Tender For Provn Of Certain Works Services For Reverting Of Back Feed Configuration In Mafi Power Ring Phase-I At Af Stn Bareilly.
Tender Value
61.20 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
3 days left
EMD
1.16 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Certain Works Services For Reverting Of Back Feed Configuration In Mafi Power Ring Phase-I At Af Stn Bareilly.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Supply, Installation, Testing, Commissioning for Automation system for sequencial Monitoring and controling VCB breaker consisting the following items complete all as specified and directed :- (a) PLC Panel at PS-I, (b) Remote IO Panel at PS 2, (c) Fiber cable laying (Approx 2.5Km) & Temination, (d) Control cable laying and Termination, (e) Wiring modification in HT/LT Panels, (f) Commissioning of system |
| 2 | PLC panel items :-(i) Genset LMS PLC controller. Make - Woodward/DEIF/Danfoss/ABB, Qty - 01 No (ii) HMI - Make - Hymaa/ Schneider Electric/ABB/Siemens , Qty - 01 No (iii) SMPS - Make - MW/Omron/Schneider Electric/ABB/Siemens, Qty - 02 Nos (iv) Orring Diode - Make - Shavison/Phoenix contact/Puls/ABB/Schneider , Qty - 02 Nos (v) DC to DC convertor, Make - Shavison/Phoenix contact/Puls/ABB/Schneider, Qty - 02 Nos (vi) Ethernet switch 4Tx+1FO, Make - Phoenix/Siemens/Schnieder/Omron , Qty - 01 No(vii) LIU unit, Make - Phoenix/Siemens/Schnieder/Omron, Qty - 01 No (viii) voltage monitoring Relay, Make - L&T/ABB/Schnieder , Qty - 02 Nos (ix) UPS 1KVA, Make - Microtek/Omron/V Guard/Luminous, Qty - 01 No (x) MCB DP 32A/10A/6A, Make - L&T/Havelles/Legrand, (xi) On/Off Indicating Light RG, Make - L&T/ABB/Legrand (xii) Fan with filter , Make - Bajaj/Orient/Havelles, Qty - 02 Nos (xiii) Misc items, Qty - 01 No (xiv) Switch socket , Make - Bajaj/Anchor/crompton, Qty - 01 No (xv) Panel Light , Make - Havelles/Bajaj/Crompton, Qty - 01 No (xvi) Duly wired control panel , Make - Hymaa/ABB/Schnider, Qty - 01 No |
| 3 | Remote IO Panel items :- (1) RIO Module , Make - Woodward/DEIF/Danfoss/ABB , Qty - 01 No (2) HMI , Make -- Hymaa// Schneider Electric/ABB/Siemens , Qty- 01 No (3) SMPS, Make - MW/Omron//Schneider Electric/ABB/Siemens, Qty - 02 Nos (4) Orring Doide , Make - Shavison/Phoenix contact/Puls/ABB/Schneider, Qty - 02 Nos (5) Ethernet switch 4Tx+1FO, Make - Phoenix/Siemens/Schnieder/Omron , Qty - 01 No (6) LIU unit , Make - Phoenix/Siemens/Schnieder/Omron, Qty - 01 No (7) UPS 1 KVA , Make - Microtek/Omron/V Guard/Luminous, Qty - 01 No (8) MCB DP 32A/10A/6 A, Make - L&T/Havelles/Legrand, (9) On/Off indicating Light RG , Make - L&T/ABB/Legrand (10) Fan with filter, Make - Bajaj/Orient/Havelles,, Qty - 02 No (11) Misc Items, Qty - 01 No (12) Switch socket, Make - /Bajaj/Anchor/Crompton, Qty - 01 No (13) Panel light, Make - Havelles/Bajaj/Crompton , Qty - 01 No (14) Duly wired control panel, Make -Hymaa/ABB/Schnider , Qty - 01 No |
| 4 | Features of Proposed System :- •AMF Operation of DG Sets at PS1 • Synchronising & Load Sharing of DG Set 1& 2 at PS1 • Load Management of DG Sets • Breaker Control on LT Side at PS1 • VCB Control & Monitoring on HT Side at PS1 • High Speed Optical Fibre Communication between PS1 & PS2 • VCB Control & Monitoring on HT Side at PS2 • AMF Control of DG Set at PS2 • Provision for power transfer with Automation from PS1 to PS2 • Auto & Manual Interlocking for Safety in operation |
| 5 | Scope of Supply:1. SITC of PLC Panel with HMI at PS1 2. SITC of Control cables between PLC Panel & LT Panel (PS1) 3. SITC of Control cables between PLC Panel & HT Panel (PS1) 4. Supply & Laying of Fibre Optic cable between PS1 & PS2 5. Supply of Termination accessories for Fibre Cable Termination 6. Termination of Fibre cable at PS1 & PS2 7. SITC of Remote IO Panel with HMI at PS2 8. SITC of Control cables between PLC Panel & AMF Panel (PS2) 9. SITC of Control cables between PLC Panel & HT Panel (PS2) 10. Health checkup of VCB/ACB 11. Wiring Modification in HT & LT Panel at PS1 12. Interlocking arrangement in HT & LT Panel at PS1 13. Wiring Modification in HT & AMF Panel at PS2 14. Interlocking arrangement in HT & AMF Panel at PS2 15. Development of PLC Software & Graphic designing of HMI 16. Preparation of Cable Schedule 17. Designing of Control Schematic 18. Commissioning & Trial of Complete System 19. Handing over & Training |
| 6 | M&L Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and machine including HDPE pipe of 100 mm necessary dia suitable for 0.4 mpa working pressure complete all as specified and directed. |
| 7 | Supply, laying ,Testing and Commissioning of 50 mm dia trenches for galvanised steel tubes light grade including all fittings complete all as specified and directed. |
| 8 | Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc. 10 sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 9 | Returning filling in soil and including spreading leveling watering and well ramming in layers n exc 25 cm thick complete all as specified and directed. |
| 10 | Removing excavated soil to a distance n exc 50 mtr and depositing where directed at a level n exc 1.5m above the starting points complete all as specified and directed. |
| 11 | M&L for precast PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) route indicator suitable for mounting on route of Fiber cable of size 25cm (width) x10cm (depth) x 60 cm overall height including 4mm gauge iron bar , embedded to the depth not less than 20 cm below ground level, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 06, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender