L for applying two or more coats of PU wood polish on new surfaces that highlight the natural grain of wood and providing high resistance to scratches, stains, heat and moisture includiung preparation of surfaces and bring to an finishing surface. All as specified and directed. |
| 33 | S&F Floor door stopper of Brass alloy body and tongue(having 140 mm overall length of cover plate) , anodised, with hard drawn steel spring, fixed in floor |
| 34 | S&F 200 mm Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed. |
| 35 | S&F 300mm brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts polished, complete all as specified and directed. |
| 36 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, wooden flooring of any thickness including cover fillets complete all as specified. |
| 37 | S&F Gl frame work for seamless ceiling (Gypsum Board 12mm thick in ceiling fixed with screw and POP putty of 1 mm thickness over surfaces) comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. including 6mm dia Gl (upto 1200mm length) hangers adjusting level fixed to roof slabs by means of ceiling cleats made out of Gl flat 40x3 mm size 60 mm long and expansion hold fasteners 12 5mm dia 40 mm long complete all as specified. |
| 38 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.). |
| 39 | M&L for POP ceiling cornice of 4-6 inch thickness with approved design all as directed and specified. |
| 40 | M&L for Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth.all as directed and specified. |
| 41 | S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing. |
| 42 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. |
| 43 | S&F WPC Decorative Beading of size 25mm x 5mm with wood moulding design. All as specified and directed. |
| 44 | M&L forpreparation of surfaces of wall and applying two or more coats of metallic texture paint in required shade/design. All as specified and directed. |
| 45 | M&L for 10 cm thick Cement concrete of TYPE E2 (1:5:10) of aggregate size 40 mm in foundations, filling and mass concrete after applying the bitumen primer for water proofing of floor with providing a bend if required. All as specified and directed. |
| 46 | Taking up or down 15 mm bore steel tubing and including cleaning for refixing or removal to store complete all as directed. |
| 47 | Supplying and laying of 15 mm bore Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2fixed complete to walls, ceilings or in floors etc. all as specified and directed. |
| 48 | M&L 25 mm thick cement concrete 1:2:4 , type B0 using 12.5 mm graded aggregate as in sub base for floor. |
| 49 | Supplying and fitting Ball valve for 15 mm bore LDPE pipe pipe all as specified and directed. |
| 50 | S&F Rimless wall hung EWC(Carnival Black) with seat cover of make CeraFinish - Matte outside & Glossy inside Duroplast soft close seat cover, Hinges, Fixing Accessories, , Size: 510 x 365 x 380 mm, P Trap -180 mm. all as specified and directed.(Make :- Cera Cat. No. S1044144MB or Jaguar ) |
| 51 | S&F Concealed Cistern Set with Full Frame of make Cera Cat. No. B1110111 (without knob) suitable for wall hung EWC of make Cera. All as specified and directed. |
| 52 | S&F concealed cistern knob (H Knob - Matte Black) of Make Cera Cat No:- B1120122MB or equivalent as directed by EIC.all as specified and directed. |
| 53 | Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) not exceeding 1.5 sqm each and removing from the site complete all as specified and directed. |
| 54 | Supplying and laying of 50 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed. |
| 55 | S&F 110 mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls all as directed and specified. |
| 56 | S&F 110 mm bore PVC (SWR) Bends of any radius as required. All as specifed and directed. |
| 57 | S&F 110 mm bore PVC (SWR) Bends with access door of any radius as required. All as specifed and directed. |
| 58 | S&F 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal as required. |
| 59 | S&F PVC (SWR) vent cowl of 110 mm bore. All as specifed and directed. |
| 60 | S&F 110 mm bore PVC (SWR) 'P’ trap as specified and directed. |
| 61 | S&F 110mm PVC (SWR) WC connector with lip ring all as directed and specified. |
| 62 | S&F PVC (SWR) multi floor trap with grating (of 75 mm bore) including jointing with solvent cement all as specified. |
| 63 | S&F PVC (SWR) reducers for 110 mm SWR pipe from 180 mm P trap all as directed and specified. |
| 64 | M&L for 18-20 mm thick Granite slab of approved quality (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.as specified. |
| 65 | M&L for Providing edge moulding to 18-20mm thickness of granite stone any description of counters vanities etc. including machine polishing to edge to give high gloss finish etc. completeall as specified. |
| 66 | S&F in repair vitreous china Thin rim table top Wash basin Finish - Matte outside & Glossy inside 450 x 400 x 160 mm of including all accessories complete all as specified Make Cera cat no Cat. No. S2020101MB or specified in tender. |
| 67 | S&F CP waste coupling 32 mm size half thread with 130 mm height to be fixed in Urinals and Basins all as directed and specified. (MAKE : Cera, Cat no. F8050102/ Jaguar or specified in tender. |
| 68 | S&F chromium plated bottle trap 32 mm size with 300mm and 190 mmlong wall connectionpipes and wall Flange all as directed. |
| 69 | S&F PVC connection 450 mm long of PTMT 15 mm bore complete all as specified and directed. |
| 70 | S&F Opal Prime Tall Boy Sensor Faucet for Wash Basin with Pre-mixed Water Supply Kit (Battery Operated) (MAKE : jaguar, Cat no.SNR-15017PMPK or specified in tender. |
| 71 | S&F in repair Dribble - Two Function Health Faucet Matte Black all as directed. (MAKE : CERA, Cat no.F8035101 or specified in tender. |
| 72 | S&F Chromium plated health fauset (hand shower) with 8 mm dia, 1.2 mm long flexible tube & wall hook with NRV (back flow preventer) all as directed. (MAKE : JAGUAR, Cat no. ALD-577/ PARRYWARE or specified in tender. |
| 73 | S&F soap dispenser with glass bottle all as specified and directed. (MAKE : JAGUAR, Cat no. AKP-35735P/ PARRYWARE or specified in tender. |
| 74 | S&F Towel Rack 600mm Long Without Lower Hangers but with 3 hooks, Stainless Steel as specified and directed. (MAKE : JAGUAR, Cat no. ACN-1181FHS/ PARRYWARE or specified in tender. |
| 75 | S&F 6 mm led mirror of area exc .5 sqm but n exc 2.5 sqm(including bracket light and sensor adaptor) of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers as specified. |
| 76 | M&L for preparation of surfaces and pasting of wall paper of any design/pattern/shade complete all as specified and directed. |
| 77 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions)frames with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 78 | S&F 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed. |
| 79 | M&L solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, all as specified and directed. |
| 80 | Supply and fixing in repairs 12 mm thick plywood, grade BWR. type BB. fixed to existing wooden surfaces with nails, complete all as specified and as directed. |
| 81 | Supply and fixing 19mm thick plywood, grade BWR, type BB, fixed to existing wooden surfaces with nails complete all as specified and as directed. |
| 82 | M&L 0.9 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified. |
| 83 | M&L for preparation and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 2004, alkali & fungal resistance dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 liter/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over 2 mm thick exterior wall care putty of new surfaces, all as specified and directed. |
| 84 | M&L for preparation of old decorated plastered surfaces or un-plastered ceiling surfaces and applying one coat of plastic emulsion paint complete all as specified and directed. |
| 85 | M & L for preparation of surfaces of walls and applying two coat of plastic emulsion paint over a coat of alkali resistant primer and 1 mm thick wall care putty after complete removal of existing treatment, all as specified and directed |
| 86 | (E/M PORTION)Taking down copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants , regulators, sockets etc excluding light fitting for taking credit removing from site and making good disturbed surface of walls, floors etc complete all as specified and directed. Please Enable Macros to View BoQ information |
| 87 | (E/M PORTION)Taking down copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants , regulators, sockets etc excluding light fitting for taking credit removing from site and making good disturbed surface of walls, floors etc complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 28, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Sep 28, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 05, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender