Tender For Repair To Water Proofing Treatment, Gi/Galvalume Sheets, Service Tanks Along With Associated B/R Works For Outer Pockets At Jaffarpore, Los Dumdum And Kpa Under Ge (Af) Barrackpore.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Sep 2026
6 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Water Proofing Treatment, Gi/Galvalume Sheets, Service Tanks Along With Associated B/R Works For Outer Pockets At Jaffarpore, Los Dumdum And Kpa Under Ge (Af) Barrackpore.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc. and removing debris from site complete all as specified and directed. |
| 2 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets any thickness, including cover fillet / snap grid complete all as specified and directed. |
| 3 | Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars etc. including removing of unserviciable material from site complete all as specified and directed. |
| 4 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided including removing of rubish from site complete all as specified and directed. |
| 5 | Dismantling wrought iron or mild steel works of any description not otherwise provided for complete all as specified and directed. |
| 6 | Dismanting of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 7 | Supply, hoist and fix 500 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old unseviciable existing tank and removing from site complete all as specified and directed. |
| 8 | Supply, hoist and fix 1000 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old unseviceable existing tank complete all as specified and directed. |
| 9 | Supply and fix in repairs 20 mm bore GI tubes (medium grade) with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 10 | Supply and fix in repairs15 mm bore GI tubes (medium grade) with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.. |
| 11 | Material and labour for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed. |
| 12 | Material and labour for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed. |
| 13 | Material and labour for 5mm thick rendering on concrete surfaces in cement mortar (1:3) and finish the surfaces even and smooth without using extra cement as in ceiling complete all as specified and directed. |
| 14 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 15 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of acrylic washable distemper over a coat of alkali resistance primer complete all as specified and directed. |
| 16 | Material and labour for preparation of new plastered surfaces of wall and applying three coat of white wash complete all as specified and directed. |
| 17 | Material and labour for PCC (1:2:4), type B1, (using 20mm graded stone aggregate), as in coping, bed plate, kerbs, water troughs and like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork complete all as specified and as directed |
| 18 | Supply and fix in repair 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 19 | Supply and fix in repair 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 20 | Supply and fix in repair 110mm bore PVC (SWR) juction single (single T) equal or unequal with access door complete all as speified and directed |
| 21 | Supply and fix in repair 110 mm bore PVC (SWR) bends with access door any radius complete all as speified and directed. |
| 22 | Supply and fix in repair 75mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 23 | Supply and fix 75mm bore PVC (SWR) juction single (single T) equal or unequal with access door complete all as speified and directed |
| 24 | Supply and fix in repair 20mm dia ball valve high pressure high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gm) complete all as specified and directed |
| 25 | Supply and fix in repair 20mm bore gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 26 | Disconnecting existing tanks of capacity exc 250 ltrs and n. exc 500 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed |
| 27 | Disconnecting existing tanks of capacity exc 500 ltrs and n. exc 1000 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed |
| 28 | Material and labour for plastic polycarbonate spikes cover for water tank fixed with all weather neutral cure silicon sealant all as specified and directed. |
| 29 | Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:4) complete all as specified and directed. |
| 30 | All as per item No 29.00 above but except bricks and -ditto-.Note:- Serviciable bricks obtained from item No 29.00 shall be reused under this item. |
| 31 | Materials and labour for half brick thick brick work with sub class `B` bricks, old size, straight or curved on plan to any radius built in cement mortar (1:4) complete all as specified and directed. |
| 32 | Supply and fix mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders, framed balusters, walk ways; railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 33 | Material and labour for structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes complete all as specified and directed. |
| 34 | Supply and fix 0.50mm thick pre- painted galvalume aluminum zinc coating GI based corrugated / semi corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 35 | Supply and fix 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and directed. |
| 36 | Material and labour for repairs to uneven surface of concrete and reinforcement from drop of fins,facias,chajjas using necessary scaffolding and making good disturbed portion with rendering cement plaster, 10 mm thick in cement mortar 1:3, finished even and smooth without using extra cement complete all as specified and directed. |
| 37 | Supply and fix false ceiling with powder coated exposed GI m grid suspension system (E-grid T-2430 or equivalent load carrying capacity- 12.50 Kg/sqm with mid span deflection n. exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long of size- 24x38mmx0.25mm thick, cross tee of section size- 24x27mmx0.25mm thick 1200mm/600mm long and wall angle of section size 22x22mmx0.4mm thick. The wall angle shall be fixed on PVC dash fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The main runners to be placed @ 1200mm, The cross tee 1200mm will be inserted in pre-cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmx600mm. Additional cross tee of 600mm shall be placed perpendicular to the cross tee1200mm long to finally form a grid of 600mm x 600mm shall be supported by 6 mm dia G.I. wire from purlins/soffits. 4mm thick high pressure steam cured non Asbestos fibre cement designer ceiling board (density> 1200kg/cum, modules of rupture (M.O.R)-15.85 Mpa, thermal conductivity (k)-0.0872 W/mk) of size 595mm x 595mm, confirming to IS 14862 & type B catagory III of ISO 8336-1993, (Reaction of fire-A2 -s1-d0) tested as per EN 13501 Part-I & BS-476 part- 4, 5, 6 & 7, should be placed in the grid module to form a false ceiling complete all as specified and directed.Make: Armstrong/ Saint Gobain/ Lafarge/ Everest. Please Enable Macros to View BoQ information |
| 38 | Supply and fix false ceiling with powder coated exposed GI m grid suspension system (E-grid T-2430 or equivalent load carrying capacity- 12.50 Kg/sqm with mid span deflection n. exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long of size- 24x38mmx0.25mm thick, cross tee of section size- 24x27mmx0.25mm thick 1200mm/600mm long and wall angle of section size 22x22mmx0.4mm thick. The wall angle shall be fixed on PVC dash fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The main runners to be placed @ 1200mm, The cross tee 1200mm will be inserted in pre-cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmx600mm. Additional cross tee of 600mm shall be placed perpendicular to the cross tee1200mm long to finally form a grid of 600mm x 600mm shall be supported by 6 mm dia G.I. wire from purlins/soffits. 4mm thick high pressure steam cured non Asbestos fibre cement designer ceiling board (density> 1200kg/cum, modules of rupture (M.O.R)-15.85 Mpa, thermal conductivity (k)-0.0872 W/mk) of size 595mm x 595mm, confirming to IS 14862 & type B catagory III of ISO 8336-1993, (Reaction of fire-A2 -s1-d0) tested as per EN 13501 Part-I & BS-476 part- 4, 5, 6 & 7, should be placed in the grid module to form a false ceiling complete all as specified and directed.Make: Armstrong/ Saint Gobain/ Lafarge/ Everest. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender