Power Government Departments Closing in 4 days TDR #57344278

Tender For Construction Of 33 Kv Independent Feeder From 220 Kv Cant Substation To Dr. Rajendra Prasad National Law University Near Iiit Jhawla, Prayagraj Under Eudd-Bamrauli On Semi Turn Key Basis.

Issued by Government Departments · Prayagraj, Uttar Pradesh
Tender Value
2.44 Crore
Estimated cost
Bid Submission
10 Sep 2026
4 days left
EMD
2.40 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Prayagraj → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of 33 Kv Independent Feeder From 220 Kv Cant Substation To Dr. Rajendra Prasad National Law University Near Iiit Jhawla, Prayagraj Under Eudd-Bamrauli On Semi Turn Key Basis.

BOQ

Name of Work:- Construction of 33 KV Independent Feeder from 220 KV Cant Substation to Dr. Rajendra Prasad National Law University Near IIIT Jhawla, Prayagraj Under EUDD-Bamrauli on Semi Turn Key Basis.
Sl. No. Item Description
1SUPPLY OF MATERIALS
2Structure for 33 KV Bay end terminal for Connecting Cable with Bay
33x300 Sqmm Cable Jointing Outdoor
43x300 Sqmm Cable Jointing Straight Through
5Corss Arm MS Angal 65x65x6 MM
6Top Channel 125x65 MM
7Corss Arm holding Clamp
8Earth wire Clamp with Nut & Bolt
9Stone Pad 300x300x75
10Number Plate with Clamp and Nut Bolt
11Danger Board with Clamp and Nut Bolt
12Barbed Wire GI
13Bolt nut and Washer
14Al. Binding wire
15Al. Paint
16Red Oxide Paint
17Earthing of Pole
18Extra Cost of Stay at Angle point
19HDPE Pipe 160 MM
20GI Pipe 6\\" Dia
21Indoor Type Cable termination kit for 33 KV 3x300 Sqmm Cable
22Heat Shrinkable Bus bar insulating Tap
23160 MM OD PN-4 PE-80 Grade UV Stablized HDPE Pipe
24RIGID PVC Pipes 160x6MM x 2.5 Mtr.
25Hot Dip Galvanised Earthing Pipe
26Hot Dip Galvanised Earthing Strip off Size 50x6 MM
27Epoxy Compound
28Hot Dip Galvanised Cable Support Clamp for 120 Sqmm To 300 Sqmm 3 Core Cable
296\\" Dia RCC Half Round Muffs For HT Cable
30Strucure of Isolator with Plinth and Foundation
31Description of Works
32Cartage of 11 Mtr STP from Store to dump store and dump store to work Site Including loading and unloading charges.
33Cartage of 33 KV, 3x300 sq mm XLPE cable from Store to dump store and dump store to work Site Including loading and unloading charges.
34Cartage of 33KV RMU from Store to dump store and dump store to work Site Including loading and unloading charges.
35Cartage of line isolator,pin insulator,PPMC,other Materials from Store to dump store/work Site Including loading and unloading
36Eerection of 11 mtr double pole support with fixing of necessary clamps, Cross Brecing angle and other accessories like channel, insulator etc.(As per RESSPO) All material provied by contractor except 11 M Long St pole and supplied material.
37Grouting and muffing of ST Pole, grouting in ratio 1:4:8, cement, stone grit & coarse sand, plinthing of support of size 0.4x0.45x0.3 Mtr.with cement sand& bricks blast in ratio 1:4:8 and 12 mm thick plastring around the plingth in ration 1:2:4 with 12 mm thickness curing of plinth should be done properly .(as per RESSPO) All material provied by contractor except supplied material.
38Earthing of support complete with the help of M.S. rod 20 mm dia and 2.54 mtr. long, fastening of G.I. wire/G.I.Strip 50x6 sqmm with clamps/X-arm/support to M.S. earth rod. As per Resspo and Electrical safety rules.(All Material Provided by Contractor except supplied material)
39Fixing & grouting of stay rod with cement, sand and bricks ballast in ratio 1:4:8 and fastening the stay wire with pole and stay rod nuzzling (All require materials will be arranged by the contractor except supplied material)
40Laying of 33 KV 3x300 sq mm XLPE cable by machine drilling method with HDPE Pipe. The cable shall be laid at the depth of 1200 mm from the surface of road .The cable shall be laid strictly in compliance to RESSPO Norms. (HDPE Pipe as per Sample specification of department) . Before cable laying route has to be scanned by high precision utility cable and pipe locator machine to avoid any damage to any utility.All material provied by Contractor except 33 KV Cable, HDPE PIPE and supplied material.
41Fixing of jointing kit Heat Shrink cable type end Terminations suitable for 33 KV, 3x300 sq mm XLPE cable. As per Resspo and Electrical Safety rule) including jointing kit. (All material porvided by contractor except supplied material)
42Outdoor/indoor jointing kit
43Straight through jointing kit
44Hoisting of 33 KV 3x300 sq mm XLPE cable providing GI pipe of size 6” dia 3 M long on double pole including its jumpering, complete with Channel and clamps, nut & bolts. As per Resspo and Electrical safety rules. (All material porvided by contractor except cable and supplied material)
45Construction of RMU foundation as Sample provided by Executive Engineer and installation of RMU with all Accessories All require material provided by contractor. (33 KV RING MAIN UNIT (RMU) 4 way RMU 33KV 1000A (2NOS INCOMING WITH ISOLATOR AND 2 OUTGOING WITH VCB)
46Istallation of 33KV 1000A RMU on constructed foundation and connect 33KV cable incomming and outgoing all material given by contractor except 33KV RMU and other necessary material.
47Earthing of 33 KV RMU complete as per schedule with 50x6 mm.G.I. Strip and Hot Dip Galvanised Earthing Pipe 60fit long All earthing material shall be provided by the Contractor except supplied material.
48constrction of Structure for 33 KV Bay end terminal for Connecting Cable with Bay and isolator as per requirement of site as per instruction/guidence of JE/SDO/EE. All material given by contractor except supplied material.
49Erection of complete structure for 33 Kv Isolator in switch yard as per RESPO drawing. Work also includes construction of gantry plinth of size 1.0x0.45x0.45 cum with cement,coarse sand and ballast in ratio 1:3:6 and plastaring of plinth with cement & sand in ratio 1:4 including digging of pits & backfilling. All concreting material like cement, ballast, sand labour & T&P etc.shall be provided by the contractor except supplied material.
50Earthing of 33 KV Line Isolator complete as per schedule with 50x6 mm.G.I. Strip and Hot Dip Galvanised Earthing Pipe 60fit long All earthing material shall be provided by the Contractor except supplied material.
51Cutting of tree branches all along the route of 33 KV line, which may obstruct the line.
52Small branches.
53Big Branches.
54Painting of 11 ST Pole with Calmp and Channel 1 coat Red Oxide and 2 coat Alluminium Paint All auxiliry material should be provided by contractor except supplied material.
55Painting of all structure and equipment inside the whole switch yard with two coats of red oxide primer and thereafter two coats of aluminium paint, giving silver white finish, painting is to be done after proper cleaning of the structures. paint, primer, thinner etc. required all material shall be provided by the contractor except supplied material.
56Instalation of Sign board(Cable route marker) at site ofter compelted of work Sign board size 2x2 feet with stand writing material and sign bord design will be provided by deportment and sign board, stand and grouting materials provided by contractor. Sing board eill be provided by conrtacror as per sample provided by ddepartment. Shine board (Cable route marker ) install at every 200mtr.
57Instalation of Sign board at site ofter compelted of work Sign board size 3x4 feet with stand writing material and sign bord design will be provided by deportment and sign board, stand and grouting materials provided by contractor. Sing board eill be provided by conrtacror except supplied as per sample provided by department.
58Photo and videography of before and after of the all work will be provioded bt the contracror in soft & hard coloured copy ( size 8x10\\" album ) and soft copy video in minimum 1080 P quality in pendrive in 3 set.
59Restoration Charges of existing utilities
60Telephone, Water Pipe Line, Sever Line etc.
61LT/HT Line
62Road cutting/restoration(PIT) (road cutting permission taken by contractor form authority)
63Installation of 33KV PPMC at foundation. Auxiliary item given by contractor.
64Earthing of 33KV PPMC complete as per schedule with 50x6 mm.G.I. Strip and Hot Dip Galvanised Earthing Pipe 60fit long All earthing material shall be provided by the Contractor except supplied material.
65Installation of 33KV CVT at Double pole. Auxiliary item ;angle channel,nut bolt given by contractor except supplied material and CVT.
66Earthing of 33KV CVT complete as per schedule with 50x6 mm.G.I. Strip and Hot Dip Galvanised Earthing Pipe 60fit long All earthing material shall be provided by the Contractor except supplied material.
67Installation of nuber plate,danger board, barbed wire etc. All material given by contractor except supplied material.
68Other Misc. work if any directed by Engineer-in-charge Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57344278
AUTHORITY Government Departments
TENDER VALUE 2.44 Crore
LAST DATE 10-09-2026
Authority
Authority Name Purvanchal Vidyut Vitaran Nigam Limited
Work Description Tender for Construction Of 33 Kv Independent Feeder From 220 Kv Cant Substation To Dr. Rajendra Prasad National Law University Near Iiit Jhawla, Prayagraj Under Eudd-Bamrauli On Semi Turn Key Basis.
Basic Detail
Tender No 16/EUDC-II/Pra/SE/2026-27
Bidding Type Tender
Location
City Prayagraj
State Uttar Pradesh
Key Dates
Publish Date 04 Sep 2026
Submission Date 10 Sep 2026
Open Date 10 Sep 2026
Finance
Tender Value 2.44 Crore
Tender Fee 5900
EMD 2.40 Lakhs
Exemption Not Available
Document List
95c4cb91-b9d2-492c-a54c-908bc226ec25.html
BOQ_2223036.xls
Tendernotice_1 (70).pdf
Tender_No_16.rar

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 04, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 10, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Sep 10, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 4 days

Tender Documents

Download All (ZIP) ↓
html

95c4cb91-b9d2-492c-a54c-908bc226ec25.html

xls

BOQ_2223036.xls

pdf

Tendernotice_1 (70).pdf

rar

Tender_No_16.rar

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders