Tender For Teacher Quarter At Higher Secondary School Herman.
Tender Value
37.52 Lakhs
Estimated cost
Bid Submission
14 Sep 2026
1 days left
EMD
75040
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shopian → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Teacher Quarter At Higher Secondary School Herman.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres All kinds of soil. |
| 2 | Providing and laying stone soling hand packed including spreading ,watering and maintaining level Including cost of material involved complete. |
| 3 | Providing and laying in position cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: Including cost of material involved complete. |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)Including cost of material involved complete. |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)Including cost of material involved complete. |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) Including cost of material involved complete. |
| 7 | Filling available excavated earth (excluding rock ) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. |
| 8 | Second class sand / boulder back filling in rooms handpacked including Ramming water in all complete. |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto & above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 10 | Centering and Shuttering including strutting, propping etc and removal of form for Foundations, footings, bases of columns etc. for mass concrete. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work for: suspended floors, roofs landings balconies and acess platforms |
| 12 | Centering and Shuttering including strutting, propping etc and removal of form work for lintel beams, plinth beams, girders, bressumers and cantilevers. |
| 13 | Centering and Shuttering including strutting, propping etc and removal of form work Walls ( any thickness) including attached pilasters butresses ,plinth and string courses etc. |
| 14 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) in superstructure above plinth level upto floor V-Level Including cost and carriage of material involved complete. |
| 15 | 12mm Cement plaster ( in fine sand) of mix 1:6 (1 cement: 6 fine sand) external including all carriage involved. |
| 16 | 15mm Cement plaster ( in fine sand) of mix 1:6 (1 cement: 6 fine sand) internal including all carriage involved. |
| 17 | Providing and applying of 2mm thick Wall putty over plastered surface to prepare the surface even and smooth complete. |
| 18 | Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20mm (average) thick base of cement mortar 1:4 (1cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with 16 mm Pink plain marble. |
| 19 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 600 x 600 mm. |
| 20 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 600 x 600 mm. |
| 21 | Cement Concrete Flooring in 1:2:4 (1 Cement : 2 Coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50mm thick with 20mm nominal size stone aggregate. |
| 22 | Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded. |
| 23 | Providing coloured corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.50 mm thick with zinc coating not less than 275 gram/m2 of required shade and colour as per engineer incharge including soffits and eaves boarding all complete. |
| 24 | Providing ridges or hips of width 60 cm over all width plain G.S sheets fixed with polymer coated J or L hooks.bolts and nuts 8mm dia G.I. limpet and bitumen washers complete 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 25 | Providing valleys of 90cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete 1.00 mm thick with zinc coating not less than 275 gram/m2 |
| 26 | Providing wood work in frames of doors, windows , clerestory windows and other frames ,wrought framed and fixed in position with holdfast lugs or with dash fasteners of required dia and length . Imported kail wood. |
| 27 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 35mm thick. Imported kail wood. |
| 28 | Providing and fixing wire gauze shutters using galvanized M.S.wire gauze of average width for aperture 1.4 mm in both directions with wire of dia 0.63 mm for doors, windows and clerestory windows with ISI marked M.S.pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge 35 mm thick Imported Kail Wood. |
| 29 | Providing and fixing float Glass Panes 4mm thick (weighing not less than 10kg/sqm) of complete job including Beadings, Nails etc. |
| 30 | Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of : 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848 and pre-laminated conforming to IS: 12823, Grade-I, Type-II marked |
| 31 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers' specifications Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90 litre /10 sqm over an under coat of primer applied @ 0.75 litre /10 sqm.of approved brand and manufacture. |
| 32 | Finishing walls with water proofing cement paint of required shade on Newwork (two or more coats applied @ 3.84kg/10sqm |
| 33 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @1.25 liter /10 sqm over and including one coat of special primer applied @ 0.75 liter / 10 sqm. |
| 34 | Providing and fixing stain less steel (Grade-304) railing made of Hollow tubes channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stain less steel nuts and bolts complete, including fixing the railing with necessary accessories and stain less steel dash fasteners, stain less steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stain less steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 35 | Providing and fixing of almunium hardware fittings of approved quality. |
| 36 | L Drop with locking system |
| 37 | L Drop |
| 38 | Tower bolt 150mm x 10mm |
| 39 | Tower bolt 100mm x 10mm |
| 40 | Handles 125mm |
| 41 | Handles 100mm |
| 42 | Hooks |
| 43 | Providing and fixing nickel plated M.S.pipe curtain rods with nickel plated brackets of 20 mm dia.(heavy type). |
| 44 | Providing and fixing of Cupboard/Ward robe of minimum depth of 600mm made up to 18mm thick one side decorative and other side balancing laminated high moisture resistant ply board in box, sides, top and bottom shelves with stain less steel hardware fittings of standard quality and make and as per direction of Engineer-in-Charge all complete. |
| 45 | Providing and Laying Conduits for Electric wiring,fan boxes Light boxes including bends,binding of conduits with binding wire complete.(FAN BOXES) |
| 46 | Providing and Laying Conduits for Electric wiring,fan boxes Light boxes including bends,binding of conduits with binding wire complete.(Light BOXES ) |
| 47 | Providing and Laying Conduits of required dia.for Electric wiring,Fan Boxes including bends,binding of conduits with binding wire of complete. (Conduits) |
| 48 | SANITARY AND PLUMBING ITEMS |
| 49 | Providing and fixing three layers PPR pipes confirming to IS: 15801, UV stabilized and anti-microbial fussion welded having thermal stability for hot and cold water supply including all ppr plain and brass threaded polypropylene random fitting.This includes testing of joints complete as the direction of Engineer Incharge. Internal work concealed fixing the pipe. PN-25 pipe, 15mm OD (SDR-7.4) |
| 50 | Providing and fixing three layers PPR pipes confirming to IS: 15801, UV stabilized and anti-microbial fussion welded having thermal stability for hot and cold water supply including all ppr plain and brass threaded polypropylene random fitting.This includes testing of joints complete as the direction of Engineer Incharge Internal work concealed fixing the pipe. PN-20 pipe, 20mm OD (SDR-7.4) |
| 51 | Supply, installation, testing and commissioning of gunmetal, male or female threaded isolation control valve of approved quality confirming to I S -778, PN10, with necessary specials, unions, nipple etc. 15mm dia. |
| 52 | Supply, installation, testing and commissioning of gunmetal, male or female threaded isolation control valve of approved quality confirming to I S -778, PN10, with necessary specials, unions, nipple etc. 20mm dia. |
| 53 | Providing and fixing PPR Unions 20mm. |
| 54 | Providing, fixing and laying G.I. pipes medium type complete with G.I fittings and clamps Including trenching and refilling etc ( external work). 25 mm dia Nominal Bore |
| 55 | Providing & Fixing first quality white vitreous china oval shaped (under counter) wash basin 550x400 mm for undercounter mounting, specially fabricated C.I/M.S brackets, painted with two or three coats of enamel paint of approved shade over a coat of primer, C.P waste and coupling, chain & rubber plug, P.V.C flexible 32 mm dia .waste pipe including cutting and making good wherever required of complete job. including Padestal. |
| 56 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 57 | Providing and laying water heater (GEYSERS) of standard quality and make including all fixture 50 ltr. |
| 58 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm |
| 59 | Providing and fixing health faucet of standard quality and make including all fixtures. |
| 60 | Providing & fixing C.P.toilet paper holder, with roller complete, including cutting and making good the walls wherever required. |
| 61 | Providing & Fixing C.P. Single lever 2 nos mixer for wash basin of approved make including cutting and making good the walls wherever required |
| 62 | Providing & Fixing C.P. wall mixer of approved make including cutting and making good the walls wherever required. |
| 63 | Providing and fixing of soap case of standard quality and make. |
| 64 | Providing and fixing of 600 mm long C P towel rods of standard quality and make. |
| 65 | Providing and fixing of bip cock of standard quality and make. |
| 66 | Providing and fixing angle value of standard quality and make including all accessories of complete job. |
| 67 | Providing and fixing of sink mixer of standard quality and make. |
| 68 | Providing and fixing of cockrach type C P grating of standard qualityand make 100mm. |
| 69 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 610x460mm bowl depth 200mm |
| 70 | DRAINAGE DISPOSAL SYSTEM |
| 71 | Earth work in excavation by Mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc.(not exceeding 1.5 m in width) shafts ,wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift up to 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed within a lead of 50 metres .All kinds of soil. |
| 72 | Supply & filling of dry stone soling hand packed under foundations including all carriages from source to site of work by mechanical transport / manual labour. |
| 73 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All works up to plinth level in 1:3:6mix. stone aggregate 20 mm nominal size). |
| 74 | Dry random masonry in foundation & plinth using nallah stone. Including all carriages involved. |
| 75 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) in superstructure above plinth level upto floor V-Level Including cost of material involved complete. |
| 76 | Reinforced cement concrete work in beams suspended floors, roofs having slope up to 15 degree, landings balconies, shelves, chajjas, lintels, bands, plain window sills, stair case and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and rienforcement with in1:1.5:3 mix. (1cement:1.5 coarse sand :3 graded crushed stone aggregate of 20 mm nominal size). |
| 77 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level (Thermo-Mechanically Treated bars of grade Fe-500 D. |
| 78 | Centering and shuttering including strutting, propping etc. and removal of form work for Suspended floors, roofs, landings, balconies and access plat form. |
| 79 | Cement concrete flooring in 1:2:4 mix. (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete 50 mm thick with 20 mm nominal size. |
| 80 | 15 mm cement plaster on the rough side of single or half brick wall with a floating coat of neat cement of mix 1:6 (1 cement : 6 fine sand). |
| 81 | Providing and fixing P.V.C. pipe and pipe fittings of the following nominal dia to P.V.C. Soil / Waste / Ventilating pipes |
| 82 | Pipe 100 mm |
| 83 | Floor trap 100 mm |
| 84 | Door T 100 mm |
| 85 | Coller 100 mm |
| 86 | Reducer 100x50mm |
| 87 | Pipe 75 mm |
| 88 | Floortrap 75mm |
| 89 | Door T 75mm |
| 90 | Collar 75 mm |
| 91 | Pipe 50 mm |
| 92 | PVC Waist pipe 10'' length. |
| 93 | Construction of 9'' thick brick masonary manholes in cement mortar (1:4) mix , foundation cement concrete ( 1:4:8) ,12 mm thick inside cement plaster with finishing ,making channels in cement concrete (1:2:4). including cost of manhole cover PVC ISI mark with frame size (1'-6\\"x 1'-6\\"x1'-6\\") inside size. |
| 94 | Providing and fixing of C I Man hole cover with frame of size 450 mm x 450 mm of With a frame of angle iron 50x50x5mm of approved quality and make complete. |
| 95 | Providing and fixing of master trap of approved quality and make. |
| 96 | Providing and fixing of tripple layer water storagetanks of approved quality and make viz.( SINTEX, NATIONAL, PLASTO etc) complete job. |
| 97 | Carriage of materials by mechanical transport including loading,unloading and stacking. |
| 98 | Sand average lead of 10 km |
| 99 | Stone aggregate average lead of 10 km |
| 100 | Electric Part |
| 101 | Wiring for lighting points/fan points/ exhaust fan points/call bell points with 1.5 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit, with 240V 6A modular switch , modular plate and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable, etc. as required. (Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent make ) incl. cost of conduit. |
| 102 | Wiring for light/power plug points (15/16A heating points) with 2x4 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit along with 1x4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing, etc. as required. (Maximum two points shall be connected on one circuit).(Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent ) incl. cost of conduit |
| 103 | Supplying and fixing of suitable size GI box with modular plate and modular cover in front on surface or in recess, including providing and fixing of 6 pin 16/20/25 A modular socket outlet and 16/20/25A modular switch, connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider or equivalent) |
| 104 | Supplying and fixing of suitable size GI box with modular plate and modular cover in front on surface or in recess, including providing and fixing of 2 no. 3 pin 5/6 A modular socket outlet and 2 no. 5/6A modular switch, connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider or eq.) |
| 105 | Supplying and fixing of modular sockets/ indicators/switches on existing modular plate and switch box , incl. connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider or eq.) |
| 106 | i. 3 pin 5A - 10A socket. |
| 107 | ii. indicator. |
| 108 | Point wiring for 5A -10A socket out lets (computer points) with 2x2.5 sq mm (P+N)FRLS PVC insulated 660/1100volt grade flexible stranded copper conductor wires in recessed or surface conduiting system and earthing the point with 1 x 2.5 sq. mm single core copper wire (loop earthing),(Maximum two points shall be connected on one circuit).(Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent) incl. cost of conduit |
| 109 | Providing, fixing, testing and commissioning of 9 Watt LED lamp (B22 cap), BEE/ISI approved, 230 V, cool daylight (6500 K), minimum efficacy 100 lm/W, complete with heavy-duty brass batten holder, including all fixing accessories, making electrical connections, testing and commissioning as required at site. (Havells/Wipro/Philips/Crompton/Bajaj or equivalent) |
| 110 | Supply, installation, testing and commissioning of 1 star 1200 mm sweep ceiling fans of Havells / Crompton Greaves/Bajaj/ Usha (Sample to be got approved), incl. cost of extension of GI rod (if required) and making of necessary connections. |
| 111 | Supply and fixing of two module stepped electronic fan regulator on the existing modular plate switch box, incl. connections but excluding modular plate etc. as reqd. |
| 112 | Supply, installation, testing and commissioning of 200-250 mm sweep shutter type exhaust fans, incl. cost of ceiling rose and making of space in walls/ windows as per site and necessary connections. (Havells/ Philips/ Crompton). |
| 113 | Supplying and fixing of modular blanking plates on existing modular plate and switch box ,excluding modular plate as required. |
| 114 | Wiring for sub mains along with earth wire in FRLS PVC insulated 660/1100 volt grade flexible stranded copper conductor wires in recessed or surface conduiting system, incl. cost of conduits(Havells/ Polycab/ Finolex/ Anchor/KEI/RR or equivalent). 2 x 2.5 sq.mm + 1x 2.5 sq. mm earth wire |
| 115 | Supply and fixing of 12 way Double door surface/ recess mounting , Horizontal type, 240 V, SPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs, excluding cost of MCBs and Incomer. . |
| 116 | Supply, installation, testing and commissioning of 5-32A single pole rating 240/415V, 10 KA “C” curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections. |
| 117 | Supply, installation, testing and commissioning of 32/40 A DP rating 240V, 10 KA “C” curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections. |
| 118 | Providing of chemical earthing as per IS standards by way of digging 8 feet pit then embedding 2.5 mtr. Long GI earthing electrode, 60 mm dia. Connecting the plate with main control board by 10 SWG Copper wire with 1/2” dia. Full thread brass nut and bolts and washers, refilling the pit with chemical compound. |
| 119 | Supply, laying, connecting and commissioning of 25 sq. mm 2 core PVC insulated and PVC sheathed power cable of 1.1 KV grade Aluminum LT cable , incl. cost of required al. thimbles duly crimped. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender